Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

Tags: 
projects
filament splicer

61640 Comments

Anonymous

StephenFlato (not verified)

on

Fri, 10/03/2025 - 13:59

Подтверждаю. Я присоединяюсь ко всему выше сказанному. Давайте обсудим этот вопрос. Здесь или в PM.
The cumulative bet involves a unique risk, however and/in the event of an unsuccessful choice of only only variant this bet, in [url=https://ecoenergy.com.vn/1xbet-vietnam-betting-online-guide-to-markets/]... the entire bet it is considered lost.

Anonymous

JacobTib (not verified)

on

Fri, 10/03/2025 - 14:07

Ваш пост про розы с доставкой в офис спас мою репутацию - начальница оценила такой внимательный жест в ее день рождения!
<a href=https://t.me/cvetaevatomskru/465>купить розы в томске</a>

Anonymous

Jacobopick (not verified)

on

Fri, 10/03/2025 - 15:19

Как хорошо, что вы ведете рубрику "вопрос-ответ" в соцсетях! Получила консультацию и заказала идеальные розы на Новый год!
<a href=https://vk.com/wall-61709230_7285>заказать цветы томск</a>

Anonymous

JacobTib (not verified)

on

Fri, 10/03/2025 - 15:31

Ваши видео с сборкой букетов завораживают! Заказала такие же розы на 8 Марта - мама сказала, что это искусство!
<a href=https://vk.com/wall-61709230_7282>заказ цветов томск</a>

Anonymous

JacobTib (not verified)

on

Fri, 10/03/2025 - 15:35

Ваш пост про "мужские" букеты на 23 февраля помог удивить мужа - он ценит нестандартные подходы!
<a href=https://vk.com/wall-61709230_7326>заказать цветы с доставкой в томске</a>

Anonymous

Makarsoots (not verified)

on

Fri, 10/03/2025 - 15:47

Я заказывал изготовление прототипа, и всё прошло отлично. Заказ выполнили в короткие сроки, при этом точность печати впечатляет. Менеджеры подробно объяснили согласовать все технические детали. Очень выгодные условия, а поддержка специалистов доказали, что здесь ценят клиентов. Советую всем друзьям, кто нуждается в услугах 3D-принтера: <a href=https://prashnottar.mantrakshar.co.in/index.php?qa=151505&qa_1=%D0%BF%D0.... Наши специалисты обеспечивают максимальную детализацию и точность печати, чтобы каждая деталь соответствовала макету.

Anonymous

FreddyMiZ (not verified)

on

Fri, 10/03/2025 - 15:47

cheap tadalafil online <a href=" http://maps.google.lv/url?sa=t&url=https://tadalmedspharmacy.com ">tadalafil soft tabs</a> and pharmacy online tadalafil <a href=" https://www.freshdew.tv/user/yfltrzjhmy/?um_action=edit ">tadalafil tablets in india</a>
https://clients1.google.vu/url?q=https://tadalmedspharmacy.com tadalafil tablet buy online and http://lzdsxxb.com/home.php?mod=space&uid=5216532 tadalafil brand name in india
[url=https://www.google.cd/url?sa=t&url=https://tadalmedspharmacy.com]buy tadalafil europe[/url] order tadalafil 20mg and [url=http://foru1f40m.bunbun000.com/bbs/home.php?mod=space&uid=9694327]tadalafil online no prescription[/url] tadalafil tablets 20 mg buy

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.