Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

35990 Comments

Anonymous

Davidbef (not verified)

on

Mon, 05/12/2025 - 20:07

Belief BS-ACV–L3-263 A93 - конденсатор воздушного охлаждения, выполнен из медных трубок с поперечными пластинами оребрения из алюминия, корпус изготовлен из окрашенной стали https://first-industrial.ru/catalog/page/9

Эта серия продуктов имеет следующие характеристики:
Belief BS-ACV–T9-245 C36 - конденсатор воздушного охлаждения, выполнен из медных трубок с поперечными пластинами оребрения из алюминия, корпус изготовлен из окрашенной стали https://first-industrial.ru/catalog/chiller/chiller-ballu-machine-bmca-m...

Цена по запросу https://first-industrial.ru/catalog/chiller/chiller-climacore-cda-hp-039

Цена по запросу https://first-industrial.ru/catalog/chiller/chiller-climacore-lda-hp-090

Цена по запросу https://first-industrial.ru/catalog/ispariteli/0345-1-kozhuhotrubnyj-isp...

Anonymous

Davidbef (not verified)

on

Mon, 05/12/2025 - 20:07

Belief BS-ACV–Q8-245 B30 - конденсатор воздушного охлаждения, выполнен из медных трубок с поперечными пластинами оребрения из алюминия, корпус изготовлен из окрашенной стали https://first-industrial.ru/catalog/chiller/chiller-bom-2-kvt

Конденсаторы воздушного охлаждения https://first-industrial.ru/news/prodazha-chillera-grs-200
Руководство по выбору https://first-industrial.ru/catalog/ispariteli/0300-1-kozhuhotrubnyj-isp...

Заказать обратный звонок https://first-industrial.ru/portfolio/zao-tauras-feniks

ГК НОВЫЕ ТЕХНОЛОГИИ https://first-industrial.ru/catalog/chiller/chiller-climacore-lda-hp-090

В любом случае при эксплуатации рекомендуется тщательно следить за чистотой конденсатора https://first-industrial.ru/catalog/chiller/chiller-rhoss-tcevbz-1200
Это обеспечит долгосрочную и бесперебойную работу всего холодильного оборудования https://first-industrial.ru/catalog-category/chiller/page/8

Каталог товаров https://first-industrial.ru/catalog/chiller/chiller-climacore-wda-hp-039

Anonymous

Davidbef (not verified)

on

Mon, 05/12/2025 - 20:09

Бренд Belief Модель BS-ACС–A3-125 А2 https://first-industrial.ru/catalog/chiller/chiller-bom-4-kvt
9 Номинальная мощность 2 https://first-industrial.ru/catalog/page/13
9 кВт https://first-industrial.ru/catalog/gidromoduli/gidromodul-2nm-80-16b-a

Для функционирования водяных конденсаторов для холодильного агрегата применяется вода обратного водоснабжения https://first-industrial.ru/catalog/chiller/chiller-climacore-wda-ev-045
На выходе температура конденсации воды повышается на 5 градусов https://first-industrial.ru/catalog/freon/023-freon-r23-hladon-r23
Купить воздушный конденсатор кожухотрубного типа можно на страницах нашего сайта https://first-industrial.ru/news/vypolnenie-rabot-na-oao-sloteks

Теплообменники кожухотрубные https://first-industrial.ru/portfolio/ooo-prodakshen-lajn

Belief BS-ACV–Q7-245 A24 - конденсатор воздушного охлаждения, выполнен из медных трубок с поперечными пластинами оребрения из алюминия, корпус изготовлен из окрашенной стали https://first-industrial.ru/catalog/drycooler/017-1-drajkuler-thermokey-...

