Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

Tags: 
projects
filament splicer

44242 Comments

Anonymous

CharlesDraks (not verified)

on

Sat, 05/10/2025 - 10:15

Прокладка трубы d 160 https://gnbureni-e.ru/горизонтальное-бурение.html

Пропусти момент как поставили бур-он же ,мне по началу тоже слух резало))) https://gnbureni-e.ru/index.html
Зонд укладывается в бур https://gnbureni-e.ru/index.html

После установки оборудования приступают непосредственно к процессу горизонтального бурения, который состоит из нескольких этапов:
ГНБ-прокол проводят под следующими объектами:
Прокладка трубы d 110 https://gnbureni-e.ru/горизонтальное-бурение.html

Установка трубопровода https://gnbureni-e.ru/index.html

Anonymous

MichaelSnold (not verified)

on

Sat, 05/10/2025 - 10:35

Guatemala has pledged a 40% increase in deportation flights carrying Guatemalans and migrants of other nationalities from the United States, President Bernardo Arevalo announced Wednesday during a press conference with US Secretary of State Marco Rubio.
[url=https://kra-38at.com]kra40.at[/url]
Guatemala has also agreed to create a task force for border control and protection along the country’s eastern borders. The force, composed of members of the National Police and army, will be tasked with fighting “all forms of transnational crime,” Arevalo said.
[url=https://kra37cc.com]кракен рабочий сайт[/url]
Foreign nationals who arrive in Guatemala through deportation flights will be repatriated to their home countries, Arevalo said, adding that the US and Guatemala would continue to have talks on how the process would work and how the US would cooperate.
[url=https://kpa34.at]kra31.cc[/url]
Arevalo also said that Rubio has voiced his support for developing infrastructure projects in the Central American nation. He added that his government would send a delegation to Washington in the coming weeks to negotiate deals for economic investments in Guatemala – which he said would incentivize Guatemalans to stay in their home country and not migrate to the US.

Arevalo said Guatemala has not had any discussions about receiving criminals from the US as El Salvador’s president has offered. He also insisted his country has not reached a “safe third country” agreement with the United States, which would require migrants who pass through Guatemala to apply for asylum there rather than continuing to the US.
kra32.at
https://at-kra32.cc

Anonymous

Jamesvef (not verified)

