Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

73450 Comments

Anonymous

ForestWhisperR4apold (not verified)

on

Wed, 10/01/2025 - 23:18

Je suis irresistiblement bande par WildRobin Casino, c'est un bosquet ou chaque pari lance une fleche de succes. Les branches forment un labyrinthe de mecaniques ingenieuses, avec des slots aux themes Robin Hood qui font vibrer les cordes. L'assistance decoche des reponses precises, accessible par signal ou appel direct. Les transferts sprintent stables et acceleres, occasionnellement des embuscades promotionnelles plus frequentes dynamiseraient le repaire. En apotheose legendaire, WildRobin Casino forge une legende de jeu heroique pour ceux qui visent leur destin en ligne ! De surcroit le portail est une clairiere visuelle imprenable, amplifie l'engagement dans le repaire du jeu.
<a href=https://www.theasbestossurveylondon.co.uk/wild-robin-casino-comment-les-... animateur radio wild m6</a>|

Anonymous

Leonardvam (not verified)

on

Wed, 10/01/2025 - 23:43

<a href=https://t.me/Lucky_Jetr>Лаки Джет Играть</a> Lucky Jet (Лаки Джет) — ваша возможность оседлать удачу! Динамичная игра Lucky Jet уже ждет вас. Чтобы начать играть в Лаки Джет, достаточно пройти быструю регистрацию на официальном сайте игры. Если он недоступен, воспользуйтесь рабочим зеркалом Лаки Джет. Ищете, где сыграть? Lucky Jet 1win — одна из проверенных площадок. Lucky Jet 1вин предоставляет полную версию развлечения. Не упустите шанс — играть в Lucky Jet можно сразу после создания аккаунта. Официальный сайт Lucky Jet или его зеркало — ваш надежный старт!

Anonymous

Leonardvam (not verified)

on

Wed, 10/01/2025 - 23:50

<a href=https://t.me/Lucky_Jetr>Lucky Jet Зеркало</a> Lucky Jet (Лаки Джет) — ваша возможность оседлать удачу! Динамичная игра Lucky Jet уже ждет вас. Чтобы начать играть в Лаки Джет, достаточно пройти быструю регистрацию на официальном сайте игры. Если он недоступен, воспользуйтесь рабочим зеркалом Лаки Джет. Ищете, где сыграть? Lucky Jet 1win — одна из проверенных площадок. Lucky Jet 1вин предоставляет полную версию развлечения. Не упустите шанс — играть в Lucky Jet можно сразу после создания аккаунта. Официальный сайт Lucky Jet или его зеркало — ваш надежный старт!

Anonymous

JacobTib (not verified)

on

Thu, 10/02/2025 - 00:17

Ваши видео с процессами сборки букетов завораживают! Заказала такие же розы на День влюбленных - получилось даже лучше, чем ожидала!
<a href=https://vk.com/wall-61709230_7275>заказать цветы томск</a>

Anonymous

JacobTib (not verified)

on

Thu, 10/02/2025 - 00:18

Ваши видео с доставкой букетов дарят веру в человеческую доброту! Заказала розы мужу на 23 февраля - он был тронут!
<a href=https://t.me/cvetaevatomskru/347>купить пионы томск</a>

Anonymous

JacobTib (not verified)

on

Thu, 10/02/2025 - 00:18

Как хорошо, что вы показываете сезонные предложения! Успела заказать осенние розы с ягодами для мамы на День матери!
<a href=https://t.me/cvetaevatomskru/475>заказать цветы с доставкой в томске</a>

Anonymous

JacobTib (not verified)

on

Thu, 10/02/2025 - 00:37

Спасибо за идеи для фотосессий с розами! Использовала ваш новогодний букет для семейных фото - получилось волшебно!
<a href=https://vk.com/wall-61709230_7326>заказ цветов томск с доставкой</a>

Pages

Add your comment

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.