Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

Tags: 
projects
filament splicer

59869 Comments

Anonymous

Quincyfub (not verified)

on

Wed, 10/01/2025 - 12:53

Target is in trouble. And while it’s easy to get lost in the company’s recent (poor) handling of American culture war narratives that cast it as too “woke” or too willing to cave to online fascists, the root of Target’s problems runs deep.
[url=https://tripsca43.win]трипскан сайт[/url]
Don’t get me wrong – the massive consumer boycotts from Black organizers have done damage. And there are probably folks on the far right who think even Target’s toned-down, overwhelmingly beige Pride merch this year was still too loud.
https://tripsca43.win
tripskan
But its stock is in the gutter and sales have been falling for two years because of good ol’ business fundamentals. It overstocked. It lost the pulse of its customers. It went up against Amazon Prime with… actually, does anyone know what Target’s Amazon Prime competitor is called?
The brand we petite bourgeoisie once playfully referred to as Tar-zhay has lost its spark. The company reported a decline in sales for a third-straight quarter, part of a broader trend of falling or flat sales for two years. Employees have lost confidence in the company’s direction. And 2025 has been a particularly rough financially, as Black shoppers organized a boycott over Target’s decision to cave to right-wing pressure on diverse hiring goals.
Shares were down 10% Wednesday.

It’s not to say the new guy, Michael Fiddelke, is unqualified. He’s been at Target since he started as an intern more than 20 years ago, after all. But Wall Street is clearly concerned that Target’s leadership is underestimating the severity of the need for a significant change— just as President Donald Trump’s tariffs on imported goods threaten the entire retail industry.

Appointing a company lifer “does not necessarily remedy the problems of entrenched groupthink and the inward-looking mindset that have plagued Target for years,” Neil Saunders, an analyst at GlobalData Retail, said in a note to clients Wednesday.

Missing the mark
In its 2010s heyday, Target became a go-to for consumers who liked a bargain but didn’t necessarily like bargain-hunting. The shelves felt well-curated. You’d go to Target because it had one thing you needed and 12 things you didn’t know you needed. It was stocked with Millennial cringe long before Gen Z gave us the term Millennial cringe.

Target’s sales held strong through the pandemic as remote workers set up home offices and stocked up on essentials. Months of lockdown also benefited the store as people began refreshing their spaces because they didn’t really have much else to do and they were staring at the same walls all the time.

Anonymous

kramarketFef (not verified)

on

Wed, 10/01/2025 - 12:56

KRAKEN давно укрепил репутацию, а <a href=https://kramarket.cc/>онион адрес кракен маркетплейса</a> стал частью этой стабильности. Пользователи знают: через него можно безопасно зайти. И доверие к площадке только растёт.

Anonymous

kramarketFef (not verified)

on

Wed, 10/01/2025 - 12:56

Постоянные блокировки не мешают, если у тебя есть АНКОР. Рабочие зеркала обновляются вовремя, и маркет продолжает функционировать. Поэтому ресурс удерживает репутацию надёжного.

Anonymous

Jacobopick (not verified)

on

Wed, 10/01/2025 - 13:24

Ваши посты про сезонные скидки помогают экономить! Уже заказала розы на следующий Новый год со скидкой 30%!
<a href=https://t.me/cvetaevatomskru/378>купить цветы в томске</a>

Anonymous

JacobTib (not verified)

on

Wed, 10/01/2025 - 13:40

Ваши фото букетов с добавлением сухоцветов вдохновили на заказ осенних роз для учительницы - очень стильно получилось!
<a href=https://t.me/cvetaevatomskru/290>доставка цветов в томске</a>

Anonymous

JacobTib (not verified)

on

Wed, 10/01/2025 - 13:54

Спасибо за идеи с дополнениями к розам! Добавила к букету на 14 февраля мягкую игрушку - получился идеальный подарок!
<a href=https://t.me/cvetaevatomskru/290>доставка цветов</a>

Anonymous

ShadowGlimmerZ3apold (not verified)

on

Wed, 10/01/2025 - 14:07

J’ai un coup de foudre pour Casombie, c’est une experience qui reveille les sens. Le catalogue est une crypte de tresors, comprenant des jeux adaptes aux cryptomonnaies. Le service client est d’une efficacite surnaturelle, offrant des solutions claires comme un clair de lune. Les transactions sont fluides et fiables, cependant plus de promos macabres seraient un plus. Au final, Casombie est une plateforme qui fait battre les c?urs pour les joueurs en quete de frissons ! En bonus la navigation est intuitive comme une malediction, donne envie de revenir hanter le site.
<a href=https://manjarresinsuranceagency.com/casombie-casino-probabilites-et-tac... casombie</a>|

Anonymous

GlintVortexM2apold (not verified)

on

Wed, 10/01/2025 - 14:09

Je suis totalement hypnotise par Freespin Casino, on dirait un festival de frissons eclatants. Il y a une cascade de jeux envoutants, comprenant des jeux parfaits pour les cryptomonnaies. Le suivi est d’une clarte lumineuse, repondant en un flash. Le processus est lisse comme une orbite, mais les offres pourraient etre plus eclatantes. Pour resumer, Freespin Casino est une plateforme qui illumine l’esprit pour ceux qui cherchent des frissons lumineux ! Par ailleurs la navigation est intuitive comme un rayon lunaire, ce qui rend chaque session absolument electrisante.
<a href=https://dev-grla-monroeorg.pantheonsite.io/free-spin-casino-probabilites... casino spin free</a>|

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.