Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

Tags: 
projects
filament splicer

43019 Comments

Anonymous

WilliamHal (not verified)

on

Fri, 08/08/2025 - 17:40

<a href=https://t.me/WinBigWin7777>Казино</a> Казино Азартные игры всегда привлекали людей своей непредсказуемостью и возможностью быстро разбогатеть. Казино, как место концентрации этих игр, стали символом роскоши и риска. От наземных заведений Лас-Вегаса до онлайн-платформ, казино предлагают широкий спектр развлечений для любителей азарта.

Anonymous

Tonyainoge (not verified)

on

Fri, 08/08/2025 - 17:54

В этом что-то есть. Теперь мне стало всё ясно, благодарю за информацию.
Зеркало дает такой же функционал, [url=http://test3.itbezgranits.ru/2025/07/22/pinko-kazno-oficialnyj-sajt-vse-... что и центральный сайт. во-вторых, 24-часовая служба содействия готова помочь с разными вопросами.

Anonymous

RobertFealt (not verified)

on

Fri, 08/08/2025 - 19:36

<a href=https://t.me/ekvitistraha>Покерные турниры</a> Этикет в покере Этикет в покере – это набор правил поведения, которые помогают поддерживать уважительную атмосферу за столом.

Anonymous

Williamber (not verified)

on

Fri, 08/08/2025 - 23:10

הקשבתי למילים, רציתי אותה בטיפשות. רציתי כמו נמר רעב, לדמיין איך אני מכניס אותה למיטה, ומזיין בצדקתי. כשהסתכלתי מסביב והערכתי לאן הם יכולים ללכת, חשבתי שאין מקום אחר מלבד התוספת. האחות בנתה <a href=https://gaypassslut.com/>see here</a>

Anonymous

Site - Mn (not verified)

on

Sat, 08/09/2025 - 00:12

Hey people,

I've been checking out the world of internet gambling lately, and I’ve gotta say — it’s way more exciting than I expected. At first, I was super skeptical. I mean, how do you even rely on an online platform with your hard-earned money, right? But after spending hours researching (and trying out a few sketchy sites so you don’t have to), I figured out a few things that distinguish a legit casino from a total scam. First off, if you’re new to all this, here’s the golden rule: **licenses matter**. If a casino doesn’t have a proper license (like from the Malta Gaming Authority or the UKGC), just walk away. No bonus is worth the trouble of never seeing your funds again. Also — and I know no one wants to — check the terms. That’s the only way to know what kind of wagering requirements they’ve slapped onto those so-called “amazing” bonuses.

Now, let me share a site I’ve been playing on these last few weeks. It’s been a game-changer. The interface? Super clean. Payouts? Fast as hell. And the game selection? *Insane*. Slots, live dealers, blackjack, even some oddball options I hadn’t tried before. Check it out here: <a href="https://forum.mojabudowa.pl/temat/17/5388">plinko demo</a> What really stood out was the customer service. I had a tiny issue with a bonus not working, and they got back to me in like instantly. Compare that to other sites where you’re just ghosted by support — yeah, not worth it.

Also, if you’re into bonuses (and who isn’t?), this place offers some awesome ones. But here’s the trick: don’t just chase bonuses. It’s smarter to stick to fair terms than a huge bonus you’ll never be able to withdraw. I’m not saying you should go and blow your whole paycheck — please don’t. But if you’ve got a little extra spending money and you’re looking for a fun way to unwind, online casinos can totally deliver. Just play smart, set a budget, and don’t treat it like a side hustle. It’s for fun, not for a paycheck. Anyway, just wanted to drop my experience here in case anyone’s interested or trying to find a trustworthy place to play. If you’ve got your own go-to sites or even some casino nightmares, I’m all ears — love talking shop about this stuff.

Good luck out there, and spin smart, win big ??

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.