Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

Tags: 
projects
filament splicer

38486 Comments

Anonymous

Nathandiota (not verified)

on

Fri, 07/11/2025 - 19:50

High costs are still a big barrier to prospective customers, said Alan Gibson, principal at Maine-based builder GO Logic, where a shell for an ultra-efficient, two-story, 1,400 square foot home with three bedrooms can cost around $600,000.
[url=https://trip-scan.top]трипскан сайт[/url]
Homeowners also need to factor in additional costs, like buying and developing a suitable plot of land, and in some cases, getting access to water, electricity and septic, Gibson added.
https://trip-scan.top
трип скан
The way to bring down costs, Gibson believes, is more panelized, multi-family housing.

“It can be done so much more efficiently,” Gibson said, “and there’s a lot more repetition” for the developer, making the process faster and less expensive than custom multi-family builds.
Goodson, the homeowner in Maine, was able to save big money with his engineering background and penchant for DIY. He installed a rooftop solar system and electrical improvements himself, saving hundreds of thousands of dollars in the process. He wound up spending around $500,000 in all, which he estimates was $200,000 less than he otherwise would have.
“It’s a big number to swallow, I’m not making light of that at all, but it’s not that far out of what’s reasonable,” Goodson told CNN. It’s also not considering the long-term savings he will experience with no utility bills.

He was also able to take advantage of federal tax credits that reduced the cost of his rooftop solar, which saved him more than $10,000 on his panels. Those tax credits are now endangered with House Republicans’ tax bill.

“That was huge,” he said. “It’s fairly unfortunate they’re looking at doing away with it.”

Anonymous

JustinBuP (not verified)

on

Fri, 07/11/2025 - 20:53

Позволю себе не согласится с вами
но весьма важно считать romi (возврат маркетинговых вложений и roi (возврат инвестиций): сколько прибыли приносит каждый вложенный в рекламу рубль и, разумеется, сколько денег приносит каждый рубль потраченный на бизнес, [url=https://www.attendtug.com/2019/05/09/hello-world/]https://www.attendtug.... в целом.

Anonymous

DaviduNcew (not verified)

on

Fri, 07/11/2025 - 20:54

Ищете незабываемый тур на Камчатку? Организуем увлекательные путешествия по самым живописным уголкам полуострова [url=https://tur-na-kamchatku-2025.ru/]туры на камчатку летом[/url]

Anonymous

Danieledupe (not verified)

on

Fri, 07/11/2025 - 21:41

Тема интересна, приму участие в обсуждении. Вместе мы сможем прийти к правильному ответу.
имеет приемлемую быстродействие действия и [url=https://xn--80abjd7amah7l.xn--p1acf/azino-777-virtualnyj-mir-azartnyh-ig... неудовлетворительный уровень защиты. Еженедельный кэшбэк. Администрация azino777 возвращает игрокам каждый четверг до десяти% % % процентов % от поставленного проигранных денежных средств.

Anonymous

Nataliaheemi (not verified)

on

Fri, 07/11/2025 - 22:55

По моему мнению Вы не правы. Предлагаю это обсудить. Пишите мне в PM, пообщаемся.
we are exceptionally impressed by the constant promo offers of the casino, including their strengths unimaginable amount bonus spins in newest fun, and in addition – many bonuses for replenishment accounts, incentives for loyalty, [url=https://duhocvungtau.com.vn/dai-hoc-coventry-du-hoc-anh/]https://duhocvu..., and VIP privileges.

Anonymous

DaviduNcew (not verified)

on

Fri, 07/11/2025 - 22:58

Ищете незабываемый тур на Камчатку? Организуем увлекательные путешествия по самым живописным уголкам полуострова [url=https://tur-na-kamchatku-2025.ru/]тур на камчатку с детьми[/url]

Anonymous

DaviduNcew (not verified)

on

Fri, 07/11/2025 - 23:03

Ищете незабываемый тур на Камчатку? Организуем увлекательные путешествия по самым живописным уголкам полуострова [url=https://tur-na-kamchatku-2025.ru/]рыбалка на камчатке туры[/url]

Anonymous

KristinLiday (not verified)

on

Fri, 07/11/2025 - 23:39

Эта отличная идея придется как раз кстати
??????? ???????? {??????|????????|????????} ???????? #file_links["C:\Users\Admin\Desktop\file\gsa+hy+PhoenixPBN128T2k10k782P2URLBB.txt",1,N] ????? ?{?????????/ ?????????} ? {?????|??????????} {????????|??????????|????????}: {?????? ??? ???????????|?????? ??? ???????????, ?? ?????? ? {????????|????????? ????????|???????????} {??????|????????} {???????|???????} {??????|????|?????????????|????|???????} {????|????|????|????} ?????????? ?, ?????? ? ?????????? ??????? {?????|????????} {???????|???????} ? {????????|????????} {?????????|???????????} ????????.

Anonymous

DaviduNcew (not verified)

on

Fri, 07/11/2025 - 23:45

Ищете незабываемый тур на Камчатку? Организуем увлекательные путешествия по самым живописным уголкам полуострова [url=https://tur-na-kamchatku-2025.ru/]авторские туры на камчатку[/url]

Anonymous

MiaJex (not verified)

on

Sat, 07/12/2025 - 00:19

at {this|presented|this|this} moment, I notice the page "Selfie Request", "#file_links["C:\Users\Admin\Desktop\file\gsa+en+seomaster10k20k50k30725P2URLBB.txt",1,N]", where I can ask to take a picture of Jen in {this or that|any|any} {position|pose|variant|interpretation|variation}, {in which|wherever I want.

Anonymous

DanielDum (not verified)

on

Sat, 07/12/2025 - 01:06

[u][b]We're rushing for their rescue[/b][/u]—an group among masters whose shall fast correct this results of the plumbing crisis at our dwelling!
[u][b]Their quick reply[/b][/u] - this secret towards reducing our fees in certain later extensive repairs!
[url=https://5.gp/b31q6i3y][b]Feel one's pace together standard of support right now![/b][/url]

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.