Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

Tags: 
projects
filament splicer

45688 Comments

Anonymous

Robertogroow (not verified)

on

Fri, 08/22/2025 - 14:28

<a href=https://trip-scan.win/>сайт трипскан</a> Сайт трипскан – это интуитивно понятный интерфейс, подробные описания направлений, отзывы путешественников и полезные советы, помогающие сделать осознанный выбор и избежать неприятных сюрпризов.

Anonymous

AlfonzoJancy (not verified)

on

Fri, 08/22/2025 - 15:26

Атмосферный <a href="https://займ-рум.рф/">101 Lions</a> подарит незабываемые впечатления.

Anonymous

plinko (not verified)

on

Fri, 08/22/2025 - 17:08

Hey guys,

I've been exploring the world of online casinos lately, and I’ve gotta say — it’s surprisingly fun. At first, I was super skeptical. I mean, how do you even trust an online platform with your money, right? But after testing the waters (and trying out a few questionable sites so you don’t have to), I figured out a few things that set apart a trustworthy casino from a risky mess. First off, if you’re new to all this, here’s the golden rule: **licenses matter**. If a casino doesn’t have a proper legal status (like from the MGA or the UKGC), just run. No bonus is worth the gamble of never seeing your money again. Also — and I know no one wants to — read the T&Cs. That’s the only way to know what kind of wagering requirements they’ve slapped onto those so-called “generous” bonuses.

Now, let me share a site I’ve been using these last few weeks. It’s been a breath of fresh air. The interface? Super clean. Payouts? Fast as hell. And the game selection? *Wild*. Slots, live dealers, blackjack, even some oddball options I hadn’t tried before. Check it out here: <a href="https://support.displaylink.com/forums/287786-displaylink-feature-sugges... . What really stood out was the support team. I had a tiny issue with a bonus not working, and they got back to me in like no time. Compare that to other sites where you’re just shouting into the void — yeah, hard pass.

Also, if you’re into bonuses (and who isn’t?), this place offers some legit ones. But here’s the trick: don’t just grab every shiny offer. It’s smarter to stick to clear terms than a huge bonus you’ll never be able to withdraw. I’m not saying you should go and bet the farm — please don’t. But if you’ve got a little extra spending money and you’re looking for a fun way to unwind, online casinos can totally deliver. Just play smart, set a budget, and don’t treat it like a side hustle. It’s for fun, not for a paycheck. Anyway, just wanted to drop my experience here in case anyone’s interested or trying to find a trustworthy place to play. If you’ve got your own stories or even some casino nightmares, I’m all ears — love talking shop about this stuff.

Good luck out there, and may the odds be ever in your favor ??

Anonymous

Jamesassop (not verified)

on

Fri, 08/22/2025 - 18:40

lasix generic name <a href=" https://focuscouples.org/user/argjowsflm/?um_action=edit ">furosemide 40 mg</a> or <a href=" https://www.finanzplaner-deutschland.de/fpdeu/inc/mitglieder_form.asp?nr... ">lasix 40 mg</a>
https://60.viromin.com/index/d1?diff=0&utm_clickid=9sg408wsws80o8o8&aurl... lasix generic name
[url=https://maps.google.st/url?sa=t&url=https://cardiomedsexpress.com]furose... furosemide 100mg and [url=https://www.pornharlot.net/user/cbjmyjltpw/videos]lasix 100 mg tablet[/url] lasix for sale

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.