Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

Tags: 
projects
filament splicer

41834 Comments

Anonymous

Williamber (not verified)

on

Fri, 08/08/2025 - 23:10

הקשבתי למילים, רציתי אותה בטיפשות. רציתי כמו נמר רעב, לדמיין איך אני מכניס אותה למיטה, ומזיין בצדקתי. כשהסתכלתי מסביב והערכתי לאן הם יכולים ללכת, חשבתי שאין מקום אחר מלבד התוספת. האחות בנתה <a href=https://gaypassslut.com/>see here</a>

Anonymous

Site - Mn (not verified)

on

Sat, 08/09/2025 - 00:12

Hey people,

I've been checking out the world of internet gambling lately, and I’ve gotta say — it’s way more exciting than I expected. At first, I was super skeptical. I mean, how do you even rely on an online platform with your hard-earned money, right? But after spending hours researching (and trying out a few sketchy sites so you don’t have to), I figured out a few things that distinguish a legit casino from a total scam. First off, if you’re new to all this, here’s the golden rule: **licenses matter**. If a casino doesn’t have a proper license (like from the Malta Gaming Authority or the UKGC), just walk away. No bonus is worth the trouble of never seeing your funds again. Also — and I know no one wants to — check the terms. That’s the only way to know what kind of wagering requirements they’ve slapped onto those so-called “amazing” bonuses.

Now, let me share a site I’ve been playing on these last few weeks. It’s been a game-changer. The interface? Super clean. Payouts? Fast as hell. And the game selection? *Insane*. Slots, live dealers, blackjack, even some oddball options I hadn’t tried before. Check it out here: <a href="https://forum.mojabudowa.pl/temat/17/5388">plinko demo</a> What really stood out was the customer service. I had a tiny issue with a bonus not working, and they got back to me in like instantly. Compare that to other sites where you’re just ghosted by support — yeah, not worth it.

Also, if you’re into bonuses (and who isn’t?), this place offers some awesome ones. But here’s the trick: don’t just chase bonuses. It’s smarter to stick to fair terms than a huge bonus you’ll never be able to withdraw. I’m not saying you should go and blow your whole paycheck — please don’t. But if you’ve got a little extra spending money and you’re looking for a fun way to unwind, online casinos can totally deliver. Just play smart, set a budget, and don’t treat it like a side hustle. It’s for fun, not for a paycheck. Anyway, just wanted to drop my experience here in case anyone’s interested or trying to find a trustworthy place to play. If you’ve got your own go-to sites or even some casino nightmares, I’m all ears — love talking shop about this stuff.

Good luck out there, and spin smart, win big ??

Anonymous

Spize (not verified)

on

Sat, 08/09/2025 - 02:29

КРАКЕН САЙТ — ОФИЦИАЛЬНЫЙ САЙТ ДАРКНЕТ МАРКЕТПЛЕЙСА КРАКЕН

Ищете Кракен сайт? Вам нужна официальная ссылка на сайт Кракен? В этом посте собраны все актуальные ссылки на сайт Кракен, которые помогут вам безопасно попасть на Кракен даркнет через Tor.

Актуальное зеркало 1: https://kro36.net

Актуальное зеркало 2: https://kro36.com

Актуальное зеркало 3: https://captcha-kra36.shop

Кракен Маркетплейс — это одна из самых популярных платформ в даркнете, которая предоставляет пользователям доступ к анонимным рынкам. Однако найти рабочую [url=https://captcha-kra36.shop]Кракен ссылку[/url] или официальный [url=https://captcha-kra36.shop]Кракен сайт[/url] может быть сложной задачей, особенно для новичков.
________________________________________

Как найти рабочую Кракен ссылку?
Найти рабочую Кракен ссылку может быть непросто из-за большого количества мошенников, предлагающих поддельные сайты. Чтобы найти актуальные ссылки, следуйте этим советам:
• Пользуйтесь только проверенными источниками. Это могут быть популярные форумы или посты, специализирующиеся на даркнет-площадках.
• Ищите актуальные зеркала через сайты-сообщества, посвящённые даркнету.

