Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

Tags: 
projects
filament splicer

23006 Comments

Anonymous

ThomasInots (not verified)

on

Fri, 03/07/2025 - 14:53

Always professional, whether dealing domestically or internationally.
[url=https://lisinoprilpharm24.top/#]lisinopril pill color[/url]|[url=https://clomidpharm24.top/#]how can i get generic clomid without insurance[/url]|[url=https://cytotecpharm24.top/#]order cytotec without rx[/url]|[url=https://gabapentinpharm24.top/#]maximum dosage of gabapentin[/url]|[url=https://cipropharm24.top/#]can i purchase generic cipro price[/url]
Love the seasonal health tips they offer.

Anonymous

DonaldDract (not verified)

on

Fri, 03/07/2025 - 17:18

<a href=https://vibrometro1a.com>Vibracion del motor</a>
Dispositivos de ajuste: fundamental para el funcionamiento uniforme y óptimo de las máquinas.

En el ámbito de la ciencia actual, donde la eficiencia y la fiabilidad del sistema son de alta importancia, los sistemas de ajuste desempeñan un tarea vital. Estos equipos dedicados están desarrollados para equilibrar y asegurar partes móviles, ya sea en equipamiento industrial, automóviles de desplazamiento o incluso en equipos hogareños.

Para los técnicos en mantenimiento de sistemas y los profesionales, operar con sistemas de equilibrado es importante para proteger el rendimiento uniforme y confiable de cualquier dispositivo rotativo. Gracias a estas soluciones avanzadas modernas, es posible disminuir considerablemente las oscilaciones, el estruendo y la tensión sobre los cojinetes, prolongando la longevidad de componentes caros.

Igualmente importante es el función que desempeñan los equipos de balanceo en la servicio al usuario. El ayuda experto y el conservación continuo empleando estos equipos permiten dar servicios de gran estándar, incrementando la contento de los consumidores.

Para los propietarios de negocios, la inversión en sistemas de balanceo y dispositivos puede ser importante para mejorar la rendimiento y productividad de sus sistemas. Esto es principalmente relevante para los emprendedores que administran pequeñas y intermedias empresas, donde cada aspecto es relevante.

Asimismo, los aparatos de calibración tienen una amplia utilización en el campo de la prevención y el control de nivel. Posibilitan encontrar eventuales problemas, evitando mantenimientos caras y problemas a los aparatos. Incluso, los datos recopilados de estos aparatos pueden aplicarse para mejorar procedimientos y mejorar la reconocimiento en motores de investigación.

Las campos de implementación de los sistemas de equilibrado incluyen múltiples industrias, desde la manufactura de vehículos de dos ruedas hasta el seguimiento del medio ambiente. No interesa si se habla de extensas producciones manufactureras o pequeños establecimientos domésticos, los aparatos de calibración son indispensables para promover un rendimiento óptimo y sin riesgo de detenciones.

Anonymous

ThomasInots (not verified)

on

Fri, 03/07/2025 - 19:43

They're reshaping international pharmaceutical care.
[url=https://lisinoprilpharm24.top/#]lisinopril for sleep[/url]|[url=https://clomidpharm24.top/#]can i purchase cheap clomid without prescription[/url]|[url=https://cytotecpharm24.top/#]where can i get cheap cytotec no prescription[/url]|[url=https://gabapentinpharm24.top/#]gabapentin 300 mg cap teva[/url]|[url=https://cipropharm24.top/#]how to get cheap cipro without dr prescription[/url]
They have strong partnerships with pharmacies around the world.

Anonymous

Marcosgop (not verified)

on

Fri, 03/07/2025 - 20:59

DID предоставляет номера с кодами более чем 150 стран. Это позволяет выбрать номер, соответствующий вашему текущему местоположению или бизнес-целям <a href="https://www.techweek.ru/virtualnyj-nomer-navsegda-ot-did-virtual-numbers...виртуальный номер навсегда</a>

Anonymous

Marcosgop (not verified)

on

Fri, 03/07/2025 - 20:59

DID предоставляет номера с кодами более чем 150 стран. Это позволяет выбрать номер, соответствующий вашему текущему местоположению или бизнес-целям <a href="https://xperia-droid.ru/virtualnyj-nomer-navsegda-ot-did-virtual-numbers...купить виртуальный номер телефона</a>

Anonymous

ThomasInots (not verified)

on

Fri, 03/07/2025 - 23:22

They set the tone for international pharmaceutical excellence.
[url=https://lisinoprilpharm24.top/#]lisinopril 10 mg tablets price[/url]|[url=https://clomidpharm24.top/#]can i purchase generic clomid no prescription[/url]|[url=https://cytotecpharm24.top/#]where buy generic cytotec for sale[/url]|[url=https://gabapentinpharm24.top/#]what if i miss my dose of gabapentin[/url]|[url=https://cipropharm24.top/#]rx cipro[/url]
They provide access to global brands that are hard to find locally.

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.