Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

Tags: 
projects
filament splicer

51704 Comments

Anonymous

DanielDum (not verified)

on

Thu, 09/18/2025 - 23:22

[b]Personally comprehend[/b] how intimidating that seems at the moment flood puts their house as well as loved ones’ comfort into danger.
[b]Yet[/b] you continue by no means solitary.
[b]We remain[/b] ready aiming to safeguard their home as well as this kindness of their loved ones existence, performing attentively plus protectedly so everything someone love continues unbroken.
[b]Such[/b] team responds immediately toward end devastation together with prevent mold, granting one serenity regarding spirit.
[b]Also[/b] together with the always-on support, you perpetually possess a helper by one’s position — set aiming to support yourself preserve their family secure plus yours dwelling filled by convenience.
[b]Find peace in your home[/b] - [u]Call: 8338561951[/u]

Anonymous

vinci spin (not verified)

on

Thu, 09/18/2025 - 23:23

Hey guys,

I've been diving into the world of virtual casinos lately, and I’ve gotta say — it’s pretty damn addictive. At first, I was honestly suspicious. I mean, how do you even trust an online platform with your money, right? But after doing a ton of research (and trying out a few questionable sites so you won’t have to), I figured out a few things that set apart a reliable casino from a risky mess. First off, if you’re new to all this, here’s the golden rule: **licenses matter**. If a casino doesn’t have a proper regulatory certificate (like from the Malta Gaming Authority or the UKGC), just run. No bonus is worth the gamble of never seeing your funds again. Also — and I know no one wants to — read the T&Cs. That’s the only way to know what kind of wagering requirements they’ve slapped onto those so-called “juicy” bonuses.

Now, let me share a site I’ve been using these last few weeks. It’s been a breath of fresh air. The interface? Super clean. Payouts? Quick — like 24 hours quick. And the game selection? *Insane*. Slots, live dealers, blackjack, even some oddball options I hadn’t tried before. Check it out here: <a href="https://forums.insta360.com/section/14/post/87849/">vinci spin</a> . What really impressed me was the customer service. I had a tiny issue with a bonus not working, and they got back to me in like no time. Compare that to other sites where you’re just shouting into the void — yeah, hard pass.

Also, if you’re into bonuses (and who isn’t?), this place offers some legit ones. But here’s the trick: don’t just grab every shiny offer. It’s smarter to stick to fair terms than a huge bonus you’ll never be able to withdraw. I’m not saying you should go and blow your whole paycheck — please don’t. But if you’ve got a little extra cash and you’re looking for a fun way to unwind, online casinos can totally deliver. Just stay sharp, set a budget, and don’t treat it like a side hustle. It’s for fun, not for a paycheck. Anyway, just wanted to drop my experience here in case anyone’s curious or trying to find a trustworthy place to play. If you’ve got your own recommendations or even some casino nightmares, I’m all ears — love talking shop about this stuff.

Good luck out there, and don’t let the house win too much ??

Anonymous

DanielDum (not verified)

on

Fri, 09/19/2025 - 00:14

[b]Myself understand[/b] the way intimidating the matter seems when moisture puts one’s house and kin’s comfort at risk.
[b]But[/b] you are by no means by yourself.
[b]We have been[/b] here to defend your residence as well as that kindness belonging to your kin existence, performing cautiously along with securely such that every single thing you treasure stays intact.
[b]Such[/b] group responds immediately to cease harm along with stop spores, giving you relief regarding mind.
[b]Also[/b] supported by our round-the-clock aid, one forever get a person close to the company — set toward support somebody keep the relatives sheltered together with yours house supplied with security.
[b]Find peace in your home[/b] - [u]Call: 8338561951[/u]

Anonymous

7 (499) 638-25-37 (not verified)

on

Fri, 09/19/2025 - 00:53

Электрокарниз — это идеальное решение для вашего дома, которое позволяет легко управлять шторами с помощью пульта.
Также необходимо определить, какие шторы вы планируете использовать.

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.