Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

Tags: 
projects
filament splicer

46749 Comments

Anonymous

RobertNex (not verified)

on

Wed, 08/06/2025 - 14:16

Передовые системы иммерсивного взаимодействия и AR активно проявляются в индустрию онлайн-казино. [url=https://td-colombo.ru/]7к[/url] реализует интеграцию указанных механик, обеспечивая высоко реалистичный эффект присутствия в действие. Будущее игровой сферы фундаментально зависит на этом.

Anonymous

StephenHit (not verified)

on

Wed, 08/06/2025 - 15:10

Переносные игры по-прежнему завоёвывать интерес. В рамках этих сдвигов особенно заметна роль [url=https://ryazanovskoe.ru/]джойказино[/url] — развлекательной системы, эффективно внедрившейся к новым трендам.
Дальнейшее развитие переносного развлечения обещает быть ещё ярче технологичным.

Anonymous

Carolineappek (not verified)

on

Wed, 08/06/2025 - 16:12

Извините, что я вмешиваюсь, но не могли бы Вы расписать немного подробнее.
все игра имеет отдельный раздел с правилами участия, [url=https://melbet-off1cial.xyz/]melbet[/url] которые требуется изучить перед ее началом. отличительной характеристикой бездепозитного бонуса melbet является нет необходимости вносить денежные средства денег либо готовить определенное количество ставок.

Anonymous

Michaelvop (not verified)

on

Wed, 08/06/2025 - 18:04

<a href=https://anastasia-rechanskaya.ru/kontent-marketing-i-pr/>Услуги маркетолога</a> услуги pr агентства: Профессиональное управление информацией и связями с общественностью Услуги PR агентства включают в себя управление информацией, организацию мероприятий и установление связей с общественностью.

Anonymous

Stacyviaxy (not verified)

on

Wed, 08/06/2025 - 19:28

Вот ведь создания какие,
Платформа подходит для пользователей из казахстана, [url=https://www.ruizyruizconsultores.cl/luchshie-igrovye-avtomaty-pinco-igra... предлагает мобильные дополнения и круглосуточную поддержку. среднее срок вывода - от 15 минут до три часов.

Anonymous

Sarahroand (not verified)

on

Wed, 08/06/2025 - 19:33

Я извиняюсь, но, по-моему, Вы допускаете ошибку. Давайте обсудим это.
3.5.2. Користувач підтверджує, що не зможе вживати всяких заходів, орієнтованих лише на заподіяння шкоди Оператору, операторам стільникового мобільного зв'язку, [url=https://favor.com.ua/ru/blogs/41025.html]https://favor.com.ua/ru/blogs/4... правовласникам або іншим особам.

Anonymous

Site - Mn (not verified)

on

Wed, 08/06/2025 - 20:13

Hey guys,

I've been exploring the world of internet gambling lately, and I’ve gotta say — it’s way more exciting than I expected. At first, I was a bit wary. I mean, how do you even trust an online platform with your cash, right? But after testing the waters (and trying out a few questionable sites so you can avoid that mess), I figured out a few things that distinguish a reliable casino from a risky mess. First off, if you’re new to all this, here’s the golden rule: **check the license**. If a casino doesn’t have a proper regulatory certificate (like from the MGA or the UKGC), just run. No bonus is worth the gamble of never seeing your funds again. Also — and I know no one wants to — go through the small print. That’s the only way to know what kind of wagering requirements they’ve slapped onto those so-called “juicy” bonuses.

Now, let me share a site I’ve been hooked on these last few weeks. It’s been a breath of fresh air. The interface? Super easy to navigate. Payouts? Quick — like 24 hours quick. And the game selection? *Wild*. Slots, live dealers, blackjack, even some oddball options I hadn’t tried before. Check it out here: <a href="https://tablo.com/genres/classics/discussions/12880">aviator betano</a> What really won me over was the help desk. I had a tiny issue with a bonus not working, and they got back to me in like no time. Compare that to other sites where you’re just left hanging — yeah, hard pass.

Also, if you’re into bonuses (and who isn’t?), this place offers some legit ones. But here’s the trick: don’t just chase bonuses. It’s smarter to get reasonable terms than a huge bonus you’ll never be able to withdraw. I’m not saying you should go and bet the farm — please don’t. But if you’ve got a little extra spending money and you’re looking for a bit of online excitement, online casinos can totally deliver. Just stay sharp, know your limits, and don’t treat it like a side hustle. It’s for fun, not for a paycheck. Anyway, just wanted to drop my experience here in case anyone’s interested or trying to find a decent place to play. If you’ve got your own stories or even some casino nightmares, I’m all ears — love talking shop about this stuff.

Good luck out there, and may the odds be ever in your favor ??

Anonymous

RichardElilk (not verified)

on

Wed, 08/06/2025 - 21:37

trusted pharmacy Zanaflex USA <a href=" https://www.news-adhoc.com/author/ijfoicpxyl/ ">Tizanidine tablets shipped to USA</a> or <a href=" https://toolbarqueries.google.cd/url?sa=t&url=https://relaxmedsusa.com ">trusted pharmacy Zanaflex USA</a>
https://maps.google.hn/url?sa=t&url=https://relaxmedsusa.com trusted pharmacy Zanaflex USA
[url=https://maps.google.com.uy/url?q=https://relaxmedsusa.com]relief from muscle spasms online[/url] trusted pharmacy Zanaflex USA and [url=http://www.bqmoli.com/bbs/home.php?mod=space&uid=365742]affordable Zanaflex online pharmacy[/url] trusted pharmacy Zanaflex USA

Anonymous

MeganFup (not verified)

on

Wed, 08/06/2025 - 21:43

Мне кажется, что это уже обсуждалось, воспользуйтесь поиском по форуму.
Процесс начисления не имеющим каких-либо нестандартных требований, [url=https://mostbet-official2.xyz/]mostbet-official2.xyz[/url] а перевод средств происходит автоматически за максимум двадцати четырех часов по окончании создания счета.

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.