Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

Tags: 
projects
filament splicer

41636 Comments

Anonymous

Adrianicort (not verified)

on

Sun, 07/27/2025 - 11:35

While manufacturers continue to tweak their products to overcome the stigma of ultraprocessed foods, nutritionists suggest consumers move forward in choosing products that help the planet — as long as they keep reading the nutrition label.

“I would look for something with a good fat composition in which saturated fat is less than a third of the total fat,” Willett said. “Some vegetable burgers made from peas and legumes can be quite starchy, which the body breaks down similarly to sugar, so I would prefer to see alternatives with more healthy fat, more nuts, more soy.”
[url=https://tripskan.org]трип скан[/url]
While the Dietary Guidelines for Americans call for a limit of 2,300 milligrams of sodium per day for adults, “the American Heart Association recommends a limit of 1,500 milligrams for adults over 50, which is the standard I prefer,” Willett said.

“Look for about 1 milligram of sodium per calorie, which is a pretty good criteria,” he added. “In general, salt and saturated fat are the two really important factors — along with something that’s flavorful or delicious, which is, of course, up to the consumer.”
https://tripskan.org
tripscan
One more key point from Willett: Before plant-based meats can truly help save the planet, they need to come down in price.

“These products are quite a bit more expensive, from what I’ve seen, than basic hamburger,” he said, “and we really need products that are price competitive with the beef and pork if we’re going to see them used on a daily basis, not just by people who can afford it.”

Anonymous

Shannonwar (not verified)

on

Sun, 07/27/2025 - 11:42

Говорите прямо.
^ "Авито" выделяется из olx group и станет самостоятельной российской [url=https://tribungroup.net/berita-hari-ini/avtomobilnyj-blog-vse-o-luchshih... компанией (рус.). ^ Годовая выручка основного юрлица avito по РСБУ превысила 100 млрд рублей (неопр.).

Anonymous

JamesPraib (not verified)

on

Sun, 07/27/2025 - 11:59

<a href=https://deepweb.net/blog/newest/bazaar-marketplace-laser-show>Tor Network</a> Bazaar Drugs Marketplace: A New Darknet Platform with Dual Access Bazaar Drugs Marketplace is a new darknet marketplace rapidly gaining popularity among users interested in purchasing pharmaceuticals. Trading is conducted via the Tor Network, ensuring a high level of privacy and data protection. However, what sets this platform apart is its dual access: it is available both through an onion domain and a standard clearnet website, making it more convenient and visible compared to competitors. The marketplace offers a wide range of pharmaceuticals, including amphetamines, ketamine, cannabis, as well as prescription drugs such as alprazolam and diazepam. This variety appeals to both beginners and experienced buyers. All transactions on the platform are carried out using cryptocurrency payments, ensuring anonymity and security. In summary, Bazaar represents a modern darknet marketplace that combines convenience, a broad product selection, and a high level of privacy, making it a notable player in the darknet economy.

Anonymous

Louisefousa (not verified)

on

Sun, 07/27/2025 - 12:27

игровой портал 7k предлагает богатый выбор шансов для поклонников азартных игр и ставок [url=https://chilaud.com/2022/01/27/bonjour-tout-le-monde/]https://chilaud.co... на настоящие суммы. Тренировочный режим подойдет для их тестирования без риска потери своих средств.

Anonymous

AndrewBuh (not verified)

on

Sun, 07/27/2025 - 12:57

<a href=https://safrole.com/>methylamine</a> Ephedrine is often used to produce phenylacetone, a key intermediate in stimulant synthesis. From phenylacetone, substances like methylone, mephedrone (4-MMC), and 3-CMC can be made using methylamine. Phenylnitropropene, derived from nitroethane, is another precursor. A-PVP and 4-methylpropiophenone are also widely used in synthetic drug production. BMK glycidate is commonly used to synthesize controlled substances.

Anonymous

Henryjeabs (not verified)

on

Sun, 07/27/2025 - 13:51

<a href=https://bbgate.com/>nitroethane</a> Ephedrine is often used to produce phenylacetone, a key intermediate in stimulant synthesis. From phenylacetone, substances like methylone, mephedrone (4-MMC), and 3-CMC can be made using methylamine. Phenylnitropropene, derived from nitroethane, is another precursor. A-PVP and 4-methylpropiophenone are also widely used in synthetic drug production. BMK glycidate is commonly used to synthesize controlled substances

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.