Air compressor for laser cutter / engraver

kirill's picture
Submitted by kirill on Mon, 03/24/2014 - 11:12

All Laser Cutters need two additional devices which move air: blower which removes air / extracts smoke from machine and air compressor as a source for compressed air for so called air assist.

Why and How

Laser cuts by heat, very high heat focused in tight beam. Side products of high heat are smoke and fire, both are not welcomed addition, smoke disperses laser beam reducint it's efficienty and fire causes charring of material / edges and can even get out of control causing serious emergency.

Fire needs air to burn but it will also die if you blow too hard, think of a candle in the wind. This is essentialy what air assist is for: compressed air is extruded directly at the laser head in a very tight stream and is directed at the place where laser touches material.

Pressure and volume of air

Pressure of air is key variable for air assist efficienty, in our shop we found out that optimal value is between 2 and 3.5 bar (31-50psi).

To achieve required pressure compressor needs to push certain volume of air through air assist opening, exact volume depends on size of the opening and desired pressure. High quality laser cutter heads have small and finely tuned openings while cheaper chinese cutters just blow in general direction via large holes.

Proper compressor

When choosing compressor you need to consider if it will be able to constantly provide desired pressure and volume of air. Small airbrush compressors small compressors boast impressive pressure figures but really poor flow rates sufficient only for airbrush pistols. Even if small compressor would be able to push enough air it will likely overheat in couple of minutes.

Our laser cutter came with small membrane pump (Smallest on the picture), I do not know what specifications it has but stream of air was very weak. It is sufficient if all you want to do is engrave, although even then we got substantial smoke traces around engraved picture.

Second unit we got was AS-48A compressor, it was rated for volume of ~2.4cfm and had a 1 gallon tank which can be filled to 58 PSI. It managed to give us constant 1 bar (14 PSI) of pressure, but it had to run all the time and overheat badly within 5 minutes.

Third and current compressor we got was 6cfm rated belt driven unit with 13 gallon tank which is filled to ~100psi. With this unit we can run at constant ~2bar (31psi) without fear of overheating since compressor engine is not on all the time. Using reserve air in tank we can also push up to 3.5bar (50psi) for short jobs.

The best setup in my opinion would be compressor rated to >6cfm, large 70+ gallons tank rated to 10bar (140psi) and software air control via solenoid valve.

Air Quality

Air which comes out of Air Assist nozzles should be as clean as possible, warer and oil vapors should be removed from it. Proper inline air filers are must have.

Noise

When choosing compressor, please do consider noise, cheap direct driven compressors are terribly noisy! It is one thing to hear noise in the shop and another to have that ratchet around you all the time. Our general advise: Choose belt driven units, they run at lower RPMs and cause much less noise. Our compressor has noise rate of 68dba, we can work without ear plugs when it runs.

Automating air flow

Good laser controller boards come with option to control air flow, it is basically a relays head which is supposed to trigger a solenoid valve when needed (controlled by software), our Ruida controller has this head, we plan to make use of it soon and document it here.

Useful links

 

Tags: 
workshop
laser
air

8564 Comments

Anonymous

luckystar casin... (not verified)

on

Mon, 09/08/2025 - 08:14

Hey everyone,

I've been exploring the world of online gaming lately, and I’ve gotta say — it’s surprisingly fun. At first, I was super skeptical. I mean, how do you even trust an online platform with your hard-earned money, right? But after doing a ton of research (and trying out a few dodgy sites so you don’t have to), I figured out a few things that distinguish a trustworthy casino from a risky mess. First off, if you’re new to all this, here’s the golden rule: **regulation is key**. If a casino doesn’t have a proper license (like from the MGA or the UKGC), just run. No bonus is worth the gamble of never seeing your money again. Also — and I know no one wants to — check the terms. That’s the only way to know what kind of wagering requirements they’ve slapped onto those so-called “generous” bonuses.

Now, let me share a site I’ve been playing on these last few weeks. It’s been a breath of fresh air. The interface? Super smooth. Payouts? Fast as hell. And the game selection? *Wild*. Slots, live dealers, blackjack, even some oddball options I hadn’t tried before. Check it out here: <a href="http://www.rapbattles.com/forum/showthread.php?506471-games&p=8997891#po... casino online</a> . What really impressed me was the help desk. I had a tiny issue with a bonus not working, and they got back to me in like no time. Compare that to other sites where you’re just ghosted by support — yeah, no thanks.