ОФИЦИАЛЬНАЯ ССЫЛКА на Кракен сайт:

1. https://captcha-kra36.shop

2. https://kro36.net

3. https://kro36.com
________________________________________

Как зайти на Кракен сайт через Tor?
Для безопасного входа на Кракен сайт следуйте этим шагам:

1. Установите браузер Tor:
Перейдите на официальный сайт Tor Project и скачайте браузер. Установите его на ваше устройство.

2. Получите рабочую Кракен ссылку:
Воспользуйтесь актуальной ссылкой из наших источников.

3. Откройте ссылку в Tor:
Запустите браузер Tor, вставьте ссылку в адресную строку и нажмите Enter.
________________________________________

Преимущества использования Кракен Даркнет.
Почему пользователи выбирают [url=https://kro36.com]Кракен Маркетплейс[/url] среди других даркнет-платформ?

• Безопасность: Платформа обеспечивает высокий уровень защиты данных пользователей.

• Анонимность: Все транзакции проходят через сеть Tor, что исключает возможность отслеживания.

• Удобство: Интуитивно понятный интерфейс делает платформу доступной даже для новичков.

Регулярные обновления зеркал помогают пользователям всегда оставаться в курсе рабочих ссылок и избегать мошенничества.

________________________________________

Заключение

Вход на Кракен Даркнет может быть безопасным и удобным, если вы используете проверенные Кракен ссылки и следуете всем рекомендациям. Для получения доступа убедитесь, что используете только надёжные источники и избегаете фишинговых сайтов.
Следуя нашим инструкциям, вы сможете найти рабочую ссылку на Кракен сайт и воспользоваться всеми возможностями платформы без риска для себя.
________________________________________

Ключевые слова: Кракен Даркнет, Кракен ссылка, Кракен сайт, Кракен Онион, Кракен Маркетплейс, Кракен актуальная ссылка.

Anonymous

GabrielAsype (not verified)

on

Sat, 08/09/2025 - 05:16

Stunning images show Arctic glaciers’ dramatic retreat
[url=https://cmpt-base.com/obzory/item/467096-roman-viktorovich-vasilenko-ros...гей порно молодые[/url]
Swedish photographer Christian Aslund is riding a small boat along the coast of Spitsbergen, an island in the Norwegian archipelago of Svalbard. Here, deep into the Arctic Circle and midway between Norway and the north pole, he is investigating the health of the glaciers, by comparing them to what they looked like in archival photos.

He takes a picture, trying to place his boat in the exact position occupied by an explorer who took a similar photograph over 100 years ago. But the difference is striking: in the shot from 1918, the boat is heading towards a massive glacier. In the image Aslund took in 2024, he is heading toward what looks like almost bare land.

The comparison is part of a series that Aslund worked on in collaboration with the Norwegian Polar Institute and Greenpeace, to document the retreat of Svalbard’s glaciers over the last century. He visited the area twice — in 2002 and in 2024 — and picked which sites to photograph based on historical images that he found in the institute’s archives.
“In 2002, the widespread knowledge, or acceptance, of climate change wasn’t as broad as it is now,” Aslund says. He published the first set of photos over 20 years ago to create awareness of how much the glaciers were receding. But to his surprise, he received some comments suggesting that the images had been “Photoshopped,” that the glaciers were just expanding and contracting naturally, or that he had taken the pictures in the summer and compared them to archival shots taken in the winter: “But they are not — if you look at at the archive photos, you see that they don’t have any sea ice and not enough snow on the mountains (for it to be winter). And also, in the winter, it’s permanently dark.”

In the summer of 2024, he decided to return, taking pictures at the exact same locations as before. “I had a feeling that the glaciers would have receded even more,” he says, “and that was confirmed. We wanted to show that these glaciers are not going back and forth. They are constantly being pulled back by a warming climate. It’s a major difference.”

The Arctic has been warming twice as fast as the rest of the world since the year 2000, according to the National Oceanic and Atmospheric Administration, but according to other estimates it has warmed even more — four times faster than the global average since 1979. NASA says summer Arctic sea ice is shrinking by 12.2% per decade due to warming temperatures.

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.