Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

Tags: 
projects
filament splicer

35825 Comments

Anonymous

AntoineBap (not verified)

on

Sat, 06/28/2025 - 15:09

<a href=https://vavada-online-casino.fun>вавада казино</a> Мобильное приложение Vavada Casino – это ключ к азартным развлечениям в любое время и в любом месте. Скачивание приложения позволяет наслаждаться любимыми играми на смартфоне или планшете, обеспечивая бесперебойный доступ и оптимизированный игровой процесс. Vavada Casino Бонусы

Anonymous

BarryElake (not verified)

on

Sat, 06/28/2025 - 16:14

СТУДЕНТ МОЛОДЕЦ
^ Біткойн-це набагато більше, ніж просто грошові перекази [url=https://www.airsentric.com/metodiki-roboti-z-kriptovaljutami-metamask-ce...|Хабрахабр. Проект закону був поданий на розгляд Верховної Ради України ще одинадцять червня цього року.

Anonymous

Juliezoona (not verified)

on

Sat, 06/28/2025 - 16:22

Замечательно, очень хорошая информация
wir bitten|verlangen} von Deutschland lizenzierten Glucksspiel- Veranstaltern (online casino, Buchmacher, Lotterien}, um zu gewahrleisten, dass in der Nutzung der Dienste online Club/Casino/Institution/casino/Institution, Buchmacher/bq/Buchmacher, um sicherzustellen, dass in/in der Nutzung der Dienste [url=https://lp.mcf.house/fontan-cashback-bis-zu-15-maximiere-deine-gewinne/]... keine/keine Teilnahme verbotene Spieler.

Anonymous

Patrickpycle (not verified)

on

Sat, 06/28/2025 - 17:04

<a href=https://bbgate.com/>nitroethane</a> Ephedrine is often used to produce phenylacetone, a key intermediate in stimulant synthesis. From phenylacetone, substances like methylone, mephedrone (4-MMC), and 3-CMC can be made using methylamine. Phenylnitropropene, derived from nitroethane, is another precursor. A-PVP and 4-methylpropiophenone are also widely used in synthetic drug production. BMK glycidate is commonly used to synthesize controlled substances.

Anonymous

Williamchund (not verified)

on

Sat, 06/28/2025 - 17:24

These preppers have ‘go bags,’ guns and a fear of global disaster. They’re also left-wing
[url=https://tripscan.biz]tripscan top[/url]
This fear is where Marlon Smith’s interest in preparedness began. Growing up in Trinidad, he lived through an attempted coup in 1990 that sparked his concern the government would not be there in times of disaster. This only deepened after he moved to New York City and watched the aftermath of 9/11 and then Hurricane Katrina. “You see the inability of the government to truly help their citizens,” he said.

Smith, who now lives in New Jersey, runs a fashion company by day and spends his weekends teaching survival skills — including how to survive nuclear fallout. “People find it funny that I work in women’s evening wear and yet I do this hardcore prepping and survivalism in the woods,” he said.
https://tripscan.biz
tripscan войти
It’s hard to pin down the exact number of preppers in the US. Mills says 5 million is a reasonable estimate; others would say much higher. Chris Ellis, a military officer and academic who researches disaster preparedness, puts the figure at around 20 to 23 million using data from FEMA household surveys.

Figuring out the proportion of preppers on the left is perhaps even trickier. Mills, who has surveyed 2,500 preppers over the past decade, has consistently found about 80% identify as conservatives, libertarians or another right-wing ideology. He doesn’t see any dramatic upswing in left-wing preppers.
necdotal evidence, however, points to increased interest from this side of the political spectrum.

Several left-wing preppers told CNN about the burgeoning popularity of their newsletters, social media channels and prepping courses. Shonkwiler says subscriber numbers to his newsletter When/If increase exponentially whenever right-wing views make headlines, especially elections. He saw a huge uptick when Trump was reelected.

Smith has noticed more liberals among his growing client roster for prepping courses. He has an upcoming session teaching a group in the Hamptons — “all Democrats,” he said.

Smith is at pains to keep politics out of prepping, however, and makes his clients sign a waiver agreeing not to talk about it. “You leave your politics and your religion at the door. … You come here to learn; I’ll teach you,” he said.

Anonymous

CarlosBah (not verified)

on

Sat, 06/28/2025 - 17:44

<a href=https://safrole.com/>BMK glycidate</a> Ephedrine is often used to produce phenylacetone, a key intermediate in stimulant synthesis. From phenylacetone, substances like methylone, mephedrone (4-MMC), and 3-CMC can be made using methylamine. Phenylnitropropene, derived from nitroethane, is another precursor. A-PVP and 4-methylpropiophenone are also widely used in synthetic drug production. BMK glycidate is commonly used to synthesize controlled substances.

Anonymous

Iantoono (not verified)

on

Sat, 06/28/2025 - 18:01

Прошу прощения, что вмешался... Я разбираюсь в этом вопросе. Готов помочь.
[url=http://L.v.Eli.Ne.S.Swxzu@Hu.Feng.Ku.Angn..Ub..xn--.Xn--.U.K37@cgi.members.interq.or.jp/ox/shogo/ONEE/g_book/g_book.cgi]http://L.v.Eli.Ne.S.Swxzu@Hu.Feng.Ku.Angn..Ub..xn--.Xn--.U.K37@cgi.members.interq.or.jp/ox/shogo/ONEE/g_book/g_book.cgi[/url] посвящён занимательным вопросам и задачам по математике, лингвистике, физике и прочим естественным наукам.