Also, if you’re into bonuses (and who isn’t?), this place offers some awesome ones. But here’s the trick: don’t just grab every shiny offer. It’s smarter to get reasonable terms than a huge bonus you’ll never be able to withdraw. I’m not saying you should go and bet the farm — please don’t. But if you’ve got a little extra spending money and you’re looking for a fun way to unwind, online casinos can totally deliver. Just stay sharp, know your limits, and don’t treat it like a side hustle. It’s for fun, not for a paycheck. Anyway, just wanted to drop my experience here in case anyone’s looking for solid info or trying to find a trustworthy place to play. If you’ve got your own go-to sites or even some casino nightmares, I’m all ears — love talking shop about this stuff.

Good luck out there, and spin smart, win big ??

Anonymous

billionaire spin (not verified)

on

Mon, 09/08/2025 - 09:31

Hey guys,

I've been checking out the world of virtual casinos lately, and I’ve gotta say — it’s way more exciting than I expected. At first, I was super skeptical. I mean, how do you even believe in an online platform with your cash, right? But after spending hours researching (and trying out a few sketchy sites so you can avoid that mess), I figured out a few things that set apart a legit casino from a complete fraud. First off, if you’re new to all this, here’s the golden rule: **check the license**. If a casino doesn’t have a proper regulatory certificate (like from the Malta Gaming Authority or the UKGC), just walk away. No bonus is worth the risk of never seeing your funds again. Also — and I know no one wants to — go through the small print. That’s the only way to know what kind of wagering requirements they’ve slapped onto those so-called “generous” bonuses.

Now, let me share a site I’ve been hooked on these last few weeks. It’s been a breath of fresh air. The interface? Super clean. Payouts? No waiting around. And the game selection? *Wild*. Slots, live dealers, blackjack, even some unique stuff I hadn’t tried before. Check it out here: <a href="https://dev.to/fasddwq/spiel4-2bne-temp-slug-1166839?preview=322aac12ff6... spin</a> . What really stood out was the help desk. I had a tiny issue with a bonus not working, and they got back to me in like 10 minutes. Compare that to other sites where you’re just shouting into the void — yeah, no thanks.

Also, if you’re into bonuses (and who isn’t?), this place offers some juicy ones. But here’s the trick: don’t just grab every shiny offer. It’s smarter to get reasonable terms than a huge bonus you’ll never be able to withdraw. I’m not saying you should go and bet the farm — please don’t. But if you’ve got a little extra cash and you’re looking for a chill way to spend an evening, online casinos can totally deliver. Just keep your head on, set a budget, and don’t treat it like a side hustle. It’s for fun, not for a paycheck. Anyway, just wanted to drop my experience here in case anyone’s interested or trying to find a good place to play. If you’ve got your own recommendations or even some casino nightmares, I’m all ears — love talking shop about this stuff.

Good luck out there, and spin smart, win big ??

Anonymous

balanceo (not verified)

on

Mon, 09/08/2025 - 11:30

<a href=https://vibromera.es/equilibrado-de-piezas/>equilibrado de piezas</a>

https://vibromera.es/equilibrado-de-piezas/
Maquinas de equilibrado: esenciales para el desempeno suave y eficiente de las maquinas

En el mundo de la ingenieria actual, donde la eficiencia y la fiabilidad del equipo son de maxima importancia, los sistemas de equilibrado desempenan un papel crucial. Estos instrumentos tecnicos estan disenados para compensar el movimiento de partes rotativas, ya sea en maquinaria industrial, medios de transporte o incluso en equipos domesticos.

Para los tecnicos de servicio y los ingenieros, trabajar con tecnologias de equilibrado es indispensable para garantizar el funcionamiento suave y fiable de cualquier sistema rotativo. Gracias a estas innovaciones en equilibrado, es posible disminuir de manera notable las oscilaciones, el sonido no deseado y la presion en los rodamientos, prolongando la vida util de piezas de alto valor.

Igualmente relevante es el papel que ejercen los equipos de balanceo en la atencion al cliente. El soporte tecnico y el servicio periodico utilizando estos sistemas permiten ofrecer soluciones confiables, mejorando la experiencia del usuario.

Para los propietarios, la apuesta en equipos de calibracion y sensores puede ser decisiva para elevar la rentabilidad y rendimiento de sus equipos. Esto es especialmente critico para los empresarios que gestionan pequenas y medianas empresas, donde los recursos deben optimizarse.

Ademas, los equipos de balanceo tienen una versatilidad en el ambito de la prevencion y aseguramiento. Ayudan a prever problemas, previniendo danos financieros y fallos mecanicos. Mas aun, los datos obtenidos de estos sistemas sirven para mejorar la produccion.

Las industrias objetivo de los equipos de balanceo abarcan diversas industrias, desde la industria ciclista hasta el monitoreo ambiental. No importa si se trata de fabricas de gran escala o negocios familiares, los equipos de balanceo son esenciales para mantener la productividad sin fallos.

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.