Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

Tags: 
projects
filament splicer

24139 Comments

Anonymous

xnudes651apold (not verified)

on

Sun, 04/20/2025 - 21:42

The rise and controversy surrounding tools like [url=https://xnudes.app/]DeepNude AI[/url] have sparked important conversations about ethics in artificial intelligence. It's a reminder of the fine line between innovation and misuse when it comes to generative tech.

Anonymous

Sarahagefe (not verified)

on

Sun, 04/20/2025 - 22:52

Naturlich sind die Tachons fur den taglichen|taglichen|Haushalt} {Gebrauch|Tragen/Gebrauch} {in der Kuche/im Kuchenbereich} {auch|dabei} {sind/bleiben/spielen eine Rolle/erfullen Funktionen} {Teil|Mitglied} {unseres/Elite-Sortiments} { #file_links["C:\Users\Admin\Desktop\file\gsa+de+seomaster10k20k100425P2URLBB.txt",1,N].

Anonymous

Chloetrami (not verified)

on

Sun, 04/20/2025 - 23:44

Честное слово.
Этот витамин помогает нашему организму превращать пищу в энергию и принимает [url=https://www.sarbc.ru/link_articles/kak-vybrat-luchshij-vitaminnyj-komple... функционирование нервной системы. Триптофан, являющийся аминокислотой, не может быть синтезирован организмом самостоятельно, из-за этого мы должны получать его с едой.

Anonymous

ClaudeFep (not verified)

on

Sun, 04/20/2025 - 23:49

President Donald Trump speaks about the mid-air crash between American Airlines flight 5342 and a military helicopter in Washington. Roberto Schmidt/AFP/Getty Images
New York
CNN
— [url=https://bsmeat.ru]blacksprut ссылка[/url]
President Donald Trump on Thursday blamed the Federal Aviation Administration’s “diversity push” in part for the plane collision that killed 67 people in Washington, DC. But DEI backers, including most top US companies, believe a push for diversity has been good for their businesses.

Trump did not cite any evidence for how efforts to hire more minorities, people with disabilities and other groups less represented in American workforces led to the crash, saying “it just could have been” and that he had “common sense.” But Trump criticized the FAA’s effort to recruit people with disabilities during Joe Biden’s administration, even though the FAA’s Aviation Safety Workforce Plan for the 2020-2029 period, issued under Trump’s first administration, promoted and supported “the hiring of people with disabilities and targeted disabilities.”
[url=https://at-bs2best-at.ru]blacksprut зеркало[/url]
It’s not the first time opponents of diversity, equity and inclusion initiatives, or DEI, have said they can kill people. “DEI means people DIE,” Elon Musk said after the California wildfires, criticizing the Los Angeles Fire Department and city and state officials for their efforts to advance diversity in their workforces.

блэкспрут даркнет
https://bsme.site

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.