Filament Splicer
Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.
Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.
If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.
Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.
We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.
Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.
Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.
Availability
Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.
Open Source
Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.
9 Comments
Any plans to release drawings
Matt (not verified)
onWed, 10/28/2020 - 03:16
Permalink
Any plans to release drawings from this for people to home brew their own? This looks to be close to one of the best designs, a shame it never could come to be.
Any plans to release drawings
Matt (not verified)
onWed, 10/28/2020 - 03:16
Permalink
Any plans to release drawings from this for people to home brew their own? This looks to be close to one of the best designs, a shame it never could come to be.
Ccrraawwlleerrggoo@gmail.com
crawlergo@gmail.com (not verified)
onMon, 03/28/2022 - 22:10
Permalink
Ccrraawwlleerrggoo@gmail.com
Ccrraawwlleerrggoo@gmail.com
crawlergo@gmail.com (not verified)
onMon, 03/28/2022 - 22:10
Permalink
Ccrraawwlleerrggoo@gmail.com
C
crrawawlelerrgo... (not verified)
onFri, 04/01/2022 - 04:00
Permalink
C
C
crrawawlelerrgo... (not verified)
onFri, 04/01/2022 - 04:00
Permalink
C
Automate Your Website Content With This Robot?
lawan azad (not verified)
onThu, 12/08/2022 - 22:19
Permalink
Hi, artesea.ch I hope you are doing well with managing your website
And I Know How much it is time-consuming to write a good blog post for your website
But Did you know you can automate your website with a robot?
You can write a blog post automatically without writing a single paragraph.
For example, let's say you want to write a blog about 3D Printer.
In the software write ( write me content about Best 3D Printer For 2023)
Done, the robot gives you an entire blog post, and it is plagiarism-free
And you can try it here for free: www.jasper-robot.com
I hope you enjoy it, have a nice day.
Hello
darawan kamal (not verified)
onSat, 12/31/2022 - 20:17
Permalink
Hello, artesea.ch
As you may know, AdSense is a popular ad platform that allows website
owners to monetize their traffic by displaying ads on their sites. However,
there are many limitations to AdSense, including low payouts,
strict policies, and limited ad formats.
that is why we need an AdSense alternative.
with this Advertisement platform, you can earn more
money than you can with Adsense because it uses advanced
machine-learning algorithms to optimize your ad placements
and maximize your revenue
and there is no minimum page view requirement Every one can
Register and make money from it
See all the features here: https://15-days.net
Hello
talan kabar (not verified)
onMon, 01/30/2023 - 06:19
Permalink
Are you looking for an effective way to increase conversions and sales for your business?
ClickFunnels is an all-in-one platform that can help you create high-converting sales funnels,
launch marketing campaigns, and manage customer relationships. With the right tools and strategies,
ClickFunnels can help you maximize your website’s potential. From landing pages to automated follow-up emails,
ClickFunnels offers the features you need to get the most out of your website. With the ability to create custom funnels and campaigns,
you can target the right people and deliver the right messages.
ClickFunnels is easy to use and you can get started right away. With its drag-and-drop functionality and step-by-step tutorials,
you can quickly create the perfect funnel for your business. If you’re looking for an effective way to drive more sales and increase
your conversions, ClickFunnels is the perfect solution
You can try it for 14 Days for Free: www.wp-slider.xyz
Add your comment