on

Sat, 05/10/2025 - 10:36

<p>Mixing Bitcoins is made simpler with Bitcoin blender. A mixer available both on the Clearnet and the Tor network. Offers complete control over the time-delays and fund-distribution. Charges a static fee of 0.3%. Maximum number of output addresses allowed is 10. Each address is charged an additional 0.0001BTC. Largest possible mix is 100 BTC, while smallest accepted deposit is 0.002 BTC. No registration required. Has a No Logs Policy, retains logs for 7-days by default. Although users can delete logs anytime before the 7-day period manually. Does provide Certificate of Origin. Also has an “Instant Dispatch” feature of delivering coins without any delay.</p><br><ul> <li><a href=https://yomix9.com/>Yomix</a> : It offers flexible transaction fees and a low minimum transaction limit</li> <li>Bitcoin Laundry : Uses stealth pools to anonymize transactions </li> <li>Mixero : Excellent customer support </li> <li>Coin Mixer : Fast payouts </li> <li>Coinmize : Zero-log policy </li> </ul><br><br><h2 id=menu1>1. Yomix - It offers flexible transaction fees and a low minimum transaction limit</h2><p>Another trustworthy mixer is Yomix which supports two cryptocurrencies with Ethereum to be added soon. The mixing process is quite typical and similar to the processes on other tumblers. It is possible to set a time-delay option up to 72 hours and a sender has an opportunity to split the transaction, so the funds are sent to several addresses. Thus, sender’s funds are more secured and untraceable.It is a simple service with a high level of anonymity. The Yomix mixing process is very simple and only takes a couple of minutes. You need to select one of the three supported cryptocurrencies (Bitcoin, Litecoin, Bitcoin Cash), enter the withdrawal address, set the transaction delay for any time up to 72 hours, send the coins to the specified address and wait for their delivery to the destination. This site is unlike the other three mixing pools. You can mix user’s coins: with incoming coins of other customers, private reserves of the service and investor coins. The service does not require registration. The mixing commission is not large and is taken from the mining commission, which is very convenient. The referral program at SmartMixer is one of the most profitable, during the first mixing operation you receive a smart code that is required to receive a discount on the commission, this discount can reach – 70%. After each transaction, the user receives a letter of guarantee. All data about it is deleted after a day, while maintaining the complete anonymity of the client.Compared to other Bitcoin tumblers, Yomix stands out from the crowd thanks to the additional anonymity offered. Users are given the option to split and merge coins into different wallets to various addresses. Additionally, Yomix provides support for unlimited addresses and does not require user registration. Although only Bitcoin is supported and there are no referral programs, ChipMixer does not charge users with any service fees. With the option to donate BTCs being made available.Being one of the earliest crypto coin tumblers, Yomix continues to be a easy-to-use and functional crypto coin mixer. There is a possibility to have two accounts, with and without registration. The difference is that the one without registration is less controllable by a user.The mixing process can be performed and the transaction fee is charged randomly from 1% to 3% which makes the transaction more anonymous. Also, if a user deposits more than 10 BTC in a week, the mixing service reduces the fee by half. With a time-delay feature the transaction can be delayed up to 24 hours. A Bitcoin holder should worry security leak as there is a 2-factor authentication when a sender becomes a holder of a PGP key with password. However, this mixing platform does not have a Letter of Guarantee which makes it challenging to address this tumbler in case of scams.</p><p> Pros: <ul><li>Uses stealth pools to anonymize transactions </li><li>Provides user-controlled time delays </li></ul></p> <h2 id=menu2>2. Bitcoin Laundry - Uses stealth pools to anonymize transactions </h2><p>Bitcoin Laundry makes the process of clearing bitcoins very easy and convenient for the client. This resource requires one confirmation of the transaction, after which new clean coins are sent to the specified wallet. Users can also control latency for processing their transactions. This is an offshore service, and its sites are also located offshore. This provides users with additional peace of mind and confidence that their data is strictly confidential. In addition, once the transaction is confirmed, users are sent a unique “delete logs” link, giving users the ability to manually delete their traces of transactions. Bitcoin Laundry charges a modest 0.5% commission. This makes BTC Blender ideal for users clearing large amounts of bitcoin.Bitcoin Laundry has a simple interface, it is easy to use and simple. Time-delay option can be set up to 24 hours. With regard to the fee, there is an additional fee of 0.0005 % per output address. As one of the few, this cryptocurrency tumbler provides a user with a special mixing code which guarantees that fresh crypto coins are not blended with previous deposits. Additional URL Blender is also here to guarantee that users can get to the tumbler, even if the main link is not working.Bitcoin Laundry supports Bitcoin and Litecoin cryptocurrencies bearing no logs policy. It requires a minimum deposit of 0.005 BTC, 0.015 LTC and the transaction fee is from 0.4% to 4% + mining fee 0.0003 for BTC, from 2% to 20% + mining fee 0.0003 for LTC. It supports multiple addresses of up to 5 and requires confirmation from 1 till 6. No registration is required and it does offer a referral program as well as a letter of guarantee.Bitcoin Laundry is a Bitcoin mixer that processes Bitcoin and Bitcoin Cash transactions. The site offers a referral program for new users and supports multiple recipient addresses. Transaction fees start at 0.5% plus an extra 0.0001 BTC for each extra address added.</p><p> Pros: <ul><li>Secure Exchange</li><li>Doesn’t require registration</li></ul></p> <h2 id=menu3>3. Mixero - Excellent customer support </h2><p>Mixero is a simple service that will increase your privacy while using Ethereum and making Ether transactions. Every single person have its right for a personal privacy even when transacting, trading or donating Ether. Due to ethereum blockchain features you are not completely anonymous while using ETH and here comes Ethereum Mixing Service to help you cut all ties between your old and fresh mixed ETH coins. Using Mixero mixer makes almost impossible to trace your new Ethereum Address..It is a simple service with a high level of anonymity. The Mixero mixing process is very simple and only takes a couple of minutes. You need to select one of the three supported cryptocurrencies (Bitcoin, Litecoin, Bitcoin Cash), enter the withdrawal address, set the transaction delay for any time up to 72 hours, send the coins to the specified address and wait for their delivery to the destination. This site is unlike the other three mixing pools. You can mix user’s coins: with incoming coins of other customers, private reserves of the service and investor coins. The service does not require registration. The mixing commission is not large and is taken from the mining commission, which is very convenient. The referral program at SmartMixer is one of the most profitable, during the first mixing operation you receive a smart code that is required to receive a discount on the commission, this discount can reach – 70%. After each transaction, the user receives a letter of guarantee. All data about it is deleted after a day, while maintaining the complete anonymity of the client.Another coin scrambler Mixtum offers you a so-called free trial period what means that there are no service or transaction fee charged. The process of getting renewed coins is also quite unique, as the tumbler requires a request to be sent over Tor or Clearnet and renewed coins are acquired from stock exchanges.What marks Mixero out from the crowd is the fact that this crypto mixer is able to process transactions for Bitcoin and Litecoin. There is a minimum deposit requirement for both Bitcoin and Litecoin. The site is able to support a maximum of 5 multiple addresses with confirmation required for all addresses. No site registration is required and there is a referral program in place. Additionally, Mixero can provide clients with a letter of guarantee.