Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

Tags: 
projects
filament splicer

41309 Comments

Anonymous

NormanBak (not verified)

on

Fri, 03/21/2025 - 19:31

В ассортименте Банда Казино представлен широкий выбор развлечений. Здесь имеются и популярные краш-игры, завоевавшие признание огромного количества игроков <a href="https://bacek.ru/viewtopic.php?id=24997#p190092">Казино Banda официальный сайт</a>

Anonymous

RonnieTrewS (not verified)

on

Fri, 03/21/2025 - 20:59

nha cai k8 <a href=" http://www.yya28.com/home.php?mod=space&uid=1103091 ">k8 bet</a> or <a href=" https://images.google.tl/url?q=https://k8viet.guru ">k8 bet</a>
http://www.cuautocoupon.com/HowItWorks/Default.aspx?returnurl=https://k8... k8vip
[url=http://images.google.com.mm/url?q=https://k8viet.guru]link vao k8[/url] nha cai k8 and [url=https://www.oppo.xyz/home.php?mod=space&uid=14226]link vao k8[/url] nha cai k8

Anonymous

Joshuahor (not verified)

on

Fri, 03/21/2025 - 21:31

The crypto industry is advancing. (Just don’t ask it where it’s going.)
[url=https://trustwa11et.org]trust wallet[/url]
After a dramatic start to the year, the crypto industry is settling into a new reality — one in which the White House is laying out the red carpet and promising an unprecedented level of support.

Crypto, a roughly 15-year-old industry that’s largely operated on the fringes of finance, is at a crossroads. For years, it has blamed a hostile regulatory environment for not allowing it to unleash its supposedly revolutionary technology on Americans. Now, though, their favorite bogeyman, Gary Gensler, the Securities and Exchange Commission chief under President Joe Biden, is gone. Crypto cheerleaders have been installed throughout the government.

The SEC has dropped several enforcement cases against crypto companies and, starting Friday, is hosting a series of public roundtables “to discuss key areas of interest in the regulation of crypto assets.”

Under President Donald Trump, there’s virtually nothing stopping crypto companies from creating and selling their products.

At the same time, the same White House’s chaotic trade policy is undermining financial markets’ appetite for risk, leaving bitcoin in limbo, more than 20% off from its record high in January. And while the industry is grateful for all the attention, the White House’s embrace of some of crypto’s less savory aspects, like meme coins, has given serious investors pause.

Given the enormous potential for the $3 trillion industry in this moment, I checked in with Eswar Prasad, a Cornell University professor of international trade and the author of the 2021 book “The Future of Money,” about the forces disrupting financial technologies.

Fundamentally, Prasad brings a pragmatist’s view of crypto that is as refreshing as it is rare in a subject area that tends to attract zealots and loudmouths. We spoke over the phone shortly after the first-of-its-kind White House crypto summit earlier this month.

The following interview has been edited for length and clarity.

Nightcap: We just saw a pretty wild thing happen with the crypto summit — hard to imagine a scenario like that taking place under any previous administration. What were your takeaways?

Eswar Prasad: The crypto industry is kissing the ring, and I think it’s getting exactly what it wants from the Trump administration, which is the legitimacy provided by government oversight, coupled with what is almost certain to be quite light touch and non-inclusive regulation.

And I think we saw many of the major players in the crypto industry essentially using the opportunity to not just thank Trump, but try to make the point, which seemed to resonate with Trump, that this industry can power, in some sense, a resurgence of a certain part of the US economy.

Anonymous

NormanBak (not verified)

on

Fri, 03/21/2025 - 22:25

В ассортименте Банда Казино представлен широкий выбор развлечений. Здесь имеются и популярные краш-игры, завоевавшие признание огромного количества игроков <a href="http://center-2.ru/forum/?mingleforumaction=viewtopic&t=19035#postid-368... Casino</a>

Anonymous

NormanBak (not verified)

on

Fri, 03/21/2025 - 22:32

В ассортименте Банда Казино представлен широкий выбор развлечений. Здесь имеются и популярные краш-игры, завоевавшие признание огромного количества игроков <a href="https://www.ftsugra.ru/forum/messages/forum2/topic2529/message2577/?resu...Казино Banda</a>

Anonymous

NormanBak (not verified)

on

Fri, 03/21/2025 - 23:33

В ассортименте Банда Казино представлен широкий выбор развлечений. Здесь имеются и популярные краш-игры, завоевавшие признание огромного количества игроков <a href="http://www.1bm.ru/forum/viewtopic.php?p=529582#529582">Banda Casino официальный сайт</a>

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.