Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

Tags: 
projects
filament splicer

41215 Comments

Anonymous

Site - Mn (not verified)

on

Thu, 07/31/2025 - 17:53

Hey guys,

I've been checking out the world of online gaming lately, and I’ve gotta say — it’s pretty damn addictive. At first, I was totally unsure. I mean, how do you even rely on an online platform with your money, right? But after doing a ton of research (and trying out a few dodgy sites so you can avoid that mess), I figured out a few things that set apart a trustworthy casino from a complete fraud. First off, if you’re new to all this, here’s the golden rule: **check the license**. If a casino doesn’t have a proper license (like from the MGA or the UK Gambling Commission), just run. No bonus is worth the trouble of never seeing your money again. Also — and I know no one wants to — check the terms. That’s the only way to know what kind of wagering requirements they’ve slapped onto those so-called “juicy” bonuses.

Now, let me share a site I’ve been using these last few weeks. It’s been a game-changer. The interface? Super easy to navigate. Payouts? No waiting around. And the game selection? *Wild*. Slots, live dealers, blackjack, even some weird niche games I hadn’t tried before. Check it out here: <a href="https://thesn.eu/blogs/56852/Game">plinko game download</a> What really stood out was the customer service. I had a tiny issue with a bonus not working, and they got back to me in like no time. Compare that to other sites where you’re just shouting into the void — yeah, hard pass.

Also, if you’re into bonuses (and who isn’t?), this place offers some awesome ones. But here’s the trick: don’t just go crazy over promos. It’s smarter to go for clear terms than a huge bonus you’ll never be able to withdraw. I’m not saying you should go and blow your whole paycheck — please don’t. But if you’ve got a little extra cash and you’re looking for a bit of online excitement, online casinos can totally deliver. Just stay sharp, set a budget, and don’t treat it like a side hustle. It’s for fun, not for a paycheck. Anyway, just wanted to drop my experience here in case anyone’s curious or trying to find a trustworthy place to play. If you’ve got your own stories or even some wild losses, I’m all ears — love talking shop about this stuff.

Good luck out there, and don’t let the house win too much ??

Anonymous

Anthonyped (not verified)

on

Thu, 07/31/2025 - 19:36

https://easy-stick.com/ https://easy-stick.com/ https://easy-stick.com/
https://easy-stick.com/ https://easy-stick.com/ https://easy-stick.com/
https://easy-stick.com/ https://easy-stick.com/ https://easy-stick.com/
https://easy-stick.com/ https://easy-stick.com/ https://easy-stick.com/
https://easy-stick.com/ https://easy-stick.com/ https://easy-stick.com/
https://easy-stick.com/ https://easy-stick.com/ https://easy-stick.com/

Anonymous

LhanekeW (not verified)

on

Thu, 07/31/2025 - 19:38

Hey I know this is off topic but I was wondering if you knew of any widgets I could add to my blog that automatically tweet my newest twitter updates. I've been looking for a plug-in like this for quite some time and was hoping maybe you would have some experience with something like this. Please let me know if you run into anything. I truly enjoy reading your blog and I look forward to your new updates.
http://leasing.com.ua/metalevyj-proty-plastykovoho-kriplennya-dlya.html

Anonymous

Frankiminc (not verified)

on

Thu, 07/31/2025 - 20:13

Современные зажигалки Zippo изготовляются из латуни, а некоторые модели делаются из меди [url=https://www.zippo.ru/]официальный сайт[/url]

Anonymous

Chrissig (not verified)

on

Thu, 07/31/2025 - 20:16

разумеется, процесс займет больше физических трудов и времени. Лучше условия для работы и класc зарплат на строительных площадках крупных городов, таких как, например, [url=https://musascollection.com/2025/07/30/maksimum-vozmozhnostej-vash-put-k... Мюнхен или Франкфурт-на-Майне.работодатели выбирают специалистам с опытом процедуры и знанием немецкого языка на высоте b1.

Anonymous

Joshuakam (not verified)

on

Thu, 07/31/2025 - 20:19

Since India’s independence from Britain in 1947, the status of English in India has been deeply political – entwined with questions of identity, power, and national direction.

Today, English is one of several official languages in India, spoken by about 10% of the population. Hindi is the first language for around 44% of citizens, according to the 2011 census.
[url=https://trip-scan.biz]tripskan [/url]
But in recent years, Modi’s BJP has placed particular emphasis on promoting Hindi and reducing the use of English in public life.

