Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

Tags: 
projects
filament splicer

52255 Comments

Anonymous

criskis7apold (not verified)

on

Sat, 09/20/2025 - 20:42

J’apprecie enormement 7BitCasino, il offre une sensation de casino unique. La selection de jeux est colossale, proposant des jeux de table elegants et classiques. Le support est ultra-reactif et professionnel, joignable a toute heure. Le processus de retrait est simple et fiable, bien que les bonus pourraient etre plus reguliers, ou des tournois avec des prix plus eleves. Globalement, 7BitCasino est une plateforme d’exception pour les amateurs de casino en ligne ! En bonus la navigation est intuitive et rapide, facilite chaque session de jeu.

<a href=https://campoal.com/backend/entschlusseln-sie-gewinnchancen-im-7bitcasin... bonus</a>|

Anonymous

goofybeetle9apold (not verified)

on

Sat, 09/20/2025 - 20:42

Ich liebe die Pracht von King Billy Casino, es pulsiert mit einer koniglichen Casino-Energie. Es gibt eine Flut an mitrei?enden Casino-Titeln, mit einzigartigen Casino-Slotmaschinen. Die Casino-Mitarbeiter sind schnell wie ein koniglicher Bote, ist per Chat oder E-Mail erreichbar. Casino-Zahlungen sind sicher und reibungslos, trotzdem mehr regelma?ige Casino-Boni waren koniglich. Zusammengefasst ist King Billy Casino ein Casino, das man nicht verpassen darf fur Fans moderner Casino-Slots! Ubrigens das Casino-Design ist ein optisches Kronungsjuwel, das Casino-Erlebnis total veredelt.
<a href=https://live-metacrylics-energy-efficient-coatings.pantheonsite.io/blog/... billy sister casino</a>|

Anonymous

Antoniopiz (not verified)

on

Sat, 09/20/2025 - 20:48

<a href=https://tdbbc.ru/>оптом подшипник цена</a> Подшипники от производителей: Этот запрос свидетельствует о предпочтении пользователя приобретать подшипники напрямую у заводов-изготовителей, минуя посредников. Покупка у производителей может предоставить ряд преимуществ, включая более низкие цены, гарантию качества, возможность получения технической поддержки и доступ к информации о новых разработках. Однако не все производители работают с розничными покупателями или небольшими оптовыми заказами. Поиск подшипников от производителей требует проведения маркетингового исследования, выявления заводов, специализирующихся на производстве требуемых типов подшипников, и установления с ними прямых контактов для обсуждения условий сотрудничества. Важно учитывать минимальные объемы заказов, условия оплаты и сроки поставки, а также наличие сертификатов качества и соответствия продукции международным стандартам.

Anonymous

fuzzypanda7apold (not verified)

on

Sat, 09/20/2025 - 21:12

Je suis carrement scotche par Gamdom, ca donne une energie de jeu demente. Il y a un tsunami de titres varies, offrant des machines a sous ultra-cool. Le service client est une tuerie, offrant des reponses qui petent. Les gains arrivent en mode TGV, par contre plus de tours gratos ca serait ouf. Bref, Gamdom c’est du lourd a tester direct pour ceux qui kiffent parier avec style ! Cote plus l’interface est fluide et stylee a mort, donne envie de replonger non-stop.
<a href=https://dekomare.de/guide-ultime-de-gamdom-casino-probabilites-et-plaisi... nas?l girilir</a>|

Anonymous

Raymondwhiff (not verified)

on

Sat, 09/20/2025 - 21:29

<a href=https://anastasia-rechanskaya.ru/>запуск нового продукта на рынок</a> Продвижение бренда в интернете / Продвижение компании в интернете: Подчеркивают необходимость онлайн-присутствия и продвижения для бизнеса. Важно предложить комплексные решения по продвижению брендов и компаний в интернете, включая SEO, SMM, контент-маркетинг, таргетированную рекламу, контекстную рекламу и многое другое. Необходимо учитывать особенности каждой платформы и разрабатывать индивидуальные стратегии для каждой компании.

