Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

Tags: 
projects
filament splicer

39398 Comments

Anonymous

AgnesRag (not verified)

on

Fri, 07/25/2025 - 01:39

in {search engine|row|window} {all {available|required|required} matches of the betwinner #file_links["C:\Users\Admin\Desktop\file\gsa+en+one4anotherBetwinnerTeam072511P2URLBB.txt",1,N]. {more|over|more} 25 different {promotions|bonuses} and {opportunities|offers} for {new|new|beginners|amateurs|neophytes} or old customers. The {target|specific} audience was residents of the EU and CIS countries.

Anonymous

Capavig (not verified)

on

Fri, 07/25/2025 - 02:06

у мня уже есть
тем же обширным является набор доступных платежных способов для обращения средств, [url=http://lifeplitka.ru/]http://lifeplitka.ru/[/url] а для вождения счетами и аккаунтами пользователям дается многофункциональный личный кабинет.

Anonymous

Coreyvat (not verified)

on

Fri, 07/25/2025 - 02:19

Indian and Chinese travelers hail end of visa freeze between world’s two most populous nations as diplomatic tensions thaw
[url=https://znack2.com/rezonans/item/35962-gemcy-gem-cy-novaya-piramida-vasi...гей член[/url]
They are the two most populous countries in the world and neighbors clamoring for more tourists, but for much of the last five years it has been difficult for Indian and Chinese nationals to vacation in each other’s nations.

Now that looks set to finally change as previous fractious relations between the two Asian giants finally begin to thaw.
https://premium-wood-msk.ru/15112024/roman-vasilenko-poslednie-novosti/
анальный секс смотреть
India will issue tourist visas for Chinese citizens for the first time in five years, allowing nationals from its neighboring country to freely visit each other, marking a significant reset in relations after a deadly border clash sent ties into a deep freeze.

From Thursday, July 24, Chinese citizens can apply for tourist visas to India, the Indian embassy in Beijing said Wednesday.

This “positive news” is in the “common interests of all parties,” China’s foreign spokesperson Guo Jiakun said. “China is willing to maintain communication and consultation with India to continuously improve the level of facilitation of personnel exchanges between the two countries.”

There has been a gradual normalization of ties between India and China in recent months after relations were deeply strained in June 2020, when a brutal hand-to-hand battle in the Galwan Valley left at least 20 Indian and four Chinese soldiers dead.

Both nations maintain a heavy military presence along their 2,100-mile (3,379-kilometer) de facto border, known as the Line of Actual Control (LAC) – a boundary that remains undefined and has been a persistent source of friction since their bloody 1962 war.

The 2020 clash in the disputed region between Indian Ladakh and Chinese-controlled Aksai Chin marked the first deadly confrontation along India and China’s disputed border in more than 40 years.

Anonymous

EdwinWat (not verified)

on

Fri, 07/25/2025 - 03:02

<a href=https://practical-office.ru/>мебель для кабинета руководителя</a> Офисная мебель купить в Москве – это процесс, требующий тщательного анализа и понимания потребностей компании. На рынке представлено огромное количество вариантов, от бюджетных моделей до эксклюзивных коллекций. Выбор мебели должен основываться не только на эстетических предпочтениях, но и на функциональности, эргономике и долговечности. Важно учитывать размеры помещения, количество сотрудников и специфику работы.

Anonymous

RobertVap (not verified)

on

Fri, 07/25/2025 - 03:08

where can i get tadalafil <a href=" http://clubdetenisalbatera.es/user/gtdgykpbwx/ ">tadalafil 20mg lowest price</a> or <a href=" https://maps.google.bi/url?sa=t&url=https://tadalafilfromindia.com ">tadalafil mexico</a>
https://hjn.secure-dbprimary.com/service/util/logout/CookiePolicy.action... tadalafil over the counter uk
[url=https://images.google.com.tr/url?sa=t&url=https://tadalafilfromindia.com... online canada[/url] tadalafil 5 mg tablet coupon and [url=http://jonnywalker.net/user/vpqejlhbhp/]20 mg tadalafil cost[/url] tadalafil canadian pharmacy price

Anonymous

Shannonwar (not verified)

on

Fri, 07/25/2025 - 03:11

Прошу прощения, что я вмешиваюсь, но мне необходимо немного больше информации.
в пределах опроса изучался пользовательский практика, при поиске информации перед приобретением [url=https://rtl24.ru/zakipela-mashina-prichiny-posledstvija-i-chto/]https://... автомобиля. Сегодня Авито Авто посещают более 36 миллионов игроков в месяц.

Anonymous

DonaldJef (not verified)

on

Fri, 07/25/2025 - 03:56

<a href=https://redseakite.ru/>кайтсёрфинг</a> Кайтсёрфинг оборудование – это сложный механизм, требующий внимательного выбора. Кайт, доска, стропы, планка, трапеция – каждый элемент играет свою роль в обеспечении комфорта и безопасности катания.

Anonymous

CrystalOvast (not verified)

on

Fri, 07/25/2025 - 05:40

Какие слова...
#file_links["C:\Users\Admin\Desktop\file\gsa+ja+PhoenixPBNcryptcasino.jp1075T2k10k819P2URLBB.txt",1,N] ???{deposit|attachment}??{you|users}?????{game|gameplay}????????{??|????}??????????? {???/???|????}?{???|?}{??|??|??}{??|?????}????????????{??|?????|???}{??|??|???????}?{???|???|??|??

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.