Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

Tags: 
projects
filament splicer

54456 Comments

Anonymous

zestycandycrow6apold (not verified)

on

Fri, 09/26/2025 - 21:19

Estou alucinado com SpellWin Casino, parece um portal mistico cheio de adrenalina. As opcoes de jogo no cassino sao ricas e hipnotizantes, incluindo jogos de mesa de cassino com um toque de magia. O atendimento ao cliente do cassino e um feitico de eficiencia, respondendo mais rapido que um estalo magico. Os pagamentos do cassino sao lisos e blindados, mesmo assim mais giros gratis no cassino seria uma loucura magica. No fim das contas, SpellWin Casino e um cassino online que e um portal de diversao para quem curte apostar com estilo mistico no cassino! De lambuja a navegacao do cassino e facil como um passe de magica, o que torna cada sessao de cassino ainda mais encantadora.
<a href=https://www.grupotauro.com.mx/2025/09/02/vivencie-a-adrenalina-do-spellw... bonus</a>|

Anonymous

BrandonAnymn (not verified)

on

Fri, 09/26/2025 - 21:21

It’s no secret how President Donald Trump feels about sports teams turning away from Native American mascots. He’s repeatedly called for the return of the Washington Redskins and Cleveland Indians, claiming their recent rebrands were part of a “woke” agenda designed to erase history.

But one surprising team has really gotten the president’s attention: the Massapequa Chiefs.

The Long Island school district has refused to change its logo and name under a mandate from New York state banning schools from using team mascots appropriating Indigenous culture. Schools were given two years to rebrand, but Massapequa is the lone holdout, having missed the June 30 deadline to debut a new logo.
[url=https://kra38at.net]kra39[/url]
The district lost an initial lawsuit it filed against the state but now has the federal government on its side. In May, Trump’s Department of Education intervened on the district’s behalf, claiming the state’s mascot ban is itself discriminatory.

Massapequa’s Chiefs logo — an American Indian wearing a yellow feathered headdress — is expected to still be prominently displayed when the fall sports season kicks off soon, putting the quiet Long Island hamlet at the center of a political firestorm.
[url=https://kra40.net]kra40 cc[/url]
The district is now a key “battleground,” said Oliver Roberts, a Massapequa alum and the lawyer representing the school board in its fresh lawsuit against New York claiming that the ban is unconstitutional and discriminatory.

The Trump administration claims New York’s mascot ban violates Title VI of the Civil Rights Act of 1964, which prohibits recipients of federal funds from engaging in discriminatory behavior based on race, color or national origin — teeing up a potentially precedent-setting fight.

The intervention on behalf of Massapequa follows a pattern for a White House that has aggressively applied civil rights protections to police “reverse discrimination” and coerced schools and universities into policy concessions by withholding federal funds.

“Our goal is to assist nationally,” Roberts said. “It’s us putting forward our time and effort to try and assist with this national movement and push back against the woke bureaucrats trying to cancel our country’s history and tradition.”
kra39 at
https://kra--40-cc.ru

Anonymous

DanielDum (not verified)

on

Fri, 09/26/2025 - 22:26

[b]Visualize[/b] coming home to find leak spreading through the rooms, belongings, and family treasures.
[b]It’s devastating[/b] — but you don’t have to face it alone.
[b]We’re here to protect[/b] your home and your family’s comfort, acting quickly and carefully to contain the problem at once. Our team works with care and safety, restoring not just your property but also your peace of mind.
[b]We help you[/b] stop mold and long-term consequences, ensuring a healthier space for your loved ones. And with our round-the-clock help, you’re always supported through emergencies — we’re here whenever you need us!
[b][u]Call - 8338561951 and professionals will help you![/u][/b]

Anonymous

AustinFeest (not verified)

on

Fri, 09/26/2025 - 22:28

Весьма ценная штука
Il gameplay e abbastanza semplice e ideale si adatta a bisogni [url=https://shriambikapublic.com/?p=22788]https://shriambikapublic.com/?p=22... principianti. Questo viene fornito solo dopo controlli approfonditi che in riguardano principalmente i sistemi crittografia/ codifica dati inseriti da utenti e il corretto funzionamento di Software rng che regola tutti i tipi di giochi.

Anonymous

JoshuaPoubs (not verified)

on

Fri, 09/26/2025 - 22:44

Эта блестящая идея придется как раз кстати
Совет: ежели вы изучаете слово с русского на итальянский, [url=https://russkoitalslovar.ru/%D0%BC%D0%B0%D0%BA%D1%81%D0%B8%D0%BC%D1%83%D... то обзательно проверьте данное слово а также итальянского на русский.

Anonymous

Link building (not verified)

on

Fri, 09/26/2025 - 23:17

<a href=https://kwork.com/offpageseo/34787283/link-pyramid-tier-1-tier-2-tier-3>... pyramid tier 1 tier 2 tier 3</a>
Inbound links for SEO are divided into two main types: anchor and non-anchor backlinks.

Anchor texts contain a key query, because this keyword is essential for search engine ranking.

Non-anchor backlinks are just as important – this includes plain URLs, and the ability to click plays a key role as it creates access for bots; crawlers navigate the target page and subsequent pages, which is useful website.

Updates are shared through semrush. If there are fewer links for one of the services, updates are provided on the service with the highest count in backlink volume due to indexing delays.

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.