Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

Tags: 
projects
filament splicer

50350 Comments

Anonymous

DanielDum (not verified)

on

Sun, 09/14/2025 - 20:34

[u][b]Water Damage Mitigation Service[/b][/u] centers at helping house dwellers promptly addressing water-related problems.
[b][u]The chief intention[/u][/b] remains aiming to cease further harm, maintain redeemable possessions, moreover return livability at the home.
[b][u]Such support[/u][/b] is commonly essential after incidents for example pipe breaks, heavy rainfall, overflow, hurricanes, or diverse environmental events enabling let water through seep inhabited environments.
[b][u]Visualize an scenario[/u][/b] in which a line leaks plus an downpour overwhelms a building, devastating walls, wetting belongings, and prone to fostering fungus when unaddressed.
[u][b]Prompt measure[/b][/u] becomes crucial for limit casualties and contain increasing restoration expenses. Regarding which ways might us assist?
[u][b]Specialist professionals reach[/b][/u] promptly for extract extra dampness, fully dehydrate affected affected zones, and defend property property preventing mold formation or else more decay.
[u][b]In essence[/b][/u], this procedure stabilises that abode furthermore verifies the safety post that episode . Such assistance avoids comprehensive rebuilding however establishes the groundwork to following upgrades concurrently mitigating more grave setbacks later such horizon.
[b][u]Get our help right now - 8338561951[/u][/b]

Anonymous

RichardBaide (not verified)

on

Sun, 09/14/2025 - 21:35

<a href=https://www.colabinc.com>блэкспрут не работает</a> blacksprut блэкспрут black sprut блэк спрут blacksprut вход блэкспрут ссылка blacksprut ссылка blacksprut onion блэкспрут сайт блэкспрут вход блэкспрут онион блэкспрут дакрнет blacksprut darknet blacksprut сайт блэкспрут зеркало blacksprut зеркало black sprout blacksprut com зеркало блэкспрут не работает blacksprut зеркала как зайти на blacksprut

Anonymous

DanielDum (not verified)

on

Sun, 09/14/2025 - 21:43

[u][b]Water Damage Mitigation Service[/b][/u] centers upon facilitating inhabitants swiftly managing water-related concerns.
[b][u]Service's principal goal[/u][/b] remains intended to cease further detriment, protect recoverable belongings, moreover renew habitability at that house.
[b][u]This kind of assistance[/u][/b] is typically required post occurrences such as water line bursts, heavy downpour, overflow, storms, as well as diverse weather-related disasters allowing enable moisture to infiltrate living zones.
[b][u]Imagine a circumstance[/u][/b] where a pipe breaks alternatively an heavy rain swamps a house, ruining partitions, saturing belongings, and possibly fostering mildew in case unaddressed.
[u][b]Fast measure[/b][/u] is crucial to limit casualties plus check growing reconstruction expenses. Concerning the methods might us aid?
[u][b]The crew show up[/b][/u] rapidly aiming to pump out surplus dampness, thoroughly dehydrate affected impacted areas, also guard property structure opposing mold spread as well as extra disintegration.
[u][b]Fundamentally[/b][/u], our intervention stabilizes the dwelling plus verifies their usability post such incident . Our help eschews complete reconstruction though lays the groundwork intended for subsequent upgrades concurrently averting increased intense setbacks down that horizon.
[b][u]Get our help right now - 8338561951[/u][/b]

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.