Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

Tags: 
projects
filament splicer

43681 Comments

Anonymous

FranktuB (not verified)

on

Tue, 08/12/2025 - 18:21

<a href=https://t.me/brows_sevastopol_makeup>татуаж севастополь</a> Брови Симферополь – это профессиональный подход к созданию идеального образа, доступный каждой женщине. Коррекция бровей Севастополь – важный шаг к совершенству. Сделать брови в Севастополе – это легко и удобно!

Anonymous

JamesKag (not verified)

on

Tue, 08/12/2025 - 18:29

<a href=https://vk.com/trezvuchie_kurkino>школа музыки в куркино</a> Школа вокала Куркино – это место, где вы сможете не только научиться петь, но и обрести уверенность в себе, развить артистизм и найти новых друзей. Мы предлагаем различные вокальные программы для детей и взрослых, от классического вокала до современной поп-музыки.

Anonymous

RobertDub (not verified)

on

Tue, 08/12/2025 - 18:58

Спасибо за полезный материал. Приятно читать советы, которые помогают самостоятельно заботиться о доме без лишней сложности. Я сочетал рекомендации из этого поста с [url=https://rjadom.ru/]прямолинейными советами по ремонту[/url], которые нашёл раньше, и вместе они значительно упростили мою работу. Такие статьи ценны для всех, кто хочет улучшить свой домашний уют.

Anonymous

Michaelcof (not verified)

on

Tue, 08/12/2025 - 19:39

<a href=https://bleskmet.ru/>перила для лестниц из нержавеющей стали</a> Поручни – это общее название для элементов перил, предназначенных для поддержки и удобства передвижения по лестнице. Они могут быть различной формы и толщины, в зависимости от дизайна и предпочтений. }

Anonymous

Gillgaumn (not verified)

on

Tue, 08/12/2025 - 19:51

Вы не правы. Я уверен. Давайте обсудим это.
в каких городах можно отправиться в тур? Улицы центра - самые показательные, впечатляющие монастыри, [url=https://citytour24.ru/]Аренда автобуса[/url] что представляют его самобытность.

Anonymous

Gillgaumn (not verified)

on

Tue, 08/12/2025 - 22:33

Замечательно, это забавное сообщение
особенно востребованы автобусные туры в Питер, Москву, Казань, Кавказ, Золотое кольцо, Беларусь, Великий Устюг, выходного дня, Чебоксары, Йошкар-Олу, Ижевск, [url=https://citytour24.ru/]Аренда автобуса[/url] Уфу и Башкирии.

Anonymous

AnthonyNor (not verified)

on

Tue, 08/12/2025 - 22:37

Заказала букет маме - она сказала, что это самый нежный подарок в ее жизни!

Anonymous

Site - Mn (not verified)

on

Tue, 08/12/2025 - 22:44

Hey everyone,

I've been exploring the world of virtual casinos lately, and I’ve gotta say — it’s pretty damn addictive. At first, I was honestly suspicious. I mean, how do you even trust an online platform with your hard-earned money, right? But after spending hours researching (and trying out a few sketchy sites so you don’t have to), I figured out a few things that set apart a trustworthy casino from a risky mess. First off, if you’re new to all this, here’s the golden rule: **licenses matter**. If a casino doesn’t have a proper regulatory certificate (like from the MGA or the UKGC), just walk away. No bonus is worth the gamble of never seeing your money again. Also — and I know no one wants to — go through the small print. That’s the only way to know what kind of wagering requirements they’ve slapped onto those so-called “juicy” bonuses.

Now, let me share a site I’ve been playing on these last few weeks. It’s been a breath of fresh air. The interface? Super clean. Payouts? Quick — like 24 hours quick. And the game selection? *Wild*. Slots, live dealers, blackjack, even some unique stuff I hadn’t tried before. Check it out here: <a href="https://forum.slub-wesele.pl/viewtopic.php?p=796503#796503">plinko oszuЕ›ci</a> What really impressed me was the support team. I had a tiny issue with a bonus not working, and they got back to me in like instantly. Compare that to other sites where you’re just left hanging — yeah, no thanks.

Also, if you’re into bonuses (and who isn’t?), this place offers some legit ones. But here’s the trick: don’t just chase bonuses. It’s smarter to go for fair terms than a huge bonus you’ll never be able to withdraw. I’m not saying you should go and drop your rent money — please don’t. But if you’ve got a little extra spending money and you’re looking for a fun way to unwind, online casinos can totally deliver. Just stay sharp, know your limits, and don’t treat it like a side hustle. It’s for fun, not for a paycheck. Anyway, just wanted to drop my experience here in case anyone’s looking for solid info or trying to find a decent place to play. If you’ve got your own recommendations or even some wild losses, I’m all ears — love talking shop about this stuff.

Good luck out there, and don’t let the house win too much ??

Anonymous

AnthonyNor (not verified)

on

Tue, 08/12/2025 - 23:08

Спасибо за молниеносную доставку - цветы были свежими, будто только что срезаны!

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.