Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

Tags: 
projects
filament splicer

55541 Comments

Anonymous

Link building (not verified)

on

Sun, 09/28/2025 - 22:10

<a href=https://kwork.com/offpageseo/34787283/link-pyramid-tier-1-tier-2-tier-3>... pyramid tier 1 tier 2 tier 3</a>
Inbound links for SEO include anchor links and their non-anchor counterparts.

Anchor texts include the main keyword, as the key query is fundamental for SEO performance.

Non-anchor links are equally significant – they represent plain URLs, while user interaction is important because it creates a route for search robots; search engines access the site and subsequent pages, which is useful the site.

Updates are shared through ahrefs. When the number of links is limited for one of the services, I report on the platform with the highest count of backlinks due to indexing delays.

Anonymous

Leroyboync (not verified)

on

Sun, 09/28/2025 - 22:17

<a href=https://t.me/detivetrachat>кайт школа хургада</a> Кайт школа в Хургаде DetiVetra – это оазис знаний и мастерства, где опытные инструкторы, словно проводники, помогут вам сделать первые шаги в этом захватывающем виде спорта. Инновационные методики обучения, индивидуальный подход и сертифицированное оборудование гарантируют безопасность и эффективность обучения.

Anonymous

Louisoxilk (not verified)

on

Sun, 09/28/2025 - 22:39

<a href=https://empathycenter.ru/preparations/g/gabapentin/>габапентин от чего помогает простыми словами</a> Габапентин: Будьте внимательны! Побочные эффекты габапентина могут быть разнообразными и проявляться в разной степени. Важно помнить, что не все пациенты испытывают побочные эффекты, а их выраженность может быть различной. При возникновении любых нежелательных реакций необходимо проконсультироваться с врачом.

Anonymous

Louisoxilk (not verified)

on

Sun, 09/28/2025 - 22:43

<a href=https://empathycenter.ru/preparations/g/gabapentin/>габапентин действие</a> Габапентин: Объясняем сложные вещи просто Представьте нервную систему как запутанную сеть проводов. Боль – это электрический импульс, несущийся по этим проводам. При повреждении или раздражении нервов, сигнал усиливается, вызывая нестерпимую боль. Габапентин – это щит, который снижает чувствительность этих "проводов", уменьшая интенсивность болевого сигнала.

Anonymous

RichardBaide (not verified)

on

Sun, 09/28/2025 - 22:48

<a href=https://www.singlevisioninc.org>kraken актуальные ссылки</a> kraken onion, kraken onion ссылка, kraken onion зеркала, kraken рабочая ссылка onion, сайт kraken onion, kraken darknet, kraken darknet market, kraken darknet ссылка, сайт kraken darknet, kraken актуальные ссылки, кракен ссылка kraken, kraken официальные ссылки, kraken ссылка тор, kraken ссылка зеркало, kraken ссылка на сайт, kraken онион, kraken онион тор, кракен онион, кракен онион тор, кракен онион зеркало, кракен даркнет маркет, кракен darknet, кракен onion, кракен ссылка onion, кракен onion сайт, kra ссылка, kraken сайт, kraken актуальные ссылки, kraken зеркало, kraken ссылка зеркало, kraken зеркало рабочее, актуальные зеркала kraken, kraken сайт зеркала, kraken маркетплейс зеркало, кракен ссылка, кракен даркнет

Anonymous

internal traffic (not verified)

on

Sun, 09/28/2025 - 23:45

<a href=https://kwork.com/offpageseo/33870541/internal-traffic-from-medium-com-f... traffic</a>
SEO-friendly backlinks.

A DoFollow link passes link juice from the source site, and all links are checked thoroughly for the absence of NoFollow tags.

You will receive a work report in a plain text format with the URLs of websites with your link published.

We advise to use contextual links with semantic link phrases; additional options are available — listed underneath:

Choice 1 — write an original post
Second option — an article is dynamically rewritten to ensure uniqueness, since algorithms reward dynamic content updates.

We suggest a 30% anchor / 70% non-anchor link distribution.

Anonymous

JacobTib (not verified)

on

Mon, 09/29/2025 - 00:47

Спасибо за идеи с персонализированными открытками! Заказала розы на 8 Марта с персональным поздравлением - мама сохранила открытку!
<a href=https://vk.com/wall-61709230_7285>купить цветы в томске</a>

Anonymous

JacobTib (not verified)

on

Mon, 09/29/2025 - 00:47

Как я рада, что нашла ваш аккаунт по хештегу! Заказала розы на 8 Марта - все подруги спрашивали, где такой красивый букет!
<a href=https://vk.com/wall-61709230_7301>купить пионы томск</a>

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.