The prime minister almost never delivers speeches in English, preferring Hindi for national addresses such as his monthly radio program. His administration has encouraged officials to use Hindi on social media and in government correspondence – though, after criticism from non-Hindi-speaking states, clarified that this was intended mainly for the Hindi belt in the north.
https://trip-scan.biz
трип скан
When India hosted world leaders for the 2023 G20 summit in New Delhi, invitations were sent out from “Bharat” – the Sanskrit or Hindi name for the country – instead of “India,” fueling speculation that the government aims to ultimately phase out the country’s English designation altogether.

Modi’s critics have been quick to note his political motives behind these moves.

With its roots in the Rashtriya Swayamsevak Sangh (RSS), a right-wing organization that advocates Hindu hegemony within India, the BJP’s language policies resonate with many in a country where nearly 80% of people are Hindu.

Analysts say the BJP is seeking to capitalize on this demographic by promoting language policies that strengthen its support base in the north.

According to Rita Kothari, an English professor from Ashoka University, the government “is certainly interested in homogenizing the country and making Hindi more widespread.”

But that policy can also backfire – in part because many regions, such as Marathi-speaking Maharashtra in the west – are staunchly proud of their local language.

The violent clashes in the state’s megacity Mumbai earlier this month were sparked by the regional government’s controversial decision to make Hindi a compulsory third language in public primary schools.

Pushback and protest has also been especially strong in the south, where English and regional languages such as Tamil, Telugu, and Kannada are valued as symbols of local identity and autonomy.

Anonymous

Frankiminc (not verified)

on

Thu, 07/31/2025 - 20:19

Современные зажигалки Zippo изготовляются из латуни, а некоторые модели делаются из меди [url=https://www.zippo.ru/]официальный сайт[/url]

Anonymous

Eddiesal (not verified)

on

Thu, 07/31/2025 - 20:27

When Hussain AlMoosawi arrived home, he didn’t recognize anything.

The Emirati photographer, who had spent eight years studying in Australia, returned to the United Arab Emirates (UAE) in 2013. He’d missed a real estate boom of dizzying proportions: not just new buildings, but new districts.
[url=https://tripscan36.org]трипскан сайт[/url]
More than that, the buildings of his childhood were disappearing, replaced by shiny new skyscrapers.

But for AlMoosawi, these international icons were not the urban fabric of his home: it was the oft-overlooked, mid-century office towers and residential blocks squeezed between new highways and overshadowed by luxury developments that felt most familiar.

It sparked a desire to “understand the urban context of the UAE,” and AlMoosawi set out to meticulously document and capture these underappreciated buildings, “and reimagine the city as if it were the ‘80s, the time when I was born.”
https://tripscan36.org
трипскан
Initially focusing on industrial landscapes, temporary structures and air conditioning units, he began to notice symmetry in many of the buildings he was photographing, inspiring his current project: facades.

“Facades are like a face,” said AlMoosawi. “It’s something that people connect with.”

His bold, geometric images strip away context to spotlight the character and diversity of everyday buildings. Using a telephoto lens to shoot close-ups from the ground or elevated positions, AlMoosawi carefully frames out distractions and sometimes removes minor obstructions like lampposts in post-processing.

So far, the 41-year-old, who is editor-in-chief for National Geographic AlArabiya Magazine, has photographed over 600 building?s across the UAE, and next year hopes to complete his collection in Abu Dhabi, where he lives.

In the long term, he hopes to turn the “lifetime project” into an interactive archive that both preserves urban heritage and invites viewers to rediscover their own city.

“Our cities aren’t big, in terms of scale, compared to many other cities,” said AlMoosawi. “But then they have a story to tell, they have things between the lines that we don’t see, and my quest is to see these things.”

Anonymous

MichelleBet (not verified)

on

Thu, 07/31/2025 - 21:17

Этого не может быть!
A small shop on the Rue de Castillon, decorated in elegant purple tones, offers buyers... They say, with respected titled customers he can be rude and expresses everything that he thinks about their clothes and jewelry, often refuses to sell jewelry if The [url=https://ladyguru.ru/10-potryasayushhih-yuvelirnyh-podarkov-dlya-zhenshhi...кольцо с надписью на заказ[/url] believes that the customer people do not fit face .

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.