Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

Tags: 
projects
filament splicer

24099 Comments

Anonymous

Jackieglilt (not verified)

on

Sat, 04/19/2025 - 21:45

Прошу прощения, что вмешался... Я разбираюсь в этом вопросе. Приглашаю к обсуждению.
При невыполнении требований, [url=https://1win-casino-zerkal.xyz/]https://1win-casino-zerkal.xyz[/url] средства окажутся аннулированы. весь процедура длится всего несколько минут. вы также имеете возможность скачать программу с официального сайта 1win, следуя аналогичному процессу, как и для android, без потребности изменения настроек устройства.

Anonymous

SherrieisoTh (not verified)

on

Sat, 04/19/2025 - 23:46

Heeft iemand ervaring met Qbet Casino bonussen?

Hallo allemaal, ik heb net het welkomstpakket van Qbet Casino geprobeerd (300% + 150 gratis spins). Na het behalen van de speelvoorwaarden (slechts 35x) kreeg ik mijn uitbetaling binnen 4 uur op Skrill!

Wie heeft er nog meer ervaring met Qbet? Zijn hun live casino dealers echt zo goed als ze zeggen?

Website: https://qbet-casino1.com/

P.S. Hun wekelijkse 10% cashback op sportverliezen is ook echt de moeite waard!"

Anonymous

CarlosMix (not verified)

on

Sun, 04/20/2025 - 00:07

Water and life
[url=https://ethereumok.io/]Eth Mixer[/url]
Lightning is a dramatic display of electrical power, but it is also sporadic and unpredictable. Even on a volatile Earth billions of years ago, lightning may have been too infrequent to produce amino acids in quantities sufficient for life — a fact that has cast doubt on such theories in the past, Zare said.

Water spray, however, would have been more common than lightning. A more likely scenario is that mist-generated microlightning constantly zapped amino acids into existence from pools and puddles, where the molecules could accumulate and form more complex molecules, eventually leading to the evolution of life.

“Microdischarges between obviously charged water microdroplets make all the organic molecules observed previously in the Miller-Urey experiment,” Zare said. “We propose that this is a new mechanism for the prebiotic synthesis of molecules that constitute the building blocks of life.”

However, even with the new findings about microlightning, questions remain about life’s origins, he added. While some scientists support the notion of electrically charged beginnings for life’s earliest building blocks, an alternative abiogenesis hypothesis proposes that Earth’s first amino acids were cooked up around hydrothermal vents on the seafloor, produced by a combination of seawater, hydrogen-rich fluids and extreme pressure.
Yet another hypothesis suggests that organic molecules didn’t originate on Earth at all. Rather, they formed in space and were carried here by comets or fragments of asteroids, a process known as panspermia.

“We still don’t know the answer to this question,” Zare said. “But I think we’re closer to understanding something more about what could have happened.”

Though the details of life’s origins on Earth may never be fully explained, “this study provides another avenue for the formation of molecules crucial to the origin of life,” Williams said. “Water is a ubiquitous aspect of our world, giving rise to the moniker ‘Blue Marble’ to describe the Earth from space. Perhaps the falling of water, the most crucial element that sustains us, also played a greater role in the origin of life on Earth than we previously recognized.”

Anonymous

JenLal (not verified)

on

Sun, 04/20/2025 - 00:49

Ну посиди,жду твоих робот
есть определенные профессии, [url=https://techtablets.com/forum/topic/finding-marketing-platform-for-busin... где для обретения места сертификаты обязательны. Запишите каждую сертификацию, курс или тренинг в обратном хронологическом порядке.

Anonymous

BrianAnore (not verified)

on

Sun, 04/20/2025 - 02:50

вообще супер
Періодично проводите зворотний [url=https://paperpage.in/posts/320608]https://paperpage.in/posts/320608[/url] зв'язки. Мета дозволить вибрати найбільш оптимальні тренінги. Визначте, чи можуть вони адаптувати вміст до специфіки вашої команди.

Anonymous

BenZer (not verified)

on

Sun, 04/20/2025 - 03:25

Аренда автомобиля https://crystalauto.clients.site в Санкт-Петербурге предлагает широкий выбор машин различных марок и классов. Вы сможете выбрать авто, которое подойдет именно вам по цене и комфорту. Прокат авто в Санкт-Петербурге - это отличный способ сэкономить время и деньги, наслаждаясь своей поездкой.

Anonymous

Patrickaspix (not verified)

on

Sun, 04/20/2025 - 03:47

Конечно, никогда нельзя быть уверенным.
{after|upon completion of} creating {an account|their|personal} {account|registration}, players of the #file_links["C:\Users\Admin\Desktop\file\gsa+en+10kPBNbc-casino-mirror.comP2URLBB.txt",1,N] can {make|enter} their {first|1st} deposit using their preferred {cryptocurrency|cryptocurrencies} and {start|start|study the games, available on {hydra|website|resource|platform|portal}.

Anonymous

CharlesThymn (not verified)

on

Sun, 04/20/2025 - 04:28

northwest pharmacy canada <a href=" http://www.dbgjjs.com/home.php?mod=space&uid=519894 ">canadian pharmacy world</a> or <a href=" https://www.google.com.mx/url?q=https://usacanadapharm.com ">canadianpharmacy com</a>
http://clients1.google.co.ao/url?q=https://usacanadapharm.com online canadian pharmacy reviews
[url=https://www.google.sc/url?q=https://usacanadapharm.com]escrow pharmacy canada[/url] canadian pharmacy sarasota and [url=https://forum.beloader.com/home.php?mod=space&uid=1717185]reliable canadian online pharmacy[/url] northwest canadian pharmacy

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.