</p><p> Pros: <ul><li>It offers flexible transaction fees and a low minimum transaction limit</li><li>Excellent customer support </li></ul></p> <h2 id=menu4>4. Coin Mixer - Fast payouts </h2><p>Being honest, this isn’t the most feature-rich or control-rich Coin Mixer mixer that’s available out there. However, it still averages mixes over 700Bitcoin/day (claimed, not verified). The coins are claimed to be sourced from mining pools in the U.S, China and Europe. Obviously they do not keep any logs. Unfortunately, only 1 output address is allowed which is a bit of a downer. The time-delay can fully be set manually. It can be as low as 0 hours, or as high as 48 hours. Any other delay between this frame can be set using the provided slider. The fee isn’t randomized, neither is it user-controlled. It’s set at a solid 0.1% for all transactions. Accepts a minimum Bitcoin deposit of 0.010BTC. Maximum funds which can be currently mixed stand at 677 BTC. Number of required confirmations depend on the amount. Only 1 is required for mixes below 2.5BTC. For 25 BTC it needs 3 confirmations. 4 confirmations for 40BTC and 5 confirmations for 50 BTC are required respectively. Doesn’t require registrations.This is by far the most unique Coin Mixer I’ve ever encountered till date; that’s so pertaining to its “Time-travel” feature! (Whoa!) Basically instead of operating on the traditional receive unclean coins > send clean coins process, it instead uses a create wallet > fund it with chips beforehand > receive unclean coins > grant access to the pre-funded wallet process! This lets users spend the clean coins even before the unclean coins were sent to the mixer (because the wallet was pre-funded) and that’s the reason I termed it the time-travel mixer. Also it funds the wallets with “chips” which are not the same thing as Bitcoins, they’re basically the private keys which can be exported to your Bitcoin wallets to fund your wallets with the amount the chips were worth. It also lets users bet their Chips which has a chance of doubling the worth of their chips, other advanced features include merging which lets users combine two big chips into one single chip, or splitting which divides one big chip into two smaller chips. Its fee structure too is an unique- “Pay what you like” feature, which not only adds to user anonymity by randomizing the fee but also makes the service more affordable and customizable. Because users completely control when or how much funds they wish to withdraw, it translates into 100% user control on time-delays and distribution control. No logs are kept after a 7-day retention period; or there also is an option to manually scrub all logs whenever you wish prior to this 7-day period. The minimum deposit limit on the platform is 0.0001BTC.Bitcoin Mixer as the name suggests is another mixer, which lets us mix Coin Mixer. It’s an onion-only service, and the lack of a clearnet version increases anonymity. Offers quite a bit of control to the users regarding percentage distribution and time-delays. Percentage distribution can be specified manually, while time-delays can only be “selected” from the provided options. Minimum possible delay is 1hour, maximum being 24 Hours, with multiple choices in between. Although “instant” payouts without any delay are possible as well. A total of 5 output addresses can be specified for each mix. The fee isn’t user-controlled, and is set at 1% of the mix. Each additional address costs an additional 0.000001 BTC. They do not store any logs whatsoever. The minimum deposit requirement is 0.0002 BTC, smaller deposits are considered donations and aren’t refunded.An interesting cryptocurrency tumbler is Coin Mixer. It supports bitcoin and Ethereum cryptocurrencies bearing no logs policy. It requires a minimum deposit of 0.2 BTC and the transaction fee is 2–5%. It does not support multiple addresses and requires 6 confirmations. No registration is required and it does not offer a referral program.</p><p> Pros: <ul><li>24/7 customer support </li><li>Proven track record</li></ul></p> <h2 id=menu5>5. Coinmize - </h2><p>How it works: it has its own cryptocurrency reserve, which can be represented as a chain of bitcoins. When you transfer your funds to the Blender io, the resource sends your funds to the end of the chain and sends you new coins from the beginning of the chain that have nothing to do with the old coins. therefore, there can be no connection between incoming and outgoing coins. Only coins that go from your wallet to the Coinmize address can be tracked through the public ledger, but no further. Blender io does not require you to register or provide any information other than the “receiving address“! It does not require identity confirmation and registration, but it is mandatory to provide in addition to the “receiving address”. The additional withdrawal delay feature has been extended to the maximum and offers installation up to 24 times a day. Other servers do not have such a wide range of latencies. Each set of unrefined coins can be split into as many as 8 pieces and sent to different addresses with an additional fee of 0.00008 BTC per address.Coinmize is an extremely basic mixer. It allows only 1 output address to be specified. The UI too is extremely simple and doesn’t feature any sliders or calculators. Users simply enter their output address and receive the funds as simple as that. The minimum mix amount is 0.001BTC while the maximum is 100BTC. Amounts out of these limits will not be mixed. Users have no control on the fee and it’s randomized between 0.5% and 1%. An additional 0.0005 BTC miner fee also exists. The time-delay too (if any) isn’t user controlled and the mixer sends out funds at its own pace. Its working infrastructure seems to differ from other mixers out there. While most other mixers have a “reserve”, this platform seems to use miners. The unclean coins are sent to “miners”, and the clean coins too are claimed to be sent out from “miners”. It however doesn’t keep any logs and all information is deleted once a transaction is complete.In the past, Coinmize was one of the most popular Bitcoin mixers available in the cryptocurrency world. The first of its kind, this bitcoin mixer was shut down temporarily before returning to limited service. Nowadays, Coinmize is primarily used to facilitate anonymous individual transactions.Being one of the earliest crypto coin tumblers, Coinmize continues to be a easy-to-use and functional crypto coin mixer. There is a possibility to have two accounts, with and without registration. The difference is that the one without registration is less controllable by a user.The mixing process can be performed and the transaction fee is charged randomly from 1% to 3% which makes the transaction more anonymous. Also, if a user deposits more than 10 BTC in a week, the mixing service reduces the fee by half. With a time-delay feature the transaction can be delayed up to 24 hours. A Bitcoin holder should worry security leak as there is a 2-factor authentication when a sender becomes a holder of a PGP key with password. However, this mixing platform does not have a Letter of Guarantee which makes it challenging to address this tumbler in case of scams.</p><p> Pros: <ul><li>Zero-log policy </li><li>Excellent customer support </li></ul></p>

