Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

Tags: 
projects
filament splicer

43387 Comments

Anonymous

AndrewFralk (not verified)

on

Mon, 07/28/2025 - 14:34

В современную эпоху разбираем о векторах развития контролируемого досуга. Растущее число игровых сайтов используют методы для регулирования тайминга и пределов. Даже [url=https://digital-report.ru/kak-v-kazino-pokerdom-igrat-na-kompjuterah-i-t... адаптирует системы, дающие возможность геймерам контролировать процесс и удерживать контроль. Как вы считаете о подобном развитии? Делитесь отзывы на форуме!

Anonymous

Gordontig (not verified)

on

Mon, 07/28/2025 - 14:51

Геймификация выступает важным направлением в индустрии ставок. Игровые платформы используют челленджи, уровневые механики и призы, в целях улучшить игру захватывающим. Стоит отметить, что [url=https://katok-fetisov.ru/kontakty]онлайн казино[/url] адаптирует аналогичные решения, обеспечивая клиентов дополнительные эмоции. Что скажете про такие элементы в онлайн-казино? Напишите свое мнение!

Anonymous

HeatherCurne (not verified)

on

Mon, 07/28/2025 - 14:52

По моему мнению Вы ошибаетесь. Пишите мне в PM.
для быстрого разбирательства вопросы нужно прикрепить к письму скрины, [url=https://swap-nfc.be/portfolio/growth-strategies/]https://swap-nfc.be/por... демонстрирующие ошибку. профессионалы оперативно проанализируют свое положение и посоветуют устранение трудностей.

Anonymous

RichardEmura (not verified)

on

Mon, 07/28/2025 - 15:18

Ищете bs2best at ссылка ? Зайдите на оригинальный сайт и прочитайте лучшие подборки статей по саморазвитию, технологиям и образу жизни.
<a href=https://1-bc2best.at>bs2best at ссылка</a>

Anonymous

RichardGraig (not verified)

on

Mon, 07/28/2025 - 15:59

It all started back in March, when dozens of surfers at beaches outside Gulf St Vincent, about an hour south of state capital Adelaide, reported experiencing a sore throat, dry cough and blurred vision after emerging from the sea.
[url=https://trip-scan.org]tripscan войти[/url]
Shortly after, a mysterious yellow foam appeared in the surf. Then, dead marine animals started washing up.

Scientists at the University of Technology Sydney soon confirmed the culprit: a buildup of a tiny planktonic algae called Karenia mikimotoi. And it was spreading.
https://trip-scan.org
трипскан сайт
In early May, the government of Kangaroo Island, a popular eco-tourism destination, said the algal bloom had reached its coastline. A storm at the end of May pushed the algae down the coast into the Coorong lagoon. By July, it had reached the beaches of Adelaide.

Diverse algae are essential to healthy marine ecosystems, converting carbon dioxide into oxygen and benefiting organisms all the way up the food chain, from sea sponges and crabs to whales.

But too much of one specific type of algae can be toxic, causing a harmful algal bloom, also sometimes known as a red tide.

While Karenia mikimotoi does not cause long-term harm to humans, it can damage the gills of fish and shellfish, preventing them from breathing. Algal blooms can also cause discoloration in the water and block sunlight from coming in, harming ecosystems.

The Great Southern Reef is a haven for “really unique” biodiversity, said Bennett, a researcher at the University of Tasmania, who coined the name for the interconnected reef system which spans Australia’s south coast.

About 70% of the species that live there are endemic to the area, he said, meaning they are found nowhere else in the world.

“For these species, once they’re gone, they’re gone.”

Anonymous

Ramontunse (not verified)

on

Mon, 07/28/2025 - 16:00

<a href=https://yandex.ru/profile/177183726173>кайтинг</a> Безопасность – это ключевой аспект кайтсёрфинга. Всегда проверяйте оборудование, следите за прогнозом погоды и не рискуйте в сложных условиях.

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.