Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

Tags: 
projects
filament splicer

41646 Comments

Anonymous

AbigayleHoM (not verified)

on

Mon, 07/28/2025 - 20:34

Я считаю, что Вы ошибаетесь. Могу отстоять свою позицию. Пишите мне в PM, пообщаемся.
Если прокси-серверы стоят дешево, они, по-видимому, будут медленными, нестабильными и небезопасными, [url=http://alexdesings.es/2025/07/28/kupit-bystrye-proksi/]http://alexdesing... что может спровоцировать значимым неприятностям при использовании в интернете.

Anonymous

Chloenub (not verified)

on

Mon, 07/28/2025 - 21:29

Весьма ценная мысль
чтобы играть [url=https://lakkras.ru/]leon casino[/url] в казино Леон? 2. «Играть». Запускает платный режим симуляторов. Эта мобильная вариант не требует загрузки стороннего софта.

Anonymous

Ramontunse (not verified)

on

Mon, 07/28/2025 - 21:35

<a href=https://vk.com/kiteschoolhurghadaegypt>кайтинг</a> Кайт школа: ваш путь к мастерству. Профессиональные инструкторы, безопасное обучение и индивидуальный подход. Станьте уверенным кайтсёрфером!

Anonymous

DouglasZet (not verified)

on

Mon, 07/28/2025 - 22:12

how much is amoxicillin prescription <a href=" https://ivpi.in/profile/sycbiupuup/ ">amoxicillin price without insurance</a> or <a href=" http://www.burstek.com/RedirectPage.php?reason=4&value=Anonymizers&proct... ">amoxicillin 500mg capsules price</a>
https://toolbarqueries.google.co.vi/url?q=http://clearmedsdirect.com amoxicillin 500 mg where to buy
[url=http://vm-01.magneticgrid.com/info.php?a[]=<a+href=http://clearmedsdirec... 1000 mg capsule[/url] how to get amoxicillin and [url=http://www.sportchap.ru/user/uybwhaqzqx/]price for amoxicillin 875 mg[/url] amoxicillin 500 capsule

Anonymous

Keithdroro (not verified)

on

Mon, 07/28/2025 - 23:10

It all started back in March, when dozens of surfers at beaches outside Gulf St Vincent, about an hour south of state capital Adelaide, reported experiencing a sore throat, dry cough and blurred vision after emerging from the sea.
[url=https://trip-scan.org]tripscan войти[/url]
Shortly after, a mysterious yellow foam appeared in the surf. Then, dead marine animals started washing up.

Scientists at the University of Technology Sydney soon confirmed the culprit: a buildup of a tiny planktonic algae called Karenia mikimotoi. And it was spreading.
https://trip-scan.org
tripscan войти
In early May, the government of Kangaroo Island, a popular eco-tourism destination, said the algal bloom had reached its coastline. A storm at the end of May pushed the algae down the coast into the Coorong lagoon. By July, it had reached the beaches of Adelaide.

Diverse algae are essential to healthy marine ecosystems, converting carbon dioxide into oxygen and benefiting organisms all the way up the food chain, from sea sponges and crabs to whales.

But too much of one specific type of algae can be toxic, causing a harmful algal bloom, also sometimes known as a red tide.

While Karenia mikimotoi does not cause long-term harm to humans, it can damage the gills of fish and shellfish, preventing them from breathing. Algal blooms can also cause discoloration in the water and block sunlight from coming in, harming ecosystems.

The Great Southern Reef is a haven for “really unique” biodiversity, said Bennett, a researcher at the University of Tasmania, who coined the name for the interconnected reef system which spans Australia’s south coast.

About 70% of the species that live there are endemic to the area, he said, meaning they are found nowhere else in the world.

“For these species, once they’re gone, they’re gone.”

Anonymous

Anthonyunduh (not verified)

on

Tue, 07/29/2025 - 00:26

What struck Scott Bennett most were the razor clams.

The long saltwater clams, resembling old-fashioned razors, normally burrow into sand to avoid predators. But when Bennett, an ecologist, visited South Australia’s Great Southern Reef last month, he saw thousands of them rotting on the sea floor.
[url=tripskan]https://trip-scan.info[/url]
“100% of them were dead and wasting away on the bottom,” Bennett told CNN.

Since March, a harmful algal bloom, fueled by a marine heat wave, has been choking South Australia’s coastline, turning once-colorful ecosystems filled with thriving marine life into underwater graveyards.

The bloom has killed about 15,000 animals from over 450 species, according to observations on the citizen science site iNaturalist. They include longfinned worm eels, surf crabs, warty prowfish, leafy seadragons, hairy mussels and common bottlenose dolphins.
tripscan top
https://trip-scan.info
The algae have poisoned more than 4,500 square kilometers (1,737 square miles) of the state’s waters – an area larger than Rhode Island – littering beaches with carcasses and ravaging an area known for its diversity.

It’s “one of the worst marine disasters in living memory,” according to a report by the Biodiversity Council, an independent expert group founded by 11 Australian universities.

The toxic algal bloom has devastated South Australia’s fishing industry and repelled beachgoers, serving as a stark warning of what happens when climate change goes unchecked.

Once a bloom begins, there is no way of stopping it.

“This shouldn’t be treated as an isolated event,” Bennett said. “This is symptomatic of climate driven impacts that we’re seeing across Australia due to climate change.”

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.