Anonymous

Traceyadets (not verified)

on

Sat, 05/10/2025 - 10:48

Смотрел в плохом качестве, надо глянуть в нормальном.
на тот момент кроссовки являлись не крайне дороги в отличие от [url=http://legalpenguin.sakura.ne.jp/weblog/blosxom.cgi/Game/lamulana/playdi... классической кожаной обувью. будто бы теннисные кроссовки максимально приспособлены для указанного вида состязаний, баскетбольная обувь предназначена подходят для этой игры.

Anonymous

CharlesPracy (not verified)

on

Sat, 05/10/2025 - 11:51

doctor-reviewed advice <a href=" http://bbs.knifriend.com.cn/home.php?mod=space&uid=1690836 ">modafinil 2025</a> or <a href=" https://clients1.google.kg/url?q=https://modafinilmd.store ">buy modafinil online</a>
http://wap.3gbug.org/gourl.asp?ve=2&ff=&url=http_modafinilmd.store legal Modafinil purchase
[url=https://image.google.gp/url?q=https://modafinilmd.store]buy modafinil online[/url] Modafinil for sale and [url=http://asresin.cn/home.php?mod=space&uid=102626]modafinil legality[/url] safe modafinil purchase

Anonymous

GabrielRehah (not verified)

on

Sat, 05/10/2025 - 12:51

основными достоинствами проекта были [url=https://morphomics.science/wiki/-_%D0%9C%D1%8B_%D0%9F%D0%BE%D0%BC%D0%BE%... рациональность и экономичность. Найденова, крупного московского предпринимателя, известного российского историка, мецената и благотворителя запечатлены Верхние торговые ряды незадолго до сноса.

Anonymous

Robertdiodo (not verified)

on

Sat, 05/10/2025 - 13:05

no doctor visit required <a href=" https://quantrinet.com/forum/member.php?u=808383 ">best price for Viagra</a> or <a href=" https://www.google.li/url?sa=t&url=https://maxviagramd.shop ">legit Viagra online</a>
http://msichat.de/redir.php?url=http://maxviagramd.shop order Viagra discreetly
[url=http://toolbarqueries.google.bt/url?sa=t&url=https://maxviagramd.shop]sa... Viagra shipping[/url] fast Viagra delivery and [url=http://www.donggoudi.com/home.php?mod=space&uid=2926526]order Viagra discreetly[/url] no doctor visit required

Anonymous

Vivianlep (not verified)

on

Sat, 05/10/2025 - 13:26

По моему мнению Вы пошли ошибочным путём.
сегодня они оснащены несколькими линиями выплат и специальными символами, запускающим дополнительные игровые результативность и бонусные раунды, [url=https://beeah-uae.com/help-to-make-your-own-personal-extra-periods-advan... повышая интерактивность и удовольствие от игрового процесса.

Anonymous

Alquinoflany (not verified)

on

Sat, 05/10/2025 - 14:55

В 1975 году произошла судьбоносная встреча Шелковского с коллекционером Георгием Костаки, [url=https://www.escortskart.com/user/profile/JovitaLeneh]https://www.escorts... который сразу же увидел в художнике продолжателя традиций русского авангарда и приобрел три скульптуры для вашего собрания.

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.