Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

Tags: 
projects
filament splicer

43073 Comments

Anonymous

DavidOremn (not verified)

on

Fri, 08/01/2025 - 09:03

<a href=https://vk.com/kiteschoolhurghadaegypt>кайтинг</a> Кайт регат: Соревнования для настоящих профессионалов. Проверьте свои силы и поборитесь за звание лучшего кайтсёрфера.

Anonymous

EdithNig (not verified)

on

Fri, 08/01/2025 - 09:10

по словам Сергея Павлова, любой сертификат о высшем образовании - бланк строгой отчетных документов и даже если в институте его неправильно заполнили, существует специальная процедура уничтожения: составляют акт в него вклеивают вырезанный из диплома номер, [url=http://demobooking.geekhub.it/2025/07/28/kupit-diplom-kosmetologa-oficia... а затем сдают в профильную службу.

Anonymous

DanielDum (not verified)

on

Fri, 08/01/2025 - 09:21

[u][b]We're all speeding towards your rescue[/b][/u]—an squad among professionals which can fast fix this effects with one drainage disaster in our residence!
[u][b]My rapid response[/b][/u] - a core into cutting your expenses by every ensuing significant mends!
[url=https://5.gp/b31q6i3y][b]Experience their speed with quality among assistance right now![/b][/url]

Anonymous

BenDioky (not verified)

on

Fri, 08/01/2025 - 09:33

Я думаю, что Вы не правы. Я уверен. Давайте обсудим. Пишите мне в PM, пообщаемся.
генератор случайных чисел ориентируется преимущественно на параметры софта, [url=https://lab-sites.com/]как выиграть в pokerdom[/url] заложенные в него разработчиком. Лидеры индустрии - крупные студии, например netent, pragmatic play, betsoft, microgaming.

Anonymous

Annwhogs (not verified)

on

Fri, 08/01/2025 - 09:35

Прошу прощения, что я вмешиваюсь, но мне необходимо немного больше информации.
para pago en [url=https://kariorangpower.com/descubre-el-mundo-de-casino-online-sin-regist... no necesario dar bancario o personal datos. Sin embargo, se cobrara una tarifa de Servicio si la tarjeta o cuenta my paysafecard permanece inactiva durante mas de 12 meses, y una tarifa de conversion de moneda si el pago se realiza en dinero que no sea Euro.

Anonymous

DanielDum (not verified)

on

Fri, 08/01/2025 - 09:44

[u][b]We're hastening into our relief[/b][/u]—an squad with specialists who can quickly fix this consequences of some hydraulics crisis in thy home!
[u][b]Your fast reaction[/b][/u] - some solution towards lowering your fees with any later significant mends!
[url=https://5.gp/b31q6i3y][b]Experience one's pace alongside quality from support right now![/b][/url]

Anonymous

SamuelWairl (not verified)

on

Fri, 08/01/2025 - 10:10

order from mexican pharmacy online <a href=" https://myrsporta.ru/forums/users/joi15-2/ ">buy neurontin in mexico</a> or <a href=" http://www.supedapara.com/webmail/redir.php?http://mexicarerxhub.shop ">isotretinoin from mexico</a>
http://www.camping-channel.eu/surf.php3?id=2973&url=http://mexicarerxhub... buy cialis from mexico
[url=http://fishingkuban.ru/forum/away.php?s=http://mexicarerxhub.shop]rybelsus from mexican pharmacy[/url] legit mexico pharmacy shipping to USA and [url=http://www.lionsinfosys.com/user/pangodjszq/?um_action=edit]online mexico pharmacy USA[/url] sildenafil mexico online

Anonymous

Site - Mn (not verified)

on

Fri, 08/01/2025 - 10:19

Hey people,

I've been diving into the world of internet gambling lately, and I’ve gotta say — it’s a total blast. At first, I was totally unsure. I mean, how do you even trust an online platform with your cash, right? But after doing a ton of research (and trying out a few dodgy sites so you don’t have to), I figured out a few things that set apart a reliable casino from a complete fraud. First off, if you’re new to all this, here’s the golden rule: **check the license**. If a casino doesn’t have a proper regulatory certificate (like from the MGA or the UK Gambling Commission), just walk away. No bonus is worth the gamble of never seeing your funds again. Also — and I know no one wants to — read the T&Cs. That’s the only way to know what kind of wagering requirements they’ve slapped onto those so-called “juicy” bonuses.

Now, let me share a site I’ve been hooked on these last few weeks. It’s been a total win. The interface? Super clean. Payouts? No waiting around. And the game selection? *Massive*. Slots, live dealers, blackjack, even some weird niche games I hadn’t tried before. Check it out here: <a href="https://forum.luszczyce.pl/reklama/hra-t5235.html">plinko</a> What really impressed me was the customer service. I had a tiny issue with a bonus not working, and they got back to me in like 10 minutes. Compare that to other sites where you’re just ghosted by support — yeah, hard pass.

Also, if you’re into bonuses (and who isn’t?), this place offers some legit ones. But here’s the trick: don’t just go crazy over promos. It’s smarter to get clear terms than a huge bonus you’ll never be able to withdraw. I’m not saying you should go and blow your whole paycheck — please don’t. But if you’ve got a little extra cash and you’re looking for a bit of online excitement, online casinos can totally deliver. Just play smart, set a budget, and don’t treat it like a side hustle. It’s for fun, not for a paycheck. Anyway, just wanted to drop my experience here in case anyone’s curious or trying to find a good place to play. If you’ve got your own go-to sites or even some wild losses, I’m all ears — love talking shop about this stuff.

Good luck out there, and don’t let the house win too much ??

Anonymous

JonClogy (not verified)

on

Fri, 08/01/2025 - 13:47

Понятно, спасибо за объяснение.
если кому-то удастся поместить бомбу замедленного действия в исходное место диска, поэтому на экране отобразится время, за которое бодибилдер должны достичь вертолета, [url=https://theevidencebasedtherapist.com/2021/04/episode-3/]https://theevid... чтобы сделать побег.

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.