Filament Splicer

Project cancelled, click here to read why
The idea for Filament Splicer was born about a month after our Ultimaker 3D Printer was build. As cool as 3D Printing is, printing in one color is boring.

Users of normal, single head FFF/FDM printers are stuck with single color unless they join filament pieces together to produce one multi-colored string. It is not very complicated but process is quite awkward and you will get fed up very quickly.

If you want to have proper, stable filament join you need to have right temperature on the tip of plastic when you connect pieces together. This is hard to achieve when you use some arbitrary heat source. You either underheat or overheat and burn the plastic. Using print head of your printer is best 'ad-hoc' solution but it leaves quite a mess on it, you cannot print when you splice and plastic which is in the head slowly gets burned while you take time to splice your string.

Then, of course there is issue with forming of the joint, carpet knife and fingers where our favorite tools for that job but it took quite a long time to form each joint.

We have had our share of failed prints due to broken joints / stuck filament and finally decided to create a device which will help to splice filament. Initial idea was to create fully automated unit: you place filament ends on copper block, close it, push the button and viola - you have your joint. That was the theory.... In practice this is impossible because PLA and ABS expand during heat-up and contract during cool down, this results in either no joint at all or bubble-filled mess.

Many headache filled days [Even best PLA is really nasty stuff when you breath it in for a while] later we dropped the idea and went for 'open' model with precisely manufactured grooves which help to quickly heat up, connect and form joints.

Thermal insulation was another challenge, we wanted to allow up to 260c temperature but nothing could properly insulate enclosure from hot copper block for prolonged period of time. Ceramic fiber thermal tape can take that heat but one needs a lot of it and then there is itching... Chinese tape is horrible and even best branded, made in USA [ThermoTec] tape is not flawless. We eventually gave up on ceramic fibre and went with PFTA [Teflon] plates. Since PFTA can be outright poisonous at high temperatures, we decided to use high quality - made in Europe material - this way we are sure that maximum temperature of 235c is well within safety limit.

Availability

Filament splicer can be pre-ordered via our campaign on Indiegogo, it is available as a DIY kit or fully assembled unit.

 

Assembled
Assembled
Kit
Kit

 

Open Source

Filament splicer blueprints are released under Creative Commons Attribution-NonCommercial 4.0 International License and can be downloaded from Thingiverse and Youmagine.

Tags: 
projects
filament splicer

45017 Comments

Anonymous

LauraCop (not verified)

on

Thu, 04/17/2025 - 18:43

What's next for ozempic and wegovy? Who was ozempic created for? {lower|worse} in {heading|categories|section} "#file_links["C:\Users\Admin\Desktop\file\gsa+en+RDXVNMS8NWP2URLBB.txt",1,N]", you {will find|will be able to find} {everything|absolutely everything} that {you|they} {need|need|need|may need} {say|know|tell} about ozempic, {so that} in {the next|next time}, when {speech|dialogue|conversation} {comes|is being conducted} about {this|this and other} {you|you don't know} don't {have to|had to} pretend {what are you|what|what are you|what are you/what are you/what are you/what are you/what are you/what are you/what are you/what are you/what are you/what are you/what are you/what are you/what are you/what are you/what are you/what are you/what are you You {realize|understand} what you're talking about, and {perhaps|quite probably|maybe} you'll even decide if {this|this} is right for you.

Anonymous

Tanmayniz (not verified)

on

Fri, 04/18/2025 - 01:16

допустим, вы взяли 50 ФС с фиксированной ставкой 5 uah за вращение и максимальным выводом 10 000 uah, и вейджером х 30. первым делом – заходите в слот, [url=http://www.cremis.co.jp/oscommerce/catalog/redirect.php?action=url&goto=... где их реально прокрутить.

Anonymous

MichaelTax (not verified)

on

Fri, 04/18/2025 - 02:09

Наркологическая клиника «Анти-Кризис» в Краснодаре — это профессиональная и быстрая помощь в выведении из запоя. Мы предлагаем:
Детальнее - [url=https://kapelnica-ot-zapoya-krasnodar777.ru/]posle-kapelniczy-ot-zapoya krasnodar[/url]

Anonymous

Albertvon (not verified)

on

Fri, 04/18/2025 - 02:49

Why axolotls seem to be everywhere — except in the one lake they call home
[url=https://kra30s.cc]kraken войти[/url]
Scientist Dr. Randal Voss gets the occasional reminder that he’s working with a kind of superstar. When he does outreach events with his laboratory, he encounters people who are keen to meet his research subjects: aquatic salamanders called axolotls.

The amphibians’ fans tell Voss that they know the animals from the internet, or from caricatures or stuffed animals, exclaiming, “‘They’re so adorable, we love them,’” said Voss, a professor of neuroscience at the University of Kentucky College of Medicine. “People are drawn to them.”
https://kra30s.cc
kra31 cc

Take one look at an axolotl, and it’s easy to see why it’s so popular. With their wide eyes, upturned mouths and pastel pink coloring, axolotls look cheerful and vaguely Muppet-like.

They’ve skyrocketed in pop culture fame, in part thanks to the addition of axolotls to the video game Minecraft in 2021. These unusual salamanders are now found everywhere from Girl Scout patches to hot water bottles. But there’s more to axolotls than meets the eye: Their story is one of scientific discovery, exploitation of the natural world, and the work to rebuild humans’ connection with nature.

A scientific mystery
Axolotl is a word from Nahuatl, the Indigenous Mexican language spoken by the Aztecs and an estimated 1.5 million people today. The animals are named for the Aztec god Xolotl, who was said to transform into a salamander. The original Nahuatl pronunciation is “AH-show-LOAT”; in English, “ACK-suh-LAHT-uhl” is commonly used.
Axolotls are members of a class of animals called amphibians, which also includes frogs. Amphibians lay their jelly-like eggs in water, and the eggs hatch into water-dwelling larval states. (In frogs, these larvae are called tadpoles.)

Most amphibians, once they reach adulthood, are able to move to land. Since they breathe, in part, by absorbing oxygen through their moist skin, they tend to stay near water.

Axolotls, however, never complete the metamorphosis to a land-dwelling adult form and spend their whole lives in the water.

“They maintain their juvenile look throughout the course of their life,” Voss said. “They’re teenagers, at least in appearance, until they die.”

Pages

Add your comment

More information about text formats

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.