Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

Tags: 
projects
filament splicer

50059 Comments

Anonymous

RaymondAdolf (not verified)

on

Sat, 09/13/2025 - 21:42

canadian pharmacy prices <a href=" https://images.google.at/url?q=https://truenorthpharm.com ">canadian pharmacy phone number</a> or pharmacy com canada <a href=" http://nosugar.co.uk/profile.php?uid=204390 ">canadian pharmacy service</a>
http://gb.poetzelsberger.org/show.php?c453c4=pharmalibrefrance.com canada pharmacy online and http://lostfilmhd.com/user/gipkyrhspm/ canadian pharmacy 365
[url=http://images.google.la/url?q=https://truenorthpharm.com]canada drugstore pharmacy rx[/url] canadianpharmacy com or [url=https://www.packadvisory.com/user/lyfooxoqlj/]canadian family pharmacy[/url] canada drugs online

Anonymous

DavidCleta (not verified)

on

Sat, 09/13/2025 - 22:04

Стою перед стеллажом с красками, и голова идет кругом. Такое ощущение, что я попал в художественный магазин без всякого представления о том, что хочу нарисовать. Проблема в том, что я затеял обновление гостиной, и цвет стен, как мне казалось, должен был быть самой простой частью этого процесса. Но вот уже третий день я смотрю на эти бесконечные палитры, и любая уверенность в своих дизайнерских способностях улетучивается.
Потом еще возникает вопрос о типе краски. Матовая, глянцевая, полуматовая? Для гостиной, наверное, матовая предпочтительнее, чтобы скрыть мелкие неровности стен. Но, говорят, она менее стойкая к загрязнениям. А у меня маленький ребенок и собака! Получается, в любом случае придется выбирать между красотой и практичностью.
Уже все глаза сломал, рассматривая эти маленькие образцы на картонках. В магазине освещение совершенно другое, чем у меня дома, так что я понятия не имею, как выбранный цвет будет выглядеть в реальной обстановке. И главное, хочется создать уютную и стильную атмосферу, а не просто покрасить стены ради покраски.
Может, у вас есть какой-то личный опыт в выборе краски для гостиной? Какие цвета оказались наиболее удачными и практичными? Буду очень признателен за любые советы и рекомендации! Интересует [url=https://obovsem.myqip.ru/?1-5-0-00000750-000-0-0-1753944168]Декоративные краски.[/url]

Anonymous

plinko romania (not verified)

on

Sat, 09/13/2025 - 22:47

Hey folks,

I've been checking out the world of online gaming lately, and I’ve gotta say — it’s way more exciting than I expected. At first, I was honestly suspicious. I mean, how do you even rely on an online platform with your hard-earned money, right? But after doing a ton of research (and trying out a few dodgy sites so you can avoid that mess), I figured out a few things that set apart a reliable casino from a complete fraud. First off, if you’re new to all this, here’s the golden rule: **regulation is key**. If a casino doesn’t have a proper regulatory certificate (like from the Malta Gaming Authority or the UKGC), just run. No bonus is worth the trouble of never seeing your funds again. Also — and I know no one wants to — check the terms. That’s the only way to know what kind of playthrough limits they’ve slapped onto those so-called “generous” bonuses.

Now, let me share a site I’ve been using these last few weeks. It’s been a total win. The interface? Super easy to navigate. Payouts? No waiting around. And the game selection? *Massive*. Slots, live dealers, blackjack, even some unique stuff I hadn’t tried before. Check it out here: <a href="https://flokii.com/users/view/113929/activity_id:734107">plinko romania</a> . What really won me over was the help desk. I had a tiny issue with a bonus not working, and they got back to me in like no time. Compare that to other sites where you’re just shouting into the void — yeah, not worth it.

Also, if you’re into bonuses (and who isn’t?), this place offers some juicy ones. But here’s the trick: don’t just go crazy over promos. It’s smarter to go for fair terms than a huge bonus you’ll never be able to withdraw. I’m not saying you should go and bet the farm — please don’t. But if you’ve got a little extra fun budget and you’re looking for a bit of online excitement, online casinos can totally deliver. Just play smart, know your limits, and don’t treat it like a side hustle. It’s for fun, not for a paycheck. Anyway, just wanted to drop my experience here in case anyone’s curious or trying to find a trustworthy place to play. If you’ve got your own recommendations or even some wild losses, I’m all ears — love talking shop about this stuff.

Good luck out there, and don’t let the house win too much ??

Anonymous

Shanebaike (not verified)

on

Sat, 09/13/2025 - 23:39

pharmacy in mexico <a href=" https://clients1.google.com.vc/url?q=https://saludfrontera.com ">mexico medication</a> or medicine mexico <a href=" https://byr.cc/home.php?mod=space&uid=569580 ">mexican pharmacy that ships to the us</a>
https://clients1.google.bg/url?q=https://saludfrontera.com mexican pharmacy menu and https://www.news-adhoc.com/author/egvnvgpgsy/ mexico medicine
[url=http://www.kukuts.info/engine/redirect.php?url=http://bluepharmafrance.c... in mexico pharmacy[/url] worldwide pharmacy or [url=https://radiationsafe.co.za/user/uimfrteimy/?um_action=edit]farmacia mexicana online[/url] mexican pharmacy menu

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.