Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

Tags: 
projects
filament splicer

41681 Comments

Anonymous

Kennethpycle (not verified)

on

Thu, 07/31/2025 - 10:32

<a href=https://kiteschoolhurghada.ru>кайтсёрфинг</a> Кайтсёрфинг – это постоянный процесс обучения и совершенствования. Не останавливайтесь на достигнутом, учите новые трюки и делитесь опытом с другими.

Anonymous

Albertnup (not verified)

on

Thu, 07/31/2025 - 11:03

Just when we thought the Coldplay Jumbotron controversy had run its course, Gwyneth Paltrow has entered the chat.

The Academy Award-winning actress and Goop founder appeared in a new – and very funny – ad for Astronomer, the tech firm whose former CEO and human resources chief launched a million memes after being shown on a Jumbotron at a Coldplay concert last week.
[url=https://trip36.win]tripscan[/url]
“I’ve been hired on a very temporary basis to speak on behalf of the 300-plus employees at Astronomer,” Paltrow said in the clip shared on the company’s Instagram on Friday night, adding that Astronomer had received “a lot of questions over the last few days.”

In addition to her other hats, Paltrow, of course, is also the famously “consciously uncoupled” ex-wife of Coldplay frontman Chris Martin, who at a concert in Boston last week inadvertently revealed an intimate moment between two top executives at Astronomer – who were seen embracing but immediately ducked from view – during a performance of Coldplay’s “Jumbotron Song.”
https://trip36.win
tripscan личный кабинет
“Whoa, look at these two,” Martin quipped at the time. “Either they’re having an affair or they’re just very shy.”

The moment caused a major internet sensation and an immediate spotlight on Astronomer. Both executives shown in the video have since resigned.

In the clip featuring Paltrow on Friday, the “questions” she addresses do not deal with the controversy, but rather the tech-focused business dealings of New York-based firm Astronomer.

The clip’s caption read simply, “Thank you for your interest in Astronomer.”

Anonymous

Kerireari (not verified)

on

Thu, 07/31/2025 - 11:40

Так бывает. Можем пообщаться на эту тему. Здесь или в PM.
{wide|huge} {selection|assortment} {models|options} {withdrawals|withdrawals} {funds|finances|amounts|winnings} betwinner guarantees users the flexibility to {register|receive} {log in|visit|access} their winnings {in the most|most convenient|comfortable way for {gadgets|them} {in the way|way}, #file_links["C:\Users\Admin\Desktop\file\gsa+en+86c4kqpy34P2URLBB.txt",1,N] ensures uninterrupted and satisfactory operation.

Anonymous

WarrenBadly (not verified)

on

Thu, 07/31/2025 - 12:04

Для детоксикации используются современные препараты и методы введения, позволяющие быстро нейтрализовать токсическое воздействие:
Подробнее можно узнать тут - [url=https://lechenie-narkomanii-mariupol13.ru/]lechenie narkomanii mariupol'[/url]

Anonymous

Larryamisy (not verified)

on

Thu, 07/31/2025 - 14:01

Découvrez <a href=https://pocketoption-france.fr/>pocket options</a>, l’application de trading intuitive utilisée par des millions de traders dans le monde. Accédez à plus de 100 actifs : forex, actions, crypto-monnaies et matières premières. Exécutions rapides, interface claire et retraits instantanés. Parfait pour débutants comme pour traders expérimentés - tradez où que vous soyez, à tout moment.

Anonymous

Miapix (not verified)

on

Thu, 07/31/2025 - 16:05

Весьма ценная информация
Limited communication with people always affects motivation, morale mood and well-being. as a result, it is expected and this in future a hybrid work model combining home-based vacancy and office [url=http://korenagakazuo.com/2008/03/10/%e6%b0%b4%e3%81%8c%e5%a4%a7%e4%ba%8b..., will become more common, which indicates everything that wfh, most likely, will remain a flexible work option.

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.