Anonymous

Raymondwhiff (not verified)

on

Sat, 09/20/2025 - 21:36

<a href=https://anastasia-rechanskaya.ru/>запуск нового продукта на рынок</a> SEO продвижение сайта wordpress: Указывает на необходимость оптимизации сайта, созданного на платформе WordPress, для поисковых систем. Важно предложить специализированные услуги по SEO-продвижению сайтов на WordPress, учитывая особенности этой платформы.

Anonymous

Domain Rating (not verified)

on

Sat, 09/20/2025 - 21:50

<a href=https://kwork.com/integrated-promotion/20384154/3-domain-rating>+3 Domain Rating</a>
Inbound links to your site on a wide range of resources.

We use only sources from which there will be zero complaints from the admins!!!

Generating backlinks in 3 simple steps

Stage 1 – Backlinks to blog posts (Publishing an piece of content on a subject with an anchored and non-anchor link)

Phase 2 – Links through redirection links of authoritative websites with page rank DR 9-10, e.g.

Stage 3 – Submitting an example on backlink analysis tools -

Analysis platforms submit the sitemap to the search crawlers, and this is very important.

Explanation for step 3 - only the main page of the site is placed on the analyzers; secondary pages cannot be submitted.

I perform these 3 stages in order, in all there will be 20,000-30,000 quality links from three stages.

This SEO tactic is the most powerful.

I will send the link data on parsing sites in a document.

List of analysis tools hundreds of pieces.

Send a link building report via majestic, semrush , or ahrefs If one of the services has fewer backlinks, I report using the tool with the highest number of links because what's the point of the delay?

Anonymous

RichardBaide (not verified)

on

Sat, 09/20/2025 - 22:31

<a href=https://ocia.org>кракен onion сайт</a> kraken onion, kraken onion ссылка, kraken onion зеркала, kraken рабочая ссылка onion, сайт kraken onion, kraken darknet, kraken darknet market, kraken darknet ссылка, сайт kraken darknet, kraken актуальные ссылки, кракен ссылка kraken, kraken официальные ссылки, kraken ссылка тор, kraken ссылка зеркало, kraken ссылка на сайт, kraken онион, kraken онион тор, кракен онион, кракен онион тор, кракен онион зеркало, кракен даркнет маркет, кракен darknet, кракен onion, кракен ссылка onion, кракен onion сайт, kra ссылка, kraken сайт, kraken актуальные ссылки, kraken зеркало, kraken ссылка зеркало, kraken зеркало рабочее, актуальные зеркала kraken, kraken сайт зеркала, kraken маркетплейс зеркало, кракен ссылка, кракен даркнет

Anonymous

LouisHasia (not verified)

on

Sun, 09/21/2025 - 00:08

<a href=" https://images.google.tl/url?q=https://clearmedshub.shop "></a> and <a href=" https://afafnetwork.com/user/tipwkmhvna/?um_action=edit "></a>
http://www.reko-bioterra.de/url?q=https://clearmedshub.shop and https://wowanka.com/home.php?mod=space&uid=518775
[url=http://nsreg.com/?a[]=<a+href=http://pharmalibrefrance.com>how+can+i+buy... and [url=http://wamoja.com/community/profile/lskgsizojb/][/url]

Anonymous

JamesEmpot (not verified)

on

Sun, 09/21/2025 - 00:24

ed online treatment <a href=" https://www.buscocolegio.com/Colegio/redireccionar-web.action?url=https:... ">top rated ed pills</a> and online erectile dysfunction pills <a href=" http://njmoli.com/home.php?mod=space&uid=1913 ">cheapest ed treatment</a>
https://www.blogarama.com/redirect.php?destination=http://bluepharmafran... erectile dysfunction online or http://lostfilmhd.com/user/jwzkhsjpxt/ buying ed pills online
[url=http://images.google.com.om/url?q=https://vitaledgepharma.shop]ed online meds[/url] generic ed meds online or [url=http://umsr.fgpzq.online/home.php?mod=space&uid=124524]ed meds online[/url] buy erectile dysfunction pills online

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.