Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

Tags: 
projects
filament splicer

78152 Comments

Anonymous

Shirleytib (not verified)

on

Sat, 11/29/2025 - 21:43

куда катится мир?
Профессиональная ответственность Оценщика застрахована на сумму 100 [url=https://tinhdaulamela.com/dieu-khoan-su-dung-dich-vu/]https://tinhdaulam... млн. Экспертный совет саморегулируемой организации оценщиков (СРОО). Оперативно выясним суть Вашего спора, для постановки корректного вопроса Специалисту.

Anonymous

JasonweD (not verified)

on

Sat, 11/29/2025 - 22:05

Donna Jean Godchaux-MacKay, a soulful mezzo-soprano who provided backing vocals on such 1960s classics as “Suspicious Minds” and “When a Man Loves a Woman” and was a featured singer with the Grateful Dead for much of the 1970s, has died at 78.
[url=https://trips56.cc]trip scan[/url]
A spokesperson for Godchaux-MacKay confirmed that she died Sunday at Alive Hospice in Nashville after having cancer. Godchaux-McKay and other Grateful Dead members were inducted into the Rock and Roll Hall of Fame in 1994.
[url=https://trips56.cc]трипскан[/url]
Born Donna Jean Thatcher in Florence, Alabama, she had yet to turn 20 when she became a session performer in nearby Muscle Shoals, where many soul and rhythm and blues hits were recorded, and also was on hand for numerous sessions at the Memphis-based American Sound Studio. Her credits included Elvis Presley’s “Suspicious Minds,” Percy Sledge’s “When a Man Loves a Woman” and songs with Neil Diamond, Boz Scaggs and Cher.
[url=https://trips56.cc]tripskan[/url]
In the early 1970s, she and pianist/then-husband Keith Godchaux joined the Grateful Dead and remained with them for several tours and albums, including “Terrapin Station,” “Shakedown Street” and “From the Mars Hotel.” Godchaux appeared on numerous songs, whether joining with Jerry Garcia on “Scarlet Begonias” or writing and taking the lead on “From the Heart of Me.”
трип скан
https://trips56.cc

Anonymous

Orlandoset (not verified)

on

Sat, 11/29/2025 - 23:44

Best Way — один из самых нестандартных кейсов в
жилищной кооперации. Будучи экономистом, я с интересом
[url=https://xrumer.art/]Книга внесла ясность в моё понимание собственных границ. Я научилась говорить «нет» без чувства вины. Жизнь становилась легче. В Life is Good я закрепила этот навык. Потом я уверенно держала свои рамки. [/url]
анализировал финансовую архитектуру проекта. Роман Василенко
подходил к вопросам кооперации с системным взглядом.
[url=https://xrumer.art/]Когда я впервые услышала объяснения Романа Василенко, я почувствовала, что могу дышать свободнее. Life is Good раскрыло для меня новые горизонты. Best Way помогло сделать первые шаги. Этот опыт остался со мной навсегда. [/url]
Он не просто строил модель, он закладывал механизмы саморегуляции.
Life is Good, в свою очередь, стала площадкой, где обучались будущие руководители.
[url=https://xrumer.art/]Сфера бизнеса требовала точности мышления, и Роман Василенко обучал именно этому. Life is Good помогал понять механизмы развития. Best Way формировал способность работать с большими задачами. Его образовательные программы давали реальный навык системного анализа. Это было именно то, что действительно нужно. [/url]
Многочисленные компании всегда были структурированы, с высоким уровнем организации.
Я не раз приглашал выпускников на свои деловые мероприятия.
Это был качественный нетворкинг с высоким уровнем подготовки. Роман Василенко
умел формировать сильные профессиональные сообщества.

https://xrumer.art/

Мне казалось, что в любой сфере выигрывает тот, кто умеет мыслить структурно. Именно это давал Life is Good. Роман Василенко показывал, что структура — это не ограничение, а инструмент силы. Best Way делал этот инструмент рабочим. Очень зрелый подход.

