Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

Tags: 
projects
filament splicer

27591 Comments

Anonymous

Georgecor (not verified)

on

Tue, 03/04/2025 - 20:23

Hidden World War II tunnels to open to public
[url=https://advocatdnepr.com.ua/ru/military-lawyer-advocate-mena/ ]военный адвокат Днепр[/url]

In this week’s roundup of travel news: Denver’s weed church, zodiac predictions for the Year of the Snake, plus what promises to be London’s most ambitious – and deepest – new visitor attraction.

Going underground
Some 30 meters (98 feet) below central London lies a mile-long network of tunnels that is set to be the UK capital’s glitziest new tourist attraction, according to the company that’s secured planning approval for the $149 million transformation.

The Kingsway Exchange Tunnels were built in the 1940s to shelter Londoners from the Blitz bombing campaign during World War II. That was the last time they were open to the general public. Their next wartime role was as the home of Britain’s top-secret Special Operations Executive, an offshoot of MI6 and the real-life inspiration for James Bond’s Q Branch.

The new attraction will be a memorial to the Blitz, which Angus Murray, chief executive of the London Tunnels, told Reuters will be part museum, part exhibition and part entertainment space.

The plan is to open to the public by late 2027 or early 2028. Read more here in our earlier story announcing the project.

If you can’t wait until then to get down in the city’s bowels, London Transport Museum runs exclusive guided tours of its abandoned tube stations, including Down Street, a secret underground bunker that helped win World War II.
Year of the Snake
The first new moon of the lunar calendar fell on January 29, ushering in the Year of the Snake and the 15-day Spring Festival, a big annual highlight in China and for Chinese communities around the world.

Here’s our guide to what it all means and, whether you’re a horse, goat, monkey, rooster or any other sign in the Chinese zodiac, here’s what the stars say are your predictions for the year ahead.

Food is, of course, a key part of the celebrations. One of the most fun elements is the “prosperity toss,” kind of like a food fight with chopsticks but seasoned with auspicious blessings for the year ahead.

For the culinarily adventurous, 2025 is a good time to visit Hong Kong and see how restaurants serve snake. Delights include snake balls and snake soup – and be sure to leave room for the penis wine. Watch here.

Anonymous

LucioLef (not verified)

on

Tue, 03/04/2025 - 20:23

На днях наткнулся на http://www.jcdqzdh.com/home.php?mod=space&uid=515262 - gizbo casino рабочее,
и захотел рассказать своим опытом.
Сайт кажется очень привлекательной,
особенно когда ищешь качественное игровое заведение.
Есть кто-то реально пробовал Gizbo Casino?
Расскажите своим мнением!

Особенно интересно узнать про бонусы и акции.
Допустим, есть ли Gizbo Casino особые условия для новых пользователей?
Также интересно, как найти рабочее зеркало Gizbo Casino, если официальный сайт недоступен.

Видел много противоречивых мнений, но хотелось бы узнать реальные советы.
Например, где эффективнее использовать бонусы на Gizbo Casino?
Поделитесь своим мнением!

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.