По заказу доступны конденсаторы во взрывозащищенном исполнении https://first-industrial.ru/catalog/chiller/chiller-climacore-ssa-hp-06
Ламели толщиной от 0,15 мм и шагом ребер 2,1; 2,5; 2,8 и 3,2 мм https://first-industrial.ru/catalog-category/freon
Шахматная конфигурация https://first-industrial.ru/kontakts.html
Блоки одно и двух контурного исполнения https://first-industrial.ru/catalog/freon/113-freon-r113-hladon-r113
Диаметр вентиляторов: 450;500;630;800;910 (EBMpapst или ZIEHL-ABBEG) Корпусные элементы оцинкованная сталь ESP Оцинк https://first-industrial.ru/catalog/gidromoduli/gidromodul-2nm-65-16b-a
ст (RAL 7044) окрашенная порошковым методом https://first-industrial.ru/portfolio/ao-farmczentr-vilar
Корпусные элементы из нержавеющей стали и спец покрытые ламели – опционально https://first-industrial.ru/infopage.html
Медная труба нарезная Wieland https://first-industrial.ru/catalog/kompressor-freonovyj/009-0-kompresso...
Нержавеющая труба (опция). Упаковка - жесткая деревянная обрешетка рассчитанная на 8000 км перевозки с 3 перегрузками https://first-industrial.ru/catalog/ispariteli/0085-1-kozhuhotrubnyj-isp...
Транспортировочное положение, упаковка и спец защита патрубков облегчит монтаж https://first-industrial.ru/news/kompaniya-piter-holod-avtorizovannyj-pa...
Монтажные ноги входят в стоимость изделия (915 мм).
Belief BS-ACV–R7-363 A130 - конденсатор воздушного охлаждения, выполнен из медных трубок с поперечными пластинами оребрения из алюминия, корпус изготовлен из окрашенной стали https://first-industrial.ru/catalog/kondensator-freonovyj/008-8-kondensa...

Anonymous

GeraldDrief (not verified)

on

Mon, 05/12/2025 - 21:40

Алкогольный запой – это критическое состояние, возникающее при длительном злоупотреблении спиртными напитками, когда организм насыщается токсинами и его жизненно важные системы (сердечно-сосудистая, печёночная, нервная) начинают давать сбой. В такой ситуации необходимо незамедлительное вмешательство специалистов для предотвращения тяжелых осложнений и спасения жизни. Наркологическая клиника «Основа» в Новосибирске предоставляет экстренную помощь с помощью установки капельницы от запоя, позволяющей оперативно вывести токсины из организма, стабилизировать внутренние процессы и создать условия для последующего качественного восстановления.
Углубиться в тему - [url=https://kapelnica-ot-zapoya-novosibirsk8.ru/]kapelnica-ot-zapoya-novosib...

Anonymous

GeraldDrief (not verified)

on

Tue, 05/13/2025 - 00:06

После обращения в клинику «Основа» наш специалист незамедлительно выезжает для оказания экстренной медицинской помощи в Новосибирске. Процесс установки капельницы предусматривает комплексную диагностику и последующее детоксикационное лечение, что позволяет снизить токсическую нагрузку и стабилизировать состояние пациента. Описание процедуры включает следующие этапы:
Ознакомиться с деталями - [url=https://kapelnica-ot-zapoya-novosibirsk8.ru/]вызвать капельницу от запоя на дому в новосибирске[/url]

Anonymous

GeraldDrief (not verified)

on

Tue, 05/13/2025 - 00:32

Алкогольный запой – это критическое состояние, возникающее при длительном злоупотреблении спиртными напитками, когда организм насыщается токсинами и его жизненно важные системы (сердечно-сосудистая, печёночная, нервная) начинают давать сбой. В такой ситуации необходимо незамедлительное вмешательство специалистов для предотвращения тяжелых осложнений и спасения жизни. Наркологическая клиника «Основа» в Новосибирске предоставляет экстренную помощь с помощью установки капельницы от запоя, позволяющей оперативно вывести токсины из организма, стабилизировать внутренние процессы и создать условия для последующего качественного восстановления.
Получить больше информации - [url=https://kapelnica-ot-zapoya-novosibirsk8.ru/]капельница от запоя новосибирск.[/url]

Pages

Add your comment

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.