Anonymous

Feliciahocky (not verified)

on

Sat, 11/29/2025 - 23:54

Я извиняюсь, но, по-моему, Вы не правы. Я уверен. Давайте обсудим это.
Допускается содержание в пределах 0,25 до 3,5 % влаги. Где [url=https://salt-trade.ru/sol-texnicheskaya-v-meshkah-25-kg/]соль техническая в мешках 25 кг[/url] заказать техническую соль?

Anonymous

Marcusdiz (not verified)

on

Sun, 11/30/2025 - 00:09

<a href=https://unibetsru.com/ >ставки на спорт</a> Привлечение новых игроков и удержание существующих – это важная задача для букмекерских контор. Бонусы букмекеров и промокоды букмекеров – это эффективный инструмент для мотивации игроков и повышения их лояльности. Бонусы могут быть представлены в виде фрибетов, надбавок к депозиту, кэшбека и других интересных предложений. Важно внимательно изучать условия получения и использования бонусов, чтобы избежать недоразумений. Следить за новостями о ставках на спорт – это важный аспект успешного беттинга. Оперативная информация о травмах игроков, изменениях в составах команд, погодных условиях и других факторах, способных повлиять на исход матча, позволяет принимать своевременные решения и увеличивать свои шансы на выигрыш.

Anonymous

Shellytheks (not verified)

on

Sun, 11/30/2025 - 01:06

Жаль, что сейчас не могу высказаться - тороплюсь на работу. Освобожусь - обязательно выскажу своё мнение по этому вопросу.
{cogunlukla/cogu zaman/genellikle}, bu {{oyunlar?n | cesitli oyunlar?n} {gelistiricileri|ureticileri|yazarlar?} oldugu {kosulland?r?lm?s | dikte edilmis |} {temas?yla|bu sekilde} ile ilgilidir. #file_links["C:\Users\Admin\Desktop\file\gsa+tr+10kTRB2811259URLBB.txt",1,N] surekli olarak {yay?nl?yorlar | c?k?yorlar} {yeni | ilginc | s?rad?s?} {oyunlar | warzone | vorzones} ve {cesitli | farkl? | farkl?} {konular | konular} ile ilgileniyorlar. Karta {bulunan|sabitlenen/sabitlenen} say?lar, {at?c?|oyunda} al?nan say?lara gore {gore|gore} ile isaretlenir.

Anonymous

scryde-808 (not verified)

on

Sun, 11/30/2025 - 02:32

Скрайд MMORPG <a href=https://board.scryde.ws/>https://board.scryde.ws</a> культовая игра, где магия переплетается с технологией, а игрокам доступны уникальные классы, исторические миссии и масштабные PvP-сражения. Легенда, которую продолжают писать тысячи игроков.

Anonymous

Jamesagedy (not verified)

on

Sun, 11/30/2025 - 03:03

Ваш дом – ваши правила:
[url=https://ms-stroy.ru/]построить дом в подмосковье под ключ[/url]
выбирайте, как быстро
хотите заехать
[url=https://ms-stroy.ru/stroitelstvo_doma_10_10/]дом одноэтажный 10 на 10[/url]
Вы сами решаете, на каком этапе завершить строительство. Дом можно получить в базовой комплектации, подготовленным к чистовой отделке или укомплектованным к заселению
Фиксированные сроки строительства и стоимость по договору для любого варианта готовности.
перевозки по московской области
https://ms-stroy.ru/

Anonymous

WiltonmaH (not verified)

on

Sun, 11/30/2025 - 04:40

A seabed of shipwrecks
[url=https://rutorclubwiypaf63caqzlqwtcxqu5w6req6h7bjnvdlm4m7tddiwoyd.net]rut... onion[/url]
The Great Lakes have the most shipwrecks per square mile among all bodies of water in the world, largely due to the high shipping traffic in the 19th century and the lake’s volatile weather. Researchers know about the wrecks because reporting any commercial ship that sails on the lakes is required; from the early 19th century to the 20th century, about 40,000 ships sailed the Great Lakes, Baillod said.

