Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

Tags: 
projects
filament splicer

42655 Comments

Anonymous

DanielDum (not verified)

on

Fri, 08/15/2025 - 21:50

[b]Full Throttle Summer Savings Event![/b]
[b]But are up discounts[/b] - on from and ready-to-fly [b]DJI[/b], [b]GEPRC[/b], [b]RadioMaster[/b], [b]Ethix[/b], [b]TBS[/b], [b]Lumenier[/b], [b]Flywoo[/b], [b]EMAX[/b] and stick now before!
[url=https://psee.io/7zu6yq][b]GetFPV’s Full Throttle Summer Savings event is on![/b][/url]

Anonymous

NatalyBug (not verified)

on

Fri, 08/15/2025 - 21:53

Какие отличные собеседники :)
Играю тут не первое десятилетие и вне это время успел оценить преимущества: моментальные депозиты, разнообразный выбор слотов, [url=https://1win-sll.online/]1win скачать[/url] удобное мобильное приложение.

Anonymous

CalebPar (not verified)

on

Fri, 08/15/2025 - 22:49

<a href=https://tenzip.ru/tag/%D0%97%D0%B0%D0%BF%D1%87%D0%B0%D1%81%D1%82%D0%B8+%...Запчасти для холодильника ELECTROLUX ERO2921</a> Запчасти для плиты Flama AE 1406: Готовьте с удовольствием. Неисправная плита – это не повод отказываться от любимых блюд. Замените вышедшие из строя детали и наслаждайтесь кулинарными шедеврами.

Anonymous

Site - Mn (not verified)

on

Sat, 08/16/2025 - 00:52

Hey guys,

I've been exploring the world of online casinos lately, and I’ve gotta say — it’s surprisingly fun. At first, I was honestly suspicious. I mean, how do you even believe in an online platform with your hard-earned money, right? But after spending hours researching (and trying out a few sketchy sites so you can avoid that mess), I figured out a few things that separate a trustworthy casino from a total scam. First off, if you’re new to all this, here’s the golden rule: **licenses matter**. If a casino doesn’t have a proper license (like from the Malta Gaming Authority or the UKGC), just close that tab. No bonus is worth the risk of never seeing your funds again. Also — and I know no one wants to — read the T&Cs. That’s the only way to know what kind of hidden traps they’ve slapped onto those so-called “juicy” bonuses.

Now, let me share a site I’ve been hooked on these last few weeks. It’s been a breath of fresh air. The interface? Super easy to navigate. Payouts? No waiting around. And the game selection? *Wild*. Slots, live dealers, blackjack, even some unique stuff I hadn’t tried before. Check it out here: <a href="https://www.deltaze.com.br/post/o-que-e-ncm?commentId=811cbd38-fbf3-4b49... What really stood out was the help desk. I had a tiny issue with a bonus not working, and they got back to me in like no time. Compare that to other sites where you’re just ghosted by support — yeah, hard pass.

Also, if you’re into bonuses (and who isn’t?), this place offers some legit ones. But here’s the trick: don’t just grab every shiny offer. It’s smarter to go for clear terms than a huge bonus you’ll never be able to withdraw. I’m not saying you should go and bet the farm — please don’t. But if you’ve got a little extra cash and you’re looking for a fun way to unwind, online casinos can totally deliver. Just stay sharp, control your bankroll, and don’t treat it like a side hustle. It’s for fun, not for a paycheck. Anyway, just wanted to drop my experience here in case anyone’s interested or trying to find a good place to play. If you’ve got your own stories or even some horror tales, I’m all ears — love talking shop about this stuff.

Good luck out there, and may the odds be ever in your favor ??

Anonymous

Timfrums (not verified)

on

Sat, 08/16/2025 - 00:59

Предлагаем качественную ветошь обтирочную в наличии на складе в Санкт-Петербурге. Хлопчатобумажная, трикотажная, цветная и белая — под любые задачи. Подходит для предприятий, автосервисов, производств и клининга. Цена — от 125 руб/кг, при заказе от 300 кг — скидки. Ветошь отобрана https://vetosh-optom.ru , без фурнитуры и загрязнений, готова к применению. Отгружаем от 10 кг, работаем с физ. и юр. лицами. Возможна доставка по СПб и Ленобласти. Оформить заказ можно через сайт или по телефону.

Anonymous

Crystalfuexy (not verified)

on

Sat, 08/16/2025 - 01:06

Понятно, спасибо за помощь в этом вопросе.
пользователю понадобится решить для себя, на чьей стороне он станет играть, примкнуть к соответствующему отряду и отправиться уничтожать врагов, [url=https://hardcs.ru/]скачать кс 1.6 бесплатно[/url] выполняя при этом главную цель.

Anonymous

Alfredmaw (not verified)

on

Sat, 08/16/2025 - 02:18

<a href=https://igrozavod.ru/>https://igrozavod.ru/</a> Скачать игры без торрента: Альтернативные пути к цифровым развлечениям В стремительно меняющемся мире цифровых развлечений, поиск надежных и безопасных способов скачивания игр становится все более актуальным. Торрент-трекеры, некогда популярные, уступают место более цивилизованным методам, предлагая пользователям не только удобство, но и защиту от потенциальных угроз. Отказ от торрентов открывает двери в мир легального и безопасного гейминга, где каждый может наслаждаться любимыми играми без риска для своей системы.

Anonymous

RonaldTop (not verified)

on

Sat, 08/16/2025 - 02:45

Ребята, хочу поделиться своей радостью! Наконец-то закрыл вопрос с подшипниками для своего небольшого производства. Заказывал оптом через одну компанию, нашел их здесь на форуме, в старой теме. Сначала были сомнения, все-таки большая партия, да и сумма немаленькая. Но рискнул и ни разу не пожалел!
Если ищете надежного поставщика подшипников оптом, не сомневайтесь, обращайтесь к ним. Я остался очень доволен и уверен, что буду сотрудничать с ними и дальше. Всем удачи и надежной техники! [url=https://www.caduser.ru/forum/topic53933.html]роликоподшипник.[/url]

Anonymous

JenniferJaf (not verified)

on

Sat, 08/16/2025 - 02:55

Какие нужные слова... супер, великолепная мысль
Букмекер 1вин ежедневно доказывает свою состоятельность, радует любителей казино новыми автоматами и слотами, [url=https://1win-gun.lol/]1win-gun.lol[/url] а беттеров - широкой линией азартных игр.

Anonymous

HenryGom (not verified)

on

Sat, 08/16/2025 - 03:10

when will cialis be generic <a href=" https://www.e-learningadda.com/user/teauzbnxhe/?um_action=edit ">cialis black review</a> or <a href=" http://www.netfaqs.com/windows/DUN/Inetwiz5/index.asp?bisp=tadalify.com ">when should i take cialis</a>
http://www.adhub.com/cgi-bin/webdata_pro.pl?_cgifunction=clickthru&url=h... tadalafil versus cialis
[url=http://delayu.ru/delayucnt/1/cnt?msgid=47204&to=https://tadalify.com]what does cialis treat[/url] cialis one a day and [url=https://pramias.com/profile/wheeylozvz/]where to buy cialis online[/url] tadalafil citrate

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.