Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

Tags: 
projects
filament splicer

56478 Comments

Anonymous

DanielSoulp (not verified)

on

Tue, 09/30/2025 - 19:24

It’s no secret how President Donald Trump feels about sports teams turning away from Native American mascots. He’s repeatedly called for the return of the Washington Redskins and Cleveland Indians, claiming their recent rebrands were part of a “woke” agenda designed to erase history.

But one surprising team has really gotten the president’s attention: the Massapequa Chiefs.

The Long Island school district has refused to change its logo and name under a mandate from New York state banning schools from using team mascots appropriating Indigenous culture. Schools were given two years to rebrand, but Massapequa is the lone holdout, having missed the June 30 deadline to debut a new logo.
[url=https://kra-34.com]kra38 cc[/url]
The district lost an initial lawsuit it filed against the state but now has the federal government on its side. In May, Trump’s Department of Education intervened on the district’s behalf, claiming the state’s mascot ban is itself discriminatory.

Massapequa’s Chiefs logo — an American Indian wearing a yellow feathered headdress — is expected to still be prominently displayed when the fall sports season kicks off soon, putting the quiet Long Island hamlet at the center of a political firestorm.
[url=https://kra---40at.ru]kra38 сс[/url]
The district is now a key “battleground,” said Oliver Roberts, a Massapequa alum and the lawyer representing the school board in its fresh lawsuit against New York claiming that the ban is unconstitutional and discriminatory.

The Trump administration claims New York’s mascot ban violates Title VI of the Civil Rights Act of 1964, which prohibits recipients of federal funds from engaging in discriminatory behavior based on race, color or national origin — teeing up a potentially precedent-setting fight.

The intervention on behalf of Massapequa follows a pattern for a White House that has aggressively applied civil rights protections to police “reverse discrimination” and coerced schools and universities into policy concessions by withholding federal funds.

“Our goal is to assist nationally,” Roberts said. “It’s us putting forward our time and effort to try and assist with this national movement and push back against the woke bureaucrats trying to cancel our country’s history and tradition.”
kra40 cc
https://kra-40-cc.net

Anonymous

Michaelcok (not verified)

on

Tue, 09/30/2025 - 19:45

Lying down and vomiting between courses: This is how Ancient Romans would feast
[url=https://rutorclubwiypaf63caqzlqwtcxqu5w6req6h7bjnvdlm4m7tddiwoyd.com]рутор сайт[/url]
Imagine, if you will, the most glorious festive feast, with an oversize turkey, stuffing two ways, holiday ham, the requisite fixings and at least half a dozen pies and cakes. That may all sound grand — that is, until you consider the extravagant displays of the ancient Roman banquet.

Members of the Roman upper classes regularly indulged in lavish, hours-long feasts that served to broadcast their wealth and status in ways that eclipse our notions of a resplendent meal. “Eating was the supreme act of civilization and celebration of life,” said Alberto Jori, professor of ancient philosophy at the University of Ferrara in Italy.
https://rutor8.net
rutorforum.at
Ancient Romans enjoyed sweet and salty concoctions. Lagane, a rustic short pasta usually served with chickpeas, was also used to make a honey cake with fresh ricotta cheese. The Romans used garum, a pungent, salty fermented fish sauce for umami flavor in all dishes, even as a dessert topping. (For context, garum has a similar flavor profile and composition to current-day Asian fish sauces such as Vietnam’s nuoc mam and Thailand’s nam pla.) The prized condiment was made by leaving fish meat, blood and guts to ferment inside containers under the Mediterranean sun.
Game meat such as venison, wild boar, rabbit and pheasant along with seafood like raw oysters, shellfish and lobster were just some of the pricey foods that made regular appearances at the Roman banquet.

What’s more, hosts played a game of one-upmanship by serving over-the-top, exotic dishes like parrot tongue stew and stuffed dormouse. “Dormouse was a delicacy that farmers fattened up for months inside pots and then sold at markets,” Jori said. “While huge quantities of parrots were killed to have enough tongues to make fricassee.”
https://rutor24.dev
rutor-24forum.com
Giorgio Franchetti, a food historian and scholar of ancient Roman history, recovered lost recipes from these repasts, which he shares in “Dining With the Ancient Romans,” written with “archaeo-cook” Cristina Conte. Together, the duo organize dining experiences at archaeological sites in Italy that give guests a taste of what eating like a Roman noble was all about. These cultural tours also delve into the eyebrow-raising rituals that accompanied these meals.

Anonymous

JacobTib (not verified)

on

Tue, 09/30/2025 - 19:50

Как хорошо, что подписана на вашу страницу! Увидела пост про акцию на День матери и успела заказать маме роскошные розы!
<a href=https://vk.com/wall-61709230_7301>купить розы в томске</a>

Anonymous

JacobTib (not verified)

on

Tue, 09/30/2025 - 20:56

Как хорошо, что вы показываете букеты в разных ценовых категориях! Смогла подобрать роскошные розы на 8 Марта по доступной цене!
<a href=https://t.me/cvetaevatomskru/598>купить розы в томске</a>

Anonymous

JacobTib (not verified)

on

Tue, 09/30/2025 - 20:57

Ваши фото букетов с добавлением сухоцветов вдохновили на заказ осенних роз для учительницы - очень стильно получилось!
<a href=https://t.me/cvetaevatomskru/30>доставка цветов в томске</a>

Anonymous

JacobTib (not verified)

on

Tue, 09/30/2025 - 21:18

Спасибо за идеи с сюрпризами в букетах! Спрятала в розы на 14 февраля билеты на концерт - был самый романтичный вечер!
<a href=https://vk.com/wall-61709230_7284>купить цветы в томске</a>

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.