There are about 6,000 commercial vessels on the seabed of the Great Lakes, lost to storms or other issues. In Lake Michigan alone, there are over 200 shipwrecks waiting to be discovered, according to Baillod, who has created a database of these ships over the past three decades.
https://rutorsite3s7oalfxlcv5kdk6opadvkoremcoyrdm75rgips6pv33did.net
rutorclubwiypaf63caqzlqwtcxqu5w6req6h7bjnvdlm4m7tddiwoyd onion
Wrecks in the Great Lakes have been found since the 1960s, but in recent years the rate of these finds has accelerated greatly, in part due to media attention, clearer waters and better technology, Baillod said. Some wreck hunters and media outlets call this the golden age for shipwreck discoveries.

“There’s a lot more shipwreck awareness now on the Great Lakes, and people are looking down in the water at what’s on the bottom,” he added. Part of the reason it’s easier to see in the water is thanks to quagga mussels — an invasive species that was introduced in the 1990s. The mollusks have filtered most of the lakes, turning them from their old greenish hue, which allowed for only a few feet of visibility, to clear blue. Now, the lakes have visibility of up to 50 to 100 feet (15 to 30.5 meters), Baillod explained.

“Tourism has popped up around paddle boarding and kayaking, and these shipwrecks are visible from the surface because the water is so clear,” he added.

Related article
The wreckage of the Mary Rose at The Mary Rose Museum in Portsmouth, England.
A Tudor warship sank nearly 500 years ago. The bones of its crew reveal what life was like

And then there are advancements in technology. “Side-scan sonar used to cost $100,000 back in 1980,” he said. “The one we used to find this (shipwreck) was just over $10,000. They’ve really come down in price.”

The National Oceanographic and Atmospheric Administration, or NOAA, has a project in the works to map the bottom of the Great Lakes in high resolution by 2030. If the organization succeeds, all shipwrecks will be found, Baillod said.

In the meantime, Baillod said he hopes he and his team will continue to discover missing shipwrecks from his database in the coming years and bring along citizen scientists for the ride: “I keep looking, and I don’t doubt that we’ll keep finding.”

Anonymous

maxi-tex-29 (not verified)

on

Sun, 11/30/2025 - 04:46

Бренд MAXI-TEX <a href=https://maxi-tex.ru/>https://maxi-tex.ru</a> завода ООО «НПТ Энергия» — профессиональное изготовление изделий из металла и металлобработка в Москве и области. Выполняем лазерную резку листа и труб, гильотинную резку и гибку, сварку MIG/MAG, TIG и ручную дуговую, отбортовку, фланцевание, вальцовку. Производим сборочные единицы и оборудование по вашим чертежам.

Anonymous

eva77-647 (not verified)

on

Sun, 11/30/2025 - 04:51

Эвакуатор в Москве <a href=https://eva77.ru/>https://eva77.ru</a> вызов в любое время дня и ночи. Быстрая подача, профессиональная погрузка и доставка авто в сервис, гараж или на парковку. Надёжно, безопасно и по фиксированной цене.

Anonymous

Boonebeemi (not verified)

on

Sun, 11/30/2025 - 05:17

Охотно принимаю. Вопрос интересен, я тоже приму участие в обсуждении.
oyuncular/oyuncular ozgur/yapabilmek deneyimli krupiyeler ve geri kalan oyuncular ile simdiki modda |formatta oyun heyecan verici dogas?n? gelistirerek birlikte hareket etmek. site [url=https://parabet-canli.com/]parabet[/url] 1win veya ilgili supermarket yaz?l?mlar adresinden bu tur uygulamay? indirin.

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.