Anonymous

Antionemob (not verified)

on

Sat, 06/28/2025 - 18:26

“It’s true that both plants are not yet operating at the capacity we originally targeted,” said the Climeworks spokesperson.
[url=https://tripscan.biz]трипскан вход[/url]
“Like all transformative innovations, progress is iterative, and some steps may take longer than anticipated,” they said.

The company’s prospective third plant in Louisiana aims to remove 1 million tons of carbon a year by 2030, but it’s uncertain whether construction will proceed under the Trump administration.

A Department of Energy spokesperson said a department-wide review was underway “to ensure all activities follow the law, comply with applicable court orders and align with the Trump administration’s priorities.” The government has a mandate “to unleash ‘American Energy Dominance’,” they added.

Direct air capture’s success will also depend on companies’ willingness to buy carbon credits.
https://tripscan.biz
tripscan top
Currently companies are pretty free to “use the atmosphere as a waste dump,” said Holly Buck, assistant professor of environment and sustainability at the University at Buffalo. “This lack of regulation means there is not yet a strong business case for cleaning this waste up,” she told CNN.

Another criticism leveled at Climeworks is its failure to offset its own climate pollution. The carbon produced by its corporate activities, such as office space and travel, outweighs the carbon removed by its plants.

The company says its plants already remove more carbon than they produce and corporate emissions “will become irrelevant as the size of our plants scales up.”

Some, however, believe the challenges Climeworks face tell a broader story about direct air capture.

This should be a “wake-up call,” said Lili Fuhr, director of the fossil economy program at the Center for International Environmental Law. Climeworks’ problems are not “outliers,” she told CNN, “but reflect persistent technical and economic hurdles faced by the direct air capture industry worldwide.”

“The climate crisis demands real action, not speculative tech that overpromises and underdelivers.” she added.

Some of the Climeworks’ problems are “related to normal first-of-a-kind scaling challenges with emerging complex engineering projects,” Buck said.

But the technology has a steep path to becoming cheaper and more efficient, especially with US slashing funding for climate policies, she added. “This kind of policy instability and backtracking on contracts will be terrible for a range of technologies and innovations, not just direct air capture.”

Direct air capture is definitely feasible but its hard, said MIT’s Buck. Whether it succeeds will depend on a slew of factors including technological improvements and creating markets for carbon removals, he said.

“At this point in time, no one really knows how large a role direct air capture will play in the future.”

Anonymous

Bebrapost#generic (not verified)

on

Sat, 06/28/2025 - 18:51

Зарабатывай на криптовалюте уже сегодня!
Открой для себя надёжную криптобиржу с высокой ликвидностью, минимальными комиссиями и продвинутой системой безопасности. Торгуй популярными криптовалютами на удобной платформе с простой регистрацией.
Начни свой путь в криптотрейдинге прямо сейчас — подробности здесь! =>><a href=https://www.nairienroo.com//>kra33.cc</a>

Anonymous

Ткацкий (not verified)

on

Sat, 06/28/2025 - 21:37

Индивидуальные шторы на заказ — стиль и комфорт в каждом доме, по вашим предпочтениям.

Шторы на заказ для любого интерьера, добавляет уют в ваше пространство.

Индивидуальные шторы: делаем ваш дом особенным, действуйте уже сегодня.

Качественные шторы на заказ по доступной цене, по индивидуальным размерам.

Создайте уют с помощью штор на заказ, выбирайте лучшее.

Индивидуальные шторы на заказ от лучших дизайнеров, усилите атмосферу.

Шторы на заказ: когда каждое окно в вашем доме особенное, решайте прямо сейчас.

Индивидуальный подход к созданию штор под заказ, закажите прямо сейчас.

Элегантные шторы на заказ для любого стиля, доверяйте профессионалам.

Шторы на заказ — это легко и удобно, создавайте свой стиль.
шторы на заказ [url=https://shtoryzakaz.ru/]шторы на заказ[/url] .

Anonymous

Briannafoona (not verified)

on

Sat, 06/28/2025 - 21:42

наконец в хорошем качестве!!!
toda tako da ti vsadki ohranijo svojo delo in lepo in estetsko videz throughout|during}|throughout|during}}|throughout|during}|throughout|during}}}|throughout|during}|throughout|during}}|throughout|during}|throughout|during}}}}|throughout|during}|throughout|during}}|throughout|during}|throughout|during}}}|throughout|during}|throughout|during}}|throughout|during}|for|during}}}}} desetletja, v [url=https://cit-peru.com/2025/06/27/strategie-e-pratiche-per-la-longevita-vi... potrebno upostevati pravila primerno negovanje in redna higiena ustne votline.

Anonymous

Thomasfoums (not verified)

on

Sat, 06/28/2025 - 21:45

holland apotheke <a href=" https://ivpi.in/profile/wmdhysxdme/ ">medicijnen snel bestellen</a> or <a href=" http://www.ypyp.de/url?q=https://medicijnpunt.shop ">medicijnen op recept online bestellen</a>
https://www.google.im/url?sa=t&url=https://medicijnpunt.shop mediceinen
[url=https://images.google.gp/url?sa=t&url=https://medicijnpunt.shop]recept online[/url] de apotheker and [url=https://vanpages.ca/profile/xgygjmzchw/]online apotheek frankrijk[/url] medicatie online bestellen

Anonymous

Tomgor (not verified)

on

Sat, 06/28/2025 - 22:16

аха, благодарю!
с этой целью и необходим мониторинг стоимости конкурентов. 2. по телефону. Размер оптовой скидки или продуманные цены можно также осведомиться просто соединившись с менеджером любого магазина [url=https://tamaandy.com/css-website-design-bwa/]https://tamaandy.com/css-we